Study and Implementation of Charging Battery of the Car using Pumping System and Indicating the battery Percentage present in Fuel Car

This paper is to discuss about the design a fuel car battery charging system using a foot-pump, that charges the battery enough to start the vehicle. A conventional consumer model automobile has a battery capacity of 50Ah to 60Ah that generally lasts for several years. The starting current required for starter motor of such automobiles ranges from 200A to 500A, which is supplied by the battery and the starter circuit. In scenario of failure of the battery to provide sufficient charge, the above-mentioned device would be used. The project is focused elimination of automotive battery problems, which directly or indirectly revolves around the inability of the battery to produce enough charge to start the vehicle. The occurrence of such situations is generally high in regions with extreme temperature, since a battery failure can be caused by both high and low temperatures. The effectiveness as well as demand for such device will be significantly more in cold weathers (especially in areas with perpetual cold climate). The project also rules out the necessity of jump starting the vehicle with the help of another vehicle's battery. Since the uncertainty of availability of another vehicle for jump starting is one of the major causes of being stranded, the device will prove to be of much help in such cases.