Back to Search
Start Over
Assessing the uniaxial compressive strength of extremely hard cryptocrystalline flint
- Publication Year :
- 2019
- Publisher :
- Elsevier, 2019.
-
Abstract
- Cryptocrystalline flint is an extremely hard siliceous rock that is found in chalk formations. The chalk is frequently a prefered rock type, which in recent decades is often used as a host for underground rock caverns and tunnels in Europe and North America. A reliable estimation of the uniaxial compressive strength (UCS) of the extremely strong flint, with an average UCS of about 600 MPa will provide guidance for a proper engineering design, where flint is encountered, thereby avoiding project progress delay, litigation as well as economic consequences. Conventional UCS measurement using core samples is cumbersome for flint due to the extreme strength and hardness of the rock, for which the core sample preparation process is often extremely difficult. In this study, the UCS prediction models of flints collected from the North-West Europe were developed and the validity of the developed models was investigated. A series of laboratory index tests (comprising the three-point-bending, point load, ultrasonic velocity, density, Shore hardness and Cerchar Abrasivity tests) were perfomed. The index test results were correlated with the UCS values previously determined in the laboratory using both cylindrical and cuboidal specimens to develop the UCS prediction models. Regression analysis of the UCS and the index test results was then performed to evaluate for any potential correlations that can be applied to estimate the UCS of the cryptocrystalline flint. Intensive validity and comparison studies were performed to assess the performance of the proposed UCS prediction models. This study showed that UCS of the tested flint is linearly correlated with its point load strength index, tensile strength and compressional velocity, and is parabolically correlated with its density. The present study also demonstrated that only a couple of the previously developed empirical UCS models for estimating UCS are suitable for flint, which should be used with care. Accepted version
- Subjects :
- Technology
TBM tunneling
GRANITIC-ROCKS
Extremely hard
Cryptocrystalline
0211 other engineering and technologies
Modulus
Core sample
Drilling
02 engineering and technology
0905 Civil Engineering
ENGINEERING PROPERTIES
ELASTIC PROPERTIES
Engineering
CERCHAR ABRASIVITY INDEX
Ultrasonic velocity
Ultimate tensile strength
P-WAVE VELOCITY
Geotechnical engineering
Uniaxial Compressive Strength
Engineering, Geological
PRESERVATION
Mining & Metallurgy
Mining & Mineral Processing
Flint
Economic consequences
021101 geological & geomatics engineering
021102 mining & metallurgy
Science & Technology
POINT LOAD STRENGTH
Civil engineering [Engineering]
POROSITY
MODULUS
0914 Resources Engineering and Extractive Metallurgy
Geotechnical Engineering and Engineering Geology
TENSILE
Compressive strength
Physical Sciences
Empirical estimation
Uniaxial compressive strength
Geology
Subjects
Details
- Language :
- English
- ISSN :
- 13651609
- Database :
- OpenAIRE
- Accession number :
- edsair.doi.dedup.....964e26e3934823af10783ef7cef11016