Proposal of a Creep-Experiment Method and Superficial Creep Coefficient Model of CFT Considering a Stress-Redistribution Effect

Abstract Existing concrete creep coefficient prediction models have the limitation of not considering the structural characteristics of CFT. For this reason, these models tend to overestimate the creep deformation of CFT. Therefore, in order to overcome the limitations of existing CFT creep experiments, this study proposes a creep-experiment method involving the use of CFT that passively changes the load applied to a single concrete specimen by calculating the stress redistribution between the concrete and a steel tube in CFT based on a step-by-step method. Furthermore, by actually applying the proposed experimental method, a creep experiment of CFT lasting for approximately 163 days was performed and a superficial creep coefficient model of CFT was proposed based on long-term strain data from the experiment. In order to verify the proposed superficial creep coefficient model, it was compared with two design criteria (CEB-FIP and ACI) based on the experimental results of this study and references. As a result, compared to the existing design criteria, the value predicted by the proposed superficial creep coefficient model showed good agreement with the experimental results of this study and the references, proving that the proposed creep-experiment method of CFT and superficial creep coefficient model are reasonable.