H-mode-like transition and ELM-like bursts in LHD with thick ergodic layer

In H2 discharges of large helical device (LHD), H-mode-like transition has been obtained with edge localized mode (ELM)-like bursts in an outwardly shifted configuration of R ax = 4.00 m with an extremely thick ergodic layer, where the ι/2π = 1 position is located in the middle of the ergodic layer. This H-mode-like transition can be triggered by changing P NBI (13 cm−3. The spontaneous H-mode-like transition is also observed during a stable discharge with constant heating power and density, where a steep edge pressure gradient is formed at the ι/2π = 1 position. The ELM-like bursts occurred in the ergodic layer accompanied with density bursts. It is found that the density bursts triggered at the ι/2π = 1 position in the ergodic layer instantaneously propagate outward beyond the ergodic layer with positive density pulse, and a few ms later also begin to propagate inward from the ergodic layer with negative density pulse to recover the previous edge density profile. In the case of He discharges no H-mode-like transition and ELM-like bursts are observed. The frequency of the ELM-like bursts increases with heating power, e.g. 50 Hz (3 MW)–100 Hz (5 MW) at n e = 4 × 1013 cm−3. The external resonant magnetic field to generate a static m/n = 1/1 island inside the ergodic layer is supplied to the ELM-like bursts. It is also found that the externally supplied magnetic field makes a clear response even in the ergodic layer. As a result, the frequency of the ELM-like bursts decreases, e.g. from 60 to 45 Hz. The present study strongly indicates that those phenomena observed in LHD are quite different from the ones which have been observed in tokamaks until now.