The effect of veneer-modifcation on the bond-strength in laminated veneer products

A major problem in the manufacture of three-dimensional laminated veneer products (LVP) is damage due to stretching and/or buckling of the veneer. To reduce or eliminate this problem, veneer densification or adding a strengthening layer to the veneer can be an alternative. To study how veneer modification influences the veneer-to-adhesive bond strength, three methods of modification were studied in relation to an unmodified reference veneer: (1) densified veneer, (2) veneer pre-bonded with paper and hot melt adhesive (HMA), (3) veneer pre-bonded with non-woven polypropylene (NW) fabric glued to the veneer (a) with a urea formaldehyde (UF) adhesive, (b) with a mixture of UF and polyvinyl acetate (PVAc) adhesive, and (c) with a PVAc adhesive. Densification, pre-bonding with paper, and NW with UF/PVAc adhesive mixture resulted in no or only a slight decrease in strength of the bond-line compared to the reference. NW glued with UF or PVAc adhesive showed a considerable reduction in the strength of the bond-line. The climatic cycling had no significant influence on the bond strength.
Validerad; 2016; Nivå 1; 20151223 (dicsan)