Biomechanical comparison of distal femoral fracture fixation: Analysis of non-locked, locked, and far-cortical locked constructs

To assess whether far-cortical locking (FCL) screws alter the fracture site strain environment and allow shorter bridge plate constructs for supracondylar femoral fractures, we tested the fracture site displacement under force of synthetic left femora with a 5-cm metaphyseal fracture gap, modeling comminution. Five models of nine constructs were tested (three types of diaphyseal screws [nonlocking, locking, and FCL] and two plate lengths [13 holes and 5 holes]). Long plate models using three or four diaphyseal screws (working length 13.5 or 7.5 cm, respectively) were compared with short plates with three diaphyseal screws (working length 7.5 cm). Models were loaded axially and torsionally; 100 cycles in random order. Primary outcome measures were axial and torsional fracture site stiffness. FCL screws decreased rotational stiffness 19% (P < .01) compared with baseline nonlocking screws in the same plate and working length construct, mirroring the effect (20% decrease in stiffness, P < .01) of nearly doubling the nonlocking construct working length (7.5-13.5 cm). Similarly, FCL screws decreased axial stiffness 23% (P < .01) in the same baseline comparison. Fracture site displacement under loading comparable to a long working length nonlocked plate construct was achieved using a shorter FCL plate construct. By closely replicating the biomechanical properties of a long plate construct, a fracture site strain environment considered favorable in promoting fracture healing might still be achievable using a shorter plate length. Clinical Significance: It might be possible to optimize fracture site strain environment and displacement under loading using shorter FCL plate constructs. Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 00:00-00, 2020.