High performance of catalytic sheet filters of V2O5-WO3/TiO2 for NOx reduction

Nitrogen oxide (NOx) emissions in fuel from the stationary as well as from mobile sources primarily from power stations, industrial heaters, cogeneration plants, and diesel engines represent a major worldwide environmental problem. The selective catalytic reduction (SCR) of NOx with NH3 over catalyst based on V2O5-WO3/TiO2 (VWT) is the most effective benchmark technique to efficiently reduce NOx emissions from stationary and mobile sources. Among the different transition metals (Mn, Nb, Co, Cr, Cu, Ce) used in current research work, the manganese could make up the loss of SCR activity caused by the decrease of V2O5 loading (50%) in prepared VWT powder catalyst. The optimal loading of Mn is 3 wt% in case of 3V9WT powder catalyst, which shows the best catalytic performance. 3Mn3V9WT powder catalyst exhibits enhanced NO conversion performance, i.e., ~ 95-98% with NH3 leakage 94% for the temperature of 300-320 °C. The recovery of SCR activity of the 3Mn3V9WT catalyst after SO2 effect was good, i.e., ~ 94% at 320 °C for long interval of time, where NH3 leakage was < 5 ppm.