Assessment of ablation damage on quartz ceramics through experiment and 3D modelling considering a dynamic heat source

The effects of irradiation time (IT), laser power (LP), and spot diameter (SD) on the damage caused to quartz ceramics under continuous-wave laser irradiation were investigated through an orthogonal experiment. The experimental results show that the LP has the dominant effect on the depth of an ablation pit, while the SD has the greatest impact on the diameter of the ablation centre. The diameter and depth of the ablation pit were both positively correlated to the irradiation energy. The bubbles and molten silica transition layer affected the laser beam's reflection and transmission properties, leading to the incident laser beam scattering into the entire ablation pit and forming an elliptical ablation pit. Furthermore, a 3D finite element (FE) model considering a dynamic heat source was developed to simulate the laser damage process. The shape and dimension of the ablation pit predicted by the FE model were consistent with those obtained through the experiment, demonstrating the effectiveness and rationality of the model. The FE analysis results show that the different ablation rates in the radial and depth directions significantly influence the morphology of the ablation pits. The temperature gradient in the transition region increases while the thickness of the transition region decreases as the LP increases. This indicates that a large LP will lead to greater thermal stress in this area and result in more microcracks.