Study on Safety Mining Technology of Gob in Stopping Face by Replacing Pressure Equalization with Gob Pumping—A Case Study of Sitai Mine

Gas control in the upper corner of the natural coal mining face with high gas is always a difficult problem that troubles the safe production of the working face. Among them, a high gas-prone natural coal mining face with ground air leakage is more likely to cause gas and CO to exceed limits in the corner of the working surface and is difficult to control. The traditional treatment methods often have some problems; for example, it is easy to increase air leakage in the gob with the method of gas extraction in the gob, which is not conducive to the prevention and control of spontaneous combustion of coal in the gob. At present, the more effective method is the pressure-equalization method. However, the pressure-equalization measures need to establish a complex pressure-equalization system, and close cooperation between the systems is required; once the system power fails or equipment failure occurs, the pressure-equalization state changes randomly, and it is easy to cause gas over-limits and other faults. Therefore, this paper presents a new method to control gas in the gob of a coal seam by pumping the gob of the upper-adjacent layer, using the negative pressure of pumping, and balancing the negative pressure of the upper-adjacent layer and the gob of the coal seam to form a new pressure-equalization relationship. This method can prevent the toxic and harmful gases in the goaf of the upper-adjacent layer from escaping into the passageway of the gob of the local coal seam, reduce the air leakage in the goaf, and benefit the gas control and spontaneous coal combustion prevention in the goaf.