Characterization of I c Degradation in Bent YBCO Tapes

In this paper, the I c degradation of bent YBCO tapes has been experimentally studied. The I c characteristics in length direction was measured through a non-contact, continuous I c measurement equipment (Mcorder), which is suitable for all kinds of high temperature superconducting (HTS) tapes. The detailed J c mapping of bent tapes was investigated by a Hall microscopy equipment (Mcorder 2-D), which scans the fields distribution on the surface of the films or bulks. A 4.1-m-long YBCO tape was wound on a 4.5-mm-diameter core with YBCO face outside or inside. The critical current of the YBCO tape before and after winding was measured lengthwise. And the 2-D J c map of the samples of degraded sections was measured. The result shows that the smallest safe bending diameter is larger than 14 mm and smaller than 4.5 mm, for YBCO face outside and inside, respectively, which indicates that the YBCO face is recommended to be inside in bending cases. The relation between critical current of YBCO face outside bent tapes and diameters was fitted to a sigmoid-like function, to help further development where YBCO face outside bending is unavoidable.