Effect of milling time and presence of Sn on the microstructure and porosity of sintered Ti-10Ta-8Mo and Ti-10Ta-8Mo-3Sn alloys

The aim of the present study was to assess the influence of the milling time (10 h, 15 h and 20 h) on the structure and properties of Ti-10Ta-8Mo (wt.%) and Ti-10Ta-8Mo-3Sn (wt.%) alloys for potential biomedical application. In addition, the influence of the addition of 3 wt% Sn on the structure and properties of the milled and sintered materials was investigated. X-ray diffraction confirmed the partial synthesis and formation of the β phase during the milling process. The transmission electron microscope analysis of the bright and dark field images and the diffraction image proved the nanocrystalline nature of the material after being subjected to 20h milling duration. The scanning electron microscope observation of the sintered samples confirmed the influence of the milling time and presence of Sn on the microstructure of the obtained material. Furthermore, a small addition of Sn led to better size homogenization by establishing a better balance between the cold-welding and agglomeration processes. At the same time yielding different structures of pores for the sintered samples. The dry sliding tests revealed the excellent friction properties and wear rate of the samples previously milled for 15 h, with the addition of Sn.