Velocity prediction in high-gradient channels

summary In 15 mountain stream reaches containing instream wood, we characterized velocity and flow resistance at bankfull through low flows. These data were: (1) used to assess the accuracy of previously published velocity prediction techniques for high-gradient channels; and (2) were combined with field data from other studies to develop general methodologies for predicting velocity and flow resistance in alluvial and mixed alluvial-bedrock channels both with and without step-forming instream wood. Velocity and flow resistance were poorly predicted by variables characterizing grain size and relative grain submergence. Conversely, methods based on detrended standard deviation of bed elevations (rz) and relative bedform submergence (h/rz) explained up to 84% of the variance in the measured flow resistance coefficients and 97% of the variance in dimensionless velocity. With an average velocity of 0.44 m/s for the collected measurements, velocity was predicted with RMS (root mean square) error as low as 0.071 m/s (16% of average) when discharge and bedform geometry is known and 0.10 m/s (23%) when only bedform geometry is known. Additionally, an empirical relationship indicates V=u � ¼ h=r z, supporting previouslypublished laboratory findings using a field-based dataset in complex high-gradient channels. Interactions between instream wood and clasts result in substantially enhanced step heights and flow resistance. This compound effect defies description by grain size and relative grain submergence. However, rz and h/rz quantify variability due to both clasts in combination with wood and clasts alone, providing relatively accurate predictions for the tested dataset and indicating substantial predictive capabilities in channels where bedforms are the primary source of flow resistance. Published by Elsevier B.V.