Effect of sintering temperature on magnetoelectric properties of PbTiO3/NiFe2O4 composite ceramics

Magnetoelectric composites have attracted much attention due to their strong magnetoelectric coupling effect. In this paper, PbTiO3-NiFe2O4 (PTO/NFO) composite ceramics were prepared by sol-gel method. Effect of sintering temperatures on the structure, dielectric properties and multiferroic properties were studied. XRD results show that PTO/NFO ceramics have been successfully prepared. When the sintering temperature is 1050 °C, the secondary phase PbO2 exists in the ceramics. SEM results show that there were two kinds of grains with different sizes. EDS analysis suggested that the large particles are NFO and the small particles are PTO. The sintering temperature has a great influence on the dielectric and ferroelectric properties of the prepared ceramics. When the sintering temperature is 950 °C, the ceramics show the maximum dielectric constant at low frequency. When the sintering temperature is 1150 °C, the maximum residual polarization is 1.236 μC/cm2. The conductive mechanism of ceramics is dominated by Space Charge – Limited Conduction. The remanent magnetization and coercive field decrease with increasing the sintering temperature. The magnetoelectric coupling coefficient shows that ceramics have strong magnetoelectric coupling performance (5.7 V/cm·Oe).