An ADCP Attitude Dynamic Errors Correction Method Based on Angular Velocity Tensor and Radius Vector Estimation

An acoustic Doppler current profiler (ADCP) installed on a platform produces rotational tangential velocity as a result of variations in the platform’s attitude, with both the tangential velocity and radial orientation varying between each pulse’s transmission and reception by the transducer. These factors introduce errors into the measurements of vessel velocity and flow velocity. In this study, we address the errors induced by dynamic factors related to variations in attitude and propose an ADCP attitude dynamic error correction method based on angular velocity tensor and radius vector estimation. This method utilizes a low-sampling-rate inclinometer and compass data and estimates the angular velocity tensor based on a physical model of vessel motion combined with nonlinear least-squares estimation. The angular velocity tensor is then used to estimate the transducers’ radius vectors. Finally, the radius vectors are employed to correct the instantaneous tangential velocity within the measured velocities of the vessel and flow. To verify the effectiveness of the proposed method, field tests were conducted in a water pool. The results demonstrate that the proposed method surpasses the attitude static correction approach. In comparison with the ASC method, the average relative error in vessel velocity during free-swaying movement decreased by 20.94%, while the relative standard deviation of the error was reduced by 17.38%.