Isolation Valve Contingencies Using Wireline Stroker and Tractor Technologies

With today's high rig operating costs, identifying areas where new technology can be used to improve efficiency and reduce rig-time is critical to many a project's financial success. In deep water regions, new intervention solutions that are not rig dependent are especially desirable. Electric wireline deployed interventions have been shown to offer both technical and financial benefits in mechanical manipulation of downhole hardware, such as isolation valves, in that they are faster to mobilize and execute, saving the operator several days in rig-time and deferred production compared to pipe conveyed methods. Many deep water completions use down hole isolation valves for temporarily closing off production while awaiting flowline connections for first oil. These isolation valves can be shifted open or closed through surface commands while a backup (contingency) allows the valves to be mechanically shifted. Failure of these valves can result in expensive delays to production with large rig time costs to intervene. Operators in the Gulf of Mexico, West of Shetland and West Africa have been pioneers in the application of wireline conveyed mechanical solutions for isolation valve contingencies. The contingency consists of an electric wireline hydraulic stroking tool to shift the sleeve open or closed. The wireline stroker is either wireline tractor conveyed in high angles or run with only the shifting tool attached in low angles. A new intelligent shifting tool is also available for opening and closing valves on command to avoid hang ups on downhole profiles that may occur with the conventional spring-loaded shifting tools.