Viscosity decrease by interfacial slippage between immiscible polymers

The rheological behavior under pressure-driven shear flow was studied using binary blends with a sea-island structure. The addition of a low-viscosity dispersion having a high interfacial tension with the continuous phase greatly reduces the shear viscosity, for example, the addition of atactic polystyrene (PS) with a low viscosity to isotactic polypropylene (PP) and the addition of PP with a low viscosity to PS. The interfacial slippage occurs because of the poor adhesive strength with the enlarged interfacial area and is responsible for the viscosity decrease. When the dispersion has a similar viscosity to the continuous phase, the viscosity decrease is barely detected. This is because the deformation of dispersed droplets is restricted, which creates a small interfacial area. The interfacial tension between the continuous and dispersed phases plays a crucial role on the shear viscosity. In the case of PP, the addition of linear low-density polyethylene with a relatively low interfacial tension to PP has almost no impact on the shear viscosity. This is despite the polyethylene having a low viscosity. KEYWORDS Interface, polymer blend, shear viscosity
1 I INTRODUCTION Interfacial slippage between immiscible polymer pairs during multilayered film extrusion is widely recognized from the pioneering works performed by Macosko et al. [1-5] The phenomenon was also [...]