The influence of growth techniques on the structure of epitaxial ErSi1.7 on Si(111)

The very low lattice mismatch between the ErSi1.7(0001) and Si(111) allows a convenient epitaxial growth of the former on silicon substrates. However, the morphology of the films formed is found to depend greatly on the epitaxy techniques used. We have thus undertaken a study of the different possible techniques (single metal deposition, alternate evaporation and co-evaporation) so as to determine the procedure which gives silicide thin films of good quality. Best results are obtained by co-evaporation: the films are free of pinholes and present a flat surface. The formation of the silicide films was followed in-situ by LEED and XPS. The ErSi1.7 silicide is characterized by a sharp ( 3 × 3 )R30° LEED pattern which always appears after annealing at temperatures ⩾ 650°C whatever deposition technique is used. The Si KLL spectra, on the other hand, are found very appropriate to detect the presence of holes. The texture of the films was studied ex-situ by SEM. Glancing incidence X-ray diffraction and SIMS have also been used to get insights into the crystalline parameters and the in-depth composition of the silicide layers. The lattice of the epitaxial film is laterally extended to adapt to the Si(111) lattice and compressed axially. No evidence of ordered Si vacancies in the silicide volume is detected. The Er : Si ratio is the same throughout the film. The formation of ErSi1.7 is discussed in relation to the nucleation controlled reaction and the atomic structure of the compound.