Impact of the Ferroelectric Stack Lamination in Si Doped Hafnium Oxide (HSO) and Hafnium Zirconium Oxide (HZO) Based FeFETs: Toward High-Density Multi-Level Cell and Synaptic Storage

A multi-level cell (MLC) operation as a 1–3 bit/cell of the FeFET emerging memory is reported by utilizing optimized Si doped hafnium oxide (HSO) and hafnium zirconium oxide (HZO) based on ferroelectric laminates. An alumina interlayer was used to achieve the thickness independent of the HSO and HZO-based stack with optimal ferroelectric properties. Various split thicknesses of the HSO and HZO were explored with lamination to increase the FeFET maximum memory window (MW) for a practical MLC operation. A higher MW occurred as the ferroelectric stack thickness increased with lamination. The maximum MW (3.5 V) was obtained for the HZO-based laminate; the FeFETs demonstrated a switching speed (300 ns), 10 years MLC retention, and 104 MLC endurance. The transition from instant switching to increased MLC levels was realized by ferroelectric lamination. This indicated an increased film granularity and a reduced variability through the interruption of ferroelectric columnar grains. The 2–3 bit/cell MLC levels and maximum MW were studied in terms of the size-dependent variability to indicate the impact of the ferroelectric area scaling. The impact of an alumina interlayer on the ferroelectric phase is outlined for HSO in comparison to the HZO material. For the same ferroelectric stack thickness with lamination, a lower maximum MW, and a pronounced wakeup effect was observed in HSO laminate compared to the HZO laminate. Both wakeup effect and charge trapping were studied in the context of an MLC operation. The merits of ferroelectric stack lamination are considered for an optimal FeFET-based synaptic device operation. The impact of the pulsing scheme was studied to modulate the FeFET current to mimic the synaptic weight update in long-term synaptic potentiation/depression.