Residence Time Distribution Analysis of Drip-Irrigated Beds—The Effect of Material and Fluid Properties with Implications for Heap Leaching Practice

The quantitative effect of particle shape, porosity, wettability, particle size, and solution viscosity on the residence time distribution (RTD) profiles of non-reactive, steady-state, drip-irrigated ore beds characteristic of heap leaching systems is presented. Results were obtained using step-up tracer tests and allowed for the analysis of preferential flow behaviour within the systems. The key findings were as follows. Increased particle sphericity enhanced channelling in beds of smaller particles, but not for larger particle sizes. Higher particle wettability caused greater liquid dispersion during both initial wetting studies and at steady-state fluid flux. Higher porosity levels and the inclusion of fines in mixed sized beds resulted in longer average solute residence times, higher liquid hold-up, longer solution and tracer breakthrough times, and increases in drain-down moisture percentages. Increasing the irrigation fluid’s viscosity, reflective of the increase in ionic concentrations in leach solutions, reduced both the solution and tracer breakthrough times and increased dispersion with signs of more discontinuous or isolated fluid volumes at steady-state. These results highlighted the importance of the inclusion of fines in agglomerated beds to improve uniform wetting especially those with low to moderate particle porosities (