Determination of temperature dependent static Young's modulus of refractory ceramics using RUL tests

Abstract Refractory linings are, in addition to loads due to corrosion and creep processes, particularly affected by thermomechanical stresses caused by the restricted thermal expansion of the lining. These stresses can occur within individual components as well as in bricks and can lead to plastic deformation, cracks, and material failure. Thus, comprehensive knowledge about thermomechanical behavior is mandatory for an accurate prediction of occurring stresses to design load‐optimized linings. This paper presents a method for utilizing refractoriness under load (RUL) tests to determine a temperature dependent static Young's modulus for refractories. In a first step, RUL tests with a negligible load are carried out in order to determine the materials temperature dependent thermal expansion coefficient. Afterwards, several RUL tests with higher loads are carried out. The measured data of change in temperature and length are then corrected by the thermal expansion and used to construct elastic lines for several temperatures, where the elastic slope is determined using the change in length and the respective load. Thus, Young's modulus for several temperatures can be determined. The obtained values for the Young's modulus are then compared to resonant frequency damping analysis measurements and validated using a finite element (FE) model of the RUL test.