Superconductor Standard Cell Library for Advanced EDA Design

Cell library is the keystone component that enables adoption of advanced electronic design automation (EDA) tools, such as logic synthesis and automatic place-and-route. The EDA tools are essential for scaling circuit complexity by orders of magnitude. We have designed a dual RSFQ/ERSFQ cell library for the MIT-LL SFQ5ee process, that can be used with the superconductor EDA tools suite that is being developed. In addition to satisfying the margins criterion, the performance of each cell has been optimized for Monte-Carlo statistical variations across multiple process corners including minimizing the spread of timing distributions. To enable a digital design flow using HDL simulations with timing back-annotation Liberty files have been developed for multiple process corners, using the load-dependent timing char-acterization. The cells have been designed for a standard height of 40 μm with a grid size of 20 μm. The library provides dedicated tracks for signal and power routing. Multiple independent biases are supported for RSFQ designs. The cells can be interconnected either by abutting or using passive transmission lines. Dedicated moat slots have been provided which are uniformly distributed across the cell. All cells are re-optimized post-layout. The library currently contains 22 unique types of cells. Initial validation of the cell library was performed by designing RSFQ and ERSFQ shift registers for the MIT-LL SFQ5ee fabrication process, which yielded wide operating margins. In addition, we present measurement results for a chip designed and fabricated to characterize several library cells using a multiplexing scheme.