A Preliminary Assessment of Machinability of Titanium Alloy Ti 6AL 4 V During thin Wall Machining Using Trochoidal Milling.

Titanium alloys are of great demand in the aerospace and biomedical industries. Most the titanium products are either cast or sintered to required shape and finish machined to get the appropriate surface texture to meet the design requirements. Ti-6Al-4 V is often referred as work horse among the titanium alloys due to its heavy use in the aerospace industry. This paper is an attempt to investigate and improve the machining performance of Ti-6Al-4 V. Thin wall machining is an advance machining technique especially used in machining turbine blades which can be done both in a conventional way and using a special technique known as trochoidal milling. The experimental design consists of conducting trials using combination of cutting parameters such as cutting speed (vc), 90 and 120 m/min; feed/tooth (fz) of 0.25 and 0.35 mm/min; step over (ae) 0.3 and 0.2; at constant depth of cut (ap) 20 mm and using coolant. A preliminary assessment of machinability of Ti-6Al-4 V during thin wall machining using trochoidal milling is done. A correlation established using cutting force, surface texture and dimensional accuracy. [ABSTRACT FROM AUTHOR]