Perspective of the application of ash from the ceramic industry in the development of alkali-activated roof tiles

The construction industry is always in need of new technologies and products that improve technological characteristics. Alkali-activated materials appear as an alternative to reduce energy costs, improve technological properties and still present themselves as materials with the potential for incorporating industrial waste. The objective of this research was the development of roof tiles through the process of alkaline activation using ash from the kilns of burning of a red ceramic industry. After the process of processing the materials and their characterizations, prismatic specimens (115 × 30 × 20 mm) were made with the replacement of 0, 6.25, 12.5, 25 and 50% ash by metakaolin and subsequently separated into two groups, (i) subjected to curing at room temperature and (ii) subjected to curing at a temperature of 80 °C, in both cases with a curing time of 7, 14 and 28 days. After each curing period and group, the specimens were subjected to technological evaluation of water absorption, porosity, flexural strength and scanning electron microscopy. The results obtained demonstrate that the use of ash from ceramic waste, mainly replacing 12.5% of the metakaolin, promotes a reduction in water absorption and porosity, and an increase in flexural strength. The results obtained at 28 days in thermal curing are 44.05 MPa for 12.5% ash, much higher than the reference composition (16.02 MPa). The increase in strength happens due to the formation of tobermorite, due to the calcium present in the ash, and due to the formation of phases rich in potassium from the ash, such as kalsilite. Thus, it is concluded that the use of ash from ceramic waste is possible in the alkaline activation of roof tiles due to the occurrence of additional mechanisms of alkaline activation.