Impact of bacterial cellulose on the physical properties and printing quality of fine papers

Bacterial nanocellulose (BNC), due to its inherent nanometric scale and strength properties, can be considered as a good candidate to be used in papermaking. This work explored the possibility of using it in the production of fine paper as a wet-end component and for the paper coating. Filler-containing handsheet production was performed with and without the presence of common additives typically used in the furnish of office papers. It was found that, under optimized conditions, BNC mechanically treated by high-pressure homogenization could improve all the evaluated paper properties (mechanical, optical and structural) without impairing the filler retention. However, paper strength was improved only to a small extent (increase in the tensile index of 8% for a filler content of ca. 27.5%). On the other hand, when used at the paper surface, remarkable improvements in the gamut area of >25% in comparison to the base paper and of >40% in comparison to only-starch coated papers were achieved for a formulation having 50% BNC and 50% of carboxymethylcellulose. Overall, the present results highlight the possibility of using BNC as a paper component, particularly when applied at the paper substrate as a coating agent aiming at improving printing quality.
Fundacão para a Ciência e a Tecnologia (FCT), Portugal is acknowledged by SFRH/BDE/108095/2015 grant and Strategic Research Centre Project (UIDB/00102/2020). This work was also carried out under the Project Inpactus - innovative products and technologies from eucalyptus, Project N.º 21874 funded by Portugal 2020 through European Regional Development Fund (ERDF) in the frame of COMPETE 2020 nº246/AXIS II/2017
info:eu-repo/semantics/publishedVersion