Spring-like Triboelectric Nanogenerator for Monitoring Body Vibration State of the Ship Power Equipment

In the navigation process, monitoring the running state of ship power plant equipment is crucial. In bad weather, when the critical equipment is abnormal, it is especially necessary to find out the root cause of the failure as soon as possible. In this case, it is required to use rapid detection equipment to detect and judge the key parameters. This paper proposes a vibration sensor (VS-TENG) of triboelectric nanogenerators based on spring vibration. The sensor adopts the spring structure inside and vibrates with the ship power equipment to collect the low-frequency vibration energy. This paper uses the VS-TENG sensors of two different spring parameters to study the electrical signal output under the excitation conditions of varying vibration frequencies. The results show that in the frequency range of 3–500 Hz, the efficient processing of different vibration excitation frequency signals can be realized, and the vibration frequency can be accurately identified. The error of medium-high frequency identification in VS-TENG is less than 1%. Especially at the resonant frequency, the maximum voltage output value can be achieved. On the PT500 Mini test bench, VS-TENG can reasonably identify the motor frequency and shutdown state. Therefore, VS-TENG can be applied to the condition monitoring of the vibration of the ship’s power plant and has a broad application prospect.