Study on low-heat synergistic chemical profile control and flooding technology in Bohai Oilfield

Introduction: Through the combination of hot water and chemical agent, the low-heat synergistic chemical profile control and flooding technology can not only reduce the risks of sand production and string damage caused by high-temperature thermal recovery technology, but also further improve the recovery factor on the basis of hot water flooding.Methods: Based on laboratory testing, the synergism mechanism of thermal energy and chemical agent is studied.Results: The research results showed that in the near wellbore zone of the injection well, crude oil viscosity reduction mainly relies on thermal energy, and chemical agents assist in improving the water oil mobility ratio and reducing the risk of cross flow. After entering the deep formation, due to the decrease in temperature, the thermal energy effect is weakened, but the chemical agents still aggregate at the oil-water interface and continue to act on heavy oil to reduce viscosity. The higher the temperature, the greater the role of heat energy, and the weaker the role of chemical agents. The higher the injection concentration of chemical agent, the more obvious the leading role of chemistry. Based on the comprehensive evaluation index, the optimized temperature is 80°C and the injection concentration is 1500 mg/L. The scheme study of Bohai L Oilfield shows that compared with cold water flooding, hot water flooding can only improve oil recovery by 1.2 percentage points, and low heat collaborative chemical profile control flooding technology can further improve oil recovery by 4.7 percentage points on the basis of hot water flooding, with obvious oil increase effect.Conclusion: It is suggested that Bohai L Oilfield should apply low-heat coordinated chemical profile control and flooding technology to improve the development effect of the oilfield, and provide new technical ideas for safe and economic development of offshore heavy oil.