Evaluation of full pelvic ring stresses using a bilateral static gait-phase finite element modeling method.

Trauma to the pelvis is debilitating and often needs fixation intervention. In 58% of patients with this trauma, the injuries can lead to permanent disability, preventing the return to jobs. Of all unsuccessful fixation procedures, 42% are caused by failures of the method, sometimes due to mobilization during healing. Patients would benefit by havibridgetv@comcast.netng fixation hardware in place that enabled ambulation. During walking the bilateral hip joint plus leg and trunk muscle forces, including those from hip motion, can induce torsion into the pelvic ring and across the joint cartilages, and affect the internal stresses of the pelvis. For an accurate understanding, fixation that bridges the bilateral innominate bones needs to be evaluated considering all of these factors, and the affect on the stresses throughout the pelvic ring. Yet there is no bilateral, comprehensive method to do so in the literature. In this study a method was developed that incorporates all of the necessary factors in four bilateral, static, finite element models representing eight gait phases. The resulting stress migration through the full pelvic ring and pubic symphysis displacements were demonstrated under these conditions. In subsequent work, fixation improvements can be applied to these models to evaluate the change in internal stresses, joint displacements and deformations of the hardware, leading to a better quality of design and permitting ambulation during healing for the patient. [ABSTRACT FROM AUTHOR]