Back to Search Start Over

Carrier suppression system to measure phase noise of acoustic resonators with low motional resistance

Authors :
Fabrice Sthal
E. Vaillant
J. Imbaud
A. Pokharel
J.J. Boy
Francois-Xavier Esnault
Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) (FEMTO-ST)
Université de Technologie de Belfort-Montbeliard (UTBM)-Ecole Nationale Supérieure de Mécanique et des Microtechniques (ENSMM)-Université de Franche-Comté (UFC)
Université Bourgogne Franche-Comté [COMUE] (UBFC)-Université Bourgogne Franche-Comté [COMUE] (UBFC)-Centre National de la Recherche Scientifique (CNRS)
Centre National d'Études Spatiales [Toulouse] (CNES)
Femto-st, Temps-fréquence
Source :
Review of Scientific Instruments, Review of Scientific Instruments, 2020, 91 (8), pp.085104 (8)
Publication Year :
2020
Publisher :
HAL CCSD, 2020.

Abstract

International audience; A carrier suppression system is implemented in order to measure the phase noise of acoustic resonators that have a low motional resistance. A special adapters’ system using transformers is proposed to improve the loaded quality factor of the resonators. With this developed device and described protocol, the inherent noise of resonators can be obtained without the usual electronical oscillator conditioning that could take part in the results. The loaded quality factor is improved from about 10% to 60% of the intrinsic quality factor. As an example, the system is used to study Langatate crystal resonators vibrating at 10 MHz. Langatate crystals can be an alternative to substitute for the quartz crystal resonators for frequency and time applications. Their coupling coefficient and the product quality factor-frequency are normally higher than those in quartz crystal resonators. For ultrastable resonators, the motional resistance obtained with Langatate crystals is about five times lower than that for the quartz crystal; it can reach typically few ohms. These resonators have been characterized in terms of impedance, Q-factors, turnover temperature, amplitude–frequency effect, and phase noise. The short-term stability of these resonators is given in terms of Allan standard deviation. The influence of the driving power is presented

Details

Language :
English
Database :
OpenAIRE
Journal :
Review of Scientific Instruments, Review of Scientific Instruments, 2020, 91 (8), pp.085104 (8)
Accession number :
edsair.doi.dedup.....8e18e72b6c227e2138a29ded8c4282fa