Modeling of the emission rates of methyl ethyl ketone and effects of additives on the emission rate

VOC(Volatile organic compound) emission rate was modelled in this study. The effects of the different environmental factors and the additives upon the emission rates were also determined. The study was conducted in a test chamber and in the field for determination of the emission rate of methyl ethyl ketone (MEK). Additionally, the theory of mass transfer was used to derive an MEK emission model with three variables (temperature, humidity, ventilation rate) and five coefficients (T1, R1, KB, ACHstd and Cstd); these were determined by the results of emission rate in a test chamber. The emission rate of MEK ranged from 16.1 × 103 to 101.0 × 103 mg/m2/hr/(g-MEK) for those cases which used solvents and plasticizer, and from 5.6×103 to 58.1×103 mg/m2/hr/(g-MEK) when PVC powder was added. Additionally, the MEK emission rates increased with an increase in temperature, humidity, and ventilation rate. The mass transfer coefficients of MEK determined from the VOC emission model were approximately 0.00246 m/sec for those cases which used solvents and plasticizer, and decreased by a factor of 0.67 to 0.00164 m/sec for those cases which used solvents, plasticizer and PVC powder.