Finite element modeling

In holography and speckle interferometry the measurement range is generally limited by the greatest number of fringes that can be resolved in a single image. As a result these techniques have been generally confined to small displacement measurement applications. In the case of out-of-plane measurements one can overcome this limitation by simply adding incremental measurements at individual detector pixels. In the case of in-plane measurements, however, summing incremental measurements is not a straightforward procedure since the interference pattern moves laterally across the detector as the material deforms. We describe a modeling technique based on finite elements which solves this problem. In combination with a full field method such as holography or speckle interferometry, it provides a very sensitive measurement technique with dense spatial sampling and large dynamic range. Experimental results of speckle interferometry operating in transmission to measure in-plane displacements of biological membranes are presented, where total material displacements are of the order of millimeters. The results also demonstrate how the finite strain tensor is calculated analytically from the data at any point on the material. Key words: Speckle, interferometry, finite elements, membranes.