Back to Search
Start Over
Quantification of Phase Behavior for Solvent/Heavy-Oil/Water Systems at High Pressures and Elevated Temperatures with Dynamic Volume Analysis
- Source :
- SPE Journal. 25:2915-2931
- Publication Year :
- 2020
- Publisher :
- Society of Petroleum Engineers (SPE), 2020.
-
Abstract
- SummaryAccurate quantification of phase behavior of solvent/heavy-oil/bitumen/water systems at high pressures and elevated temperatures is of high significance for the design of vapor extraction, cyclic solvent injection, expanding-solvent steam-assisted gravity drainage (ES-SAGD), and hot-solvent injection processes. The relevant experimental data and theoretical analyses are still insufficient for achieving a reliable model. This is especially true when the system temperatures approach or exceed the critical temperatures of the solvents used (i.e., when the solvent density is large enough).This study provides new experimental measurements of the phase behavior of propane (C3H8)/carbon dioxide (CO2)/heavy-oil/water systems at pressures up to 20 MPa and temperatures up to 432.3 K. More specifically, four feeds of C3H8/CO2/heavy-oil/water systems are used to conduct constant composition expansion (CCE) tests, during which the heights of the entire fluid system (i.e., total volume) and each phase are recorded at each pressure and temperature, respectively. Theoretically, a dynamic volume analysis (DVA) of the measured data is proposed for the first time to quantify each phase, provided that the assumption for vapor phase is valid and that the vapor and oleic phase densities can be accurately calculated. By tuning the binary interaction parameter (BIP) for solvent/heavy-oil pairs (denoted as BIPS−HO) to match the total volume, the height of the vapor/oleic (V/L) interface can be matched as well. By using the tuned BIPS−HO, the total volume and height of the V/L interface of C3H8/CO2/heavy-oil/water systems can be accurately predicted, no matter whether the solvent solubility in water is low (i.e., C3H8) or high (i.e., CO2). This DVA can be used to determine/evaluate the solvent solubility, saturation pressure/phase boundary, and phase volume/density accurately in a large temperature and pressure range. The newly proposed DVA method is also used to reproduce the experimental measurements collected from the literature, including phase-volume fractions, solvent solubility, and saturation pressure. In addition, the DVA method can serve as a tool to check whether the experimental measurements are reliable or not.
- Subjects :
- Materials science
Analytical chemistry
Energy Engineering and Power Technology
Volume analysis
02 engineering and technology
010502 geochemistry & geophysics
Geotechnical Engineering and Engineering Geology
01 natural sciences
Solvent
020401 chemical engineering
Phase (matter)
Oil water
0204 chemical engineering
0105 earth and related environmental sciences
Subjects
Details
- ISSN :
- 19300220 and 1086055X
- Volume :
- 25
- Database :
- OpenAIRE
- Journal :
- SPE Journal
- Accession number :
- edsair.doi...........f7d71bca25844e6f9efc9fcde9781ee2
- Full Text :
- https://doi.org/10.2118/201240-pa