Simulation Study of Breakage in Coral Sand Particles under Dynamic Confined Compression

This paper reports a simulation-based dynamic confined compression analysis of coral sand under an impact load using the discrete element method (DEM). The evolution of particle breakage on the mesoscale was studied by investigating force chain distributions, crack development, and breakage modes. Crushable sand particles were simulated by replacing rigid particles with flexible basic unit aggregates. The Weibull parameters were incorporated within the mesoscopic parameters of particles, and random numbers were introduced. The obtained results for particle strengths were consistent with the experimental data. The numerical results demonstrated that the force chain was significantly strengthened along the loading axis during loading and weakened during unloading. The cracks were primarily generated along the strong force chain, and particle breakage caused the strong force chain to move towards relatively more complete fragments nearby. The crack was primarily oriented along the loading axis, and its anisotropy was observed to decrease with an increase in the load. Before yielding, particle breakage in the specimen was dominated by attrition at the edges and corners. After yielding, the crack extended into the particle perpendicular to the intergranular contact surface and was deflected by the simultaneous influence of pores. The fracture and shattering of particles occurred successively, and the consequent fall-off and slip filling of the fragments promoted the deformation development.