Flushing newly built residential buildings with outdoor air for reducing formaldehyde and VOCs concentrations

New building construction is often counted as a source of indoor air pollution because of formaldehyde and volatile organic compounds (VOCs) emitted from new building materials, such as furnishings, wood, and finishings. The high levels of formaldehyde and VOCs in the early stage of new buildings could be linked to the negative health effects on occupants. The aim of this study is to examine the impacts of flush-out air flow rate and flush period in reducing formaldehyde and VOCs produced by building materials or furnishing of newly built residential buildings. Field measurements were conducted from September 2016 to August 2018 in nineteen newly built apartments to verify the effectiveness of the flush-out procedure. The field measurements showed that after the flush-out, the indoor concentrations of formaldehyde and VOCs in the newly built samples significantly decreased. The indoor concentrations of formaldehyde and TVOCs were reduced to about 61% and 41% of the initial concentration when the samples were flushed at 0.7ACH for nine days. The results of this study showed that the flush-out for a short term of below two weeks was more effective reducing the emission potential of VOCs than of formaldehyde. When the samples were flushed for more than seven days, the air change rates of the flushing did not significantly influence the reduction of indoor pollutants.