Search

The mechanical and dielectric properties of transformer insulating paper are key factors that require close attention to ensure optimal operation. In this study, a novel approach of enhancing properties by nanocellulose modification was proposed. To investigate the effect of doping, insulating paper with different doping mass fractions of cellulose nanocrystals (CNCs) was prepared, and multiple properties of the sample were characterized. By applying a doping concentration gradient, the non-monotonic trend in performance with doping levels was revealed, and the impact of doping concentration on the data variability was investigated. The effects of CNC doping on the surface pore size of the samples were analyzed by SEM (scanning electron microscopy) and a mercury intrusion method, and the regularity of CNC dispersion uniformity with doping concentration was investigated. The Brunauer, Emmett, and Teller model was employed to fit the water vapor adsorption isotherm data, providing an analysis of the impact of doping on hydrogen bond connections and the moisture adsorption properties. Tensile strength and Young's modulus were measured and analyzed using the Page model and the Halpin–Kardos model. The tensile strength of the 6 wt. % CNC-modified paper was increased by 6.91%. 10 wt. % CNC-modified paper had a Young's modulus increase of 11.98%. 3 wt. % CNC-modified paper has a 28.53% increase in the AC breakdown field strength and an 8.72% increase in the DC breakdown field strength. The influence of CNC on the dielectric properties of the insulating paper was discussed using the Havriliak–Negami (H–N) model. The results indicate that the introduction of CNC can effectively enhance the comprehensive performance of oil-immersed insulating paper. [ABSTRACT FROM AUTHOR]

For a hygiene paper such as tissue and towel, strength, softness, and absorbency are known as attributes that a user is looking for. It is proposed here that purchasing decisions are likely to be influenced by in-use experiences, which may be quite different from the physical properties measured with current standardized tests. There have been continuous efforts on developing physical test methods to replace subjective in-use tests because the benefits of the former are too significant to be overlooked. This paper considered some in-use test methods for paper towel products that can be carried out by panel members quickly in the course of sensory panel testing. In addition, laboratory tests were developed in an attempt to quantify such input. The sensory panel testing showed that (wet) strength and absorbency were the key contributions to the performance of paper towels. Softness did not show any significant contribution to it. Wet strength showed a high correlation with absorbency. The (wet) ball burst strength had the highest correlation with the in-use strength. Although both the tensile strength and the ball burst strength had a high correlation with preference, the ball burst tester is preferred because more reproducible and simpler to operate. [ABSTRACT FROM AUTHOR]

The production of pulp and paper from recycled paper generates significant quantities of deinking paper sludge (DPS). This sludge contains a significant amount of organic matter (36%) as well as heavy metals such as Pb, Zn, and Cr. In this work, the incorporation of DPS (0%, 8%, 10%, and 12%) in the manufacture of clay bricks leads to valorization of this waste by showing that two of its contents considered problematic (organic matter and heavy metals) have several positive effects. It was found that the organic parts were transformed into pores after brick firing (850°C), which improved thermal insulation while keeping mechanical resistance in conformity with usual standards. For the heavy metals, which make DPS a hazardous waste, a leaching test was employed. The results show that these metals were trapped in the ceramic matrix after the firing of bricks at a high temperature, resulting in a final product that was not dangerous. Other tests were carried out on bricks with DPS to evaluate density, water absorption, shrinkage, loss on ignition, porosity, and microstructure in order to characterize this new product. It was concluded that DPS can be used in clay bricks as an asset for the formation of pores to enhance thermal insulation. The addition of DPS can be optimized at 10% to comply with the standard and not exceed the required values for shrinkage, water absorption, and loss on ignition. [ABSTRACT FROM AUTHOR]

As is well known, Laser print paper is usually produced with high‐quality chemical wood pulp. The laser print waste paper fiber (LPWF) is a high‐quality secondary fiber, and the research and development of high‐value utilization technology for laser print waste paper has attracted much attention in the field of renewable resource recycling. In this study, LPWF was used to reinforce poly(lactic acid) (PLA) composites in the field, and the composites were modified with bioenzyme, cationic polyacrylamide (CPAM), and nano‐silicon carbide (Nano‐SiC) to enhance the interfacial compatibility of LPWF/PLA composites. The study systematically investigated the effects of various modification methods on the characteristics and degradability of composites made from laser print waste paper fiber reinforced PLA resin matrix. The results showed that the mechanical properties of the composites treated with CPAM and Nano‐SiC were significantly improved, with tensile strengths of 54.3 and 59.5 MPa, and flexural strengths of 85.1 and 91.5 MPa, respectively, and the water absorption of the composites was reduced after the modification treatment, while the thermal stability was improved. The degradation performance of the composites in various water environments indicated that the inclusion of LPWF accelerated the water degradation rate of the composites, with the maximum degradation rate of the composite reaching 1.26% in 30 days. Highlights: Laser print waste paper is an excellent quality recyclable fiber resource.Four modifiers were used to modify LPWF/PLA composites.Characteristics and degradability of the composites were investigated.Significantly improved properties of CPAM and Nano‐SiC modified composites.The degradation rate of composites is increased by the addition of LPWF. [ABSTRACT FROM AUTHOR]

The article from World Pumps discusses the challenges and opportunities faced by manufacturers in the pulp and paper market in Latin America. Despite challenges such as declining demand for traditional paper products and environmental concerns, the industry continues to thrive, with Latin America leading in kraft pulp production. The region's favorable climate, abundant resources, and infrastructure have contributed to rapid growth, with new plants being developed to meet increasing demand. Pump manufacturers play a crucial role in the production process, with digitalization and automation enhancing efficiency and performance in the industry. [Extracted from the article]

This study explored using ultrafiltration (UF) membranes to treat pulp and paper mill wastewater, implementing a novel Taguchi experimental design to optimize operating conditions for pollutant removal and minimal membrane fouling. Researchers examined four factors: pH, temperature, transmembrane pressure, and volume reduction factor (VRF), each at three levels. Optimal conditions (pH 10, 25°C, 6 bar, VRF 3) led to a 35% reduction in flux due to fouling and high pollutant rejections: total hardness (83%), sulfate (97%), spectral absorption coefficient (SAC254) (95%), and chemical oxygen demand (COD) (89%). Conductivity had a lower rejection rate of 50%. Advanced imaging techniques like atomic force microscopy (AFM) and scanning electron microscopy (SEM) revealed reduced membrane fouling under these conditions. The Taguchi method effectively identified optimal conditions, significantly improving wastewater treatment efficiency and promoting environmental sustainability in the pulp and paper industry. Practitioner Points: This study optimized UF membrane conditions for pulp and paper mill wastewater, reducing fouling and enhancing pollutant removal, offering practical strategies for industrial treatment.AFM and SEM provided key insights into membrane fouling and mitigation, promoting real‐time diagnosis and optimization for enhanced treatment efficiency.Prioritizing anaerobic fixed‐bed systems in wastewater treatment is beneficial for achieving high COD removal efficiency. Optimizing hydraulic retention time (HRT) in these systems can further improve their overall effectiveness and sustainability. [ABSTRACT FROM AUTHOR]

This work describes a novel technique for the measurement of inorganic arsenic in water by generating arsine gas and detecting the conductivity of moving protons, H+ (aqueous or aq), produced by the reaction: Ag+ (aq) + AsH3 (gas, g) → AgAsH2 (solid, s) + H+ (aq). The detection is based on an electrochemical gradient of protons in a confined porous substrate (filter paper) and measures the change in the conductance due to the higher mobility of H+ compared to other ions. The conductance was measured with a pair of silver electrodes attached to opposite sides of the substrate with a bipolar pulse conductance technique. The method is established in theory and in practice. The theoretical equation for conductance change shows that a constant increase in conductance is directly proportional to the As(total) concentration. The method is validated with a standard reference material and applied to the measurement of the groundwater sample. [ABSTRACT FROM AUTHOR]

The potential of combining stratified paper forming with pulp fractionation was investigated to improve the balance between low density, which enhances water absorbency and softness, and the dry strength of tissue papers. The selected fractionation approaches allowed us to separate especially stiff, low-fibrillated fibers (A fractions) from flexible, fibrillated fibers containing fines (detached segments of fibers, fibrils, or lamellae fragments) (B fractions). After characterizing the morphological properties of each fiber fraction, 20 g/m2 model papers were produced with and without wet pressing to tune the paper density. At a density of 0.3 g/cm³, the tensile breaking stress of B papers was at least three times higher than that of A papers. The strain at break of B papers was also close to two times higher than that of A papers. Interestingly, bilayer papers A/B exhibited breaking stress values intermediate between those of A and B papers, while native pulp papers, i.e., without fractionation and stratified forming, followed the trend of A papers. Notably, bi-layering the paper improved the breaking stress by up to twice as much without increasing the paper density, which could be highly beneficial in improving the balance of properties in tissue paper grades. [ABSTRACT FROM AUTHOR]

This paper examines the feasibility of extracting cellulose from tissue paper wastes (TPW’s) using several methods: sonication (SC), subcritical (SU), microwave (MC), and microwave with diluted acid (MA). The chemical characterisation and morphological properties of nanocrystal cellulose were investigated using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and scanning electron microscopy with energy dispersive X-Ray analysis (SEM-EDX). TPW’s have a relatively high crystallinity index (CrI = 61.02%). It was found to be lower than that for cellulose extracted using SU and SC MC, MA methods, where CrI to 65.65%, 68.07%, 69.21% and 73.42%, respectively. The MA method yielded cellulose with the highest CrI and altered surface morphology. This cellulose was selected for cellulose acetate synthesis. After acetylation, the CrI decreased to 61.45%, and the morphological aspect was changed. In conclusion, nanocrystal cellulose was successfully extracted from TPW’s and effectively changed to its esterified form. [ABSTRACT FROM AUTHOR]

This essay charts the way that ideas of nature, life and disease generated new approaches to Europe's documentary culture between roughly 1650 and 1950. Training its focus on the medium of paper, specifically the essay, reveals conceptual intersections between caretakers of libraries and archives and naturalists or physicians whose focus was the entomology or bacteriology. The recognition of the fundamentally organic nature of books (animal, vegetable, mineral, in a Linnaean sense) invited fresh vocabularies and practices of care and preservation. The essay first explores how book lovers—often encouraged by learned societies or state agencies in the eighteenth century—campaigned against insects whose habitat lay between the covers of precious tomes. It then traces how nineteenth-century microscopy and bacteriology informed notions of sickness or 'pathology' in books. It ends by describing the efforts to remediate these impairments in the twentieth century: to deploy chemistry and medicine as therapies for bringing imperilled papers back to health. [ABSTRACT FROM AUTHOR]

The arts of cutting and joining paper (katʿı and vas·s·¯ale) were much prized at the early-modern Ottoman court in Istanbul. This essay takes a single folio of katʿı prepared by the Ottoman paper joinery master (vas·s·¯al) Kalender Efendi (d. 1616) as a starting point from which to explore the essential role of paper in the administration and unification of the Ottoman Empire, shaping the state's relationships with its subjects, and making possible the environment in which Kalender was educated and rose to prominence. Through his skillful manipulation of paper, Kalender created intricate artworks that served as resting place for the eye and mind, astonishing viewers with his skills, and encouraging them to engage in insightful looking. Paper thus served as the locus of intellectual, artistic, and economic encounters, and gave shape to relationships both in the moment and over time [ABSTRACT FROM AUTHOR]

This special issue examines paper as it became the definitive material for both artistic practice and jurisprudence. European paper made from pulped rags and linens to create the mythic white empty grounds for design was foundational to early modern European ideas about both sovereignty and the creative act. The materiality of paper—as a surface created from refuse—also introduced a form of ecological thinking into both artistic practice and political theory that recognised the value and revolutionary potential of the material world to create from the detritus of failed projects and revolutions. Surveying artistic production across the European continent and into the Ottoman empire, this series of essays examines paper as both a material force that redefined the limits of the creative act while also being inseparable from the consolidation of new political regimes emerging from the rise of early modern colonialism. Paper was both the tool of dispossession and also the grounds on which the potential of artistic practice was reimagined. [ABSTRACT FROM AUTHOR]

Paper sludge (PS) from paper mills has a significant potential for bioethanol production. In this study, waste-paper-containing PS is used as the raw material for bioethanol production because the annual waste paper utilization rate has increased globally. Although PS does not require delignification, the antiseptics and deinking agents in waste paper-containing PS inhibit enzymatic reactions such as saccharification and fermentation. Their removal is important, but it has not yet been reported. Using subcritical water pretreatment, the selective decomposition of enzyme inhibitors in PS is examined without the generation of other enzyme inhibitors. The optimum pretreatment conditions are identified as 240 °C, 3.3 MPa, 3 min, and pH 4.5. Glucose was obtained in 71% yield from pretreated 5 wt% PS using cellulase, which is 5.5 times higher than that from unpretreated PS. This is because the reactivity of the pretreated PS increases with increasing surface area of the cellulose fibers, and the cellulase inhibitors are decomposed by subcritical water. Next, semi-simultaneous saccharification and fermentation treatments are performed to produce bioethanol from waste-paper-containing PS. The bioethanol yield based on cellulose after 96 h is 68% for PS pretreated with subcritical water, whereas the bioethanol yield is 6% for unpretreated PS. Therefore, subcritical water pretreatment increases the bioethanol yield by 11 times. The proposed method may enable the use of large amounts of PS as ethanol feedstock in future. [ABSTRACT FROM AUTHOR]

The increasing prevalence of fake publications created by paper mills poses a significant challenge to maintaining scientific integrity. While integrity analysts typically rely on textual and visual clues to identify fake articles, determining which papers merit further investigation can be akin to searching for a needle in a haystack, as these fake publications have non-related authors and are published on non-related venues. To address this challenge, we developed a new methodology for provenance analysis, which automatically tracks and groups suspicious figures and documents. Our approach groups manuscripts from the same paper mill by analyzing their figures and identifying duplicated and manipulated regions. These regions are linked and organized in a provenance graph, providing evidence of systematic production. We tested our solution on a paper mill dataset of hundreds of documents and also on a larger version of the dataset that deliberately included thousands of documents intentionally selected to distract our method. Our approach successfully identified and linked systematically produced articles on both datasets by pinpointing the figures they reused and manipulated from one another. The technique herein proposed offers a promising solution to identify fraudulent manuscripts, and it could be a valuable tool for supporting scientific integrity. [ABSTRACT FROM AUTHOR]

A new materials composed of TiFe particles stabilized onto a carbon support is described. The carbon support is derived from a waste from the paper industry called Kraft Black liquor. The particles are generated through an impregnation/reduction process of a mixture of titanium ethoxide and iron nitrate followed by a thermal treatment. The generated particles have been investigated through XPS, XRD and SEM analysis as well as tested for hydrogen storage. The hydrogen storage at 25 °C leads to a capacity of up to 0.5 wt% while at 150 °C, free of the carbon absorption, leads to a capacity of 0.2 wt% without any prior activation process. Novel TiF@carbo(HIPE) materials have been synthesized while employing Kraft black liquor as carbonaceous source. A specific carbo-reduction thermal treatment allows a synergetic TiFe particles external shell reduction concomitant with the surrounding carbonaceous backbone oxidation enhancing thereby the materials specific surface area and associated microporosity. Pre-activation free, TiFe@Carbo(HIPE) can achieve a capacity up to 0.5 wt% at 25 °C where TiFe particles and the carbonaceous host support are acting cooperatively. [Display omitted] • Generation and characterization of carbon from a waste from the paper industry. • Generation of TiFe nanoparticles on the carbon. • Characterization of the TiFe nanoparticles. • Use of the hybrid composite TiFe@Carbon for hydrogen storage. [ABSTRACT FROM AUTHOR]

Polyethylene terephthalate (PET) is a conventional packaging material. Its modification has attracted immense attention in the industry and academia. Here, office waste paper, white cardboard waste, and waste corrugated paper were first employed as raw materials for cellulose nanocrystal (CNC) extraction by acid hydrolysis. Thereafter, CNC/PET composite films with various CNC additions were prepared via a self‐assembly technique. The results revealed that the CNCs formed a self‐assembled film on the PET surface via the synergistic effect of the complex interactions among the CNCs as well as between the CNCs and PET. Moreover, the CNCs improved the barrier property of PET and decreased the oxygen and water vapor transmittances of CNC/PET by 30.7% and 21.7%, respectively. Additionally, the coating of the PET surface with 0.2 wt.% CNCs extracted from the waste paper decreased the surface wettability of PET, exhibiting application potentials in the hydrophobic modification of polymers. This study realized waste paper recycling and provided a basis for constructing self‐assembled functional films on PET surfaces. The findings and insights of this study could exhibit application potentials in the fields of waste recycling and packaging materials. Highlights: A functional cellulose nanocrystal (CNC) film is prepared from waste paper.Self‐assembled CNC is coated on a PET surface to form a CNC/PET composite film.The synergistic interactions among CNCs and between CNC and PET modified PET.The low addition of CNCs realized the efficiency modification of PET.The study achieves waste paper recycling and high‐value utilization. [ABSTRACT FROM AUTHOR]

In this study, the microstructure of carbon fiber paper is modified through H 3 PO 4 etching to enhance the electrolyzer performance. The effects of different H 3 PO 4 concentrations and different soaking times on the hydrogen evolution reaction are firstly investigated. The electrochemical test results show that the best performance of etched electrodes is achieved at a H 3 PO 4 concentration of 1 M and a soaking time of 12 h, with a significant reduction in charge transfer resistance and overpotential. Subsequently, to explore the change mechanism in electrochemical properties, the microstructure of the carbon paper is investigated using Scanning Electron Microscope (SEM) and Mercury Intrusion Porosimetry (MIP) tests, which show uniformly distributed micropores appear on the surface of the carbon fibers after etching, and the porosity increases from 0.74 to 0.8. Brunauer-Emmett-Teller (BET) tests show that the specific surface area of the carbon paper increases from 0.72 m2/g to 4.06 m2/g, which effectively increases the interfacial contact area between the catalyst layer and the liquid gas diffusion layer. Furthermore, a 3D multi-physics model is established to further elucidate the impact mechanism of changes in porosity, conductivity, and active specific surface area on the performance of anion exchange membrane electrolyzer, with changes in active specific surface area having the greatest effect. • Microporous structure of the carbon paper LGDL is modified by etching. • The etching method effectively improves the performance of AEMEL. • The increase in specific surface area and porosity greatly reduces the resistance. • Numerical modeling to analyze the impact of microscopic parameters on AEMEL. • LGDL with high specific surface area has a positive effect on AEMEL's development. [ABSTRACT FROM AUTHOR]

To develop special insulating paper is of great significance to promote the service life of transformers. Using molecular simulation to guide the development of special insulating paper can greatly reduce the trial-and-error rate and waste of resources in traditional experiments. The effect of different types of polysilsesquioxane (POSS) on cellulose insulating paper was investigated by using molecular simulation. This paper investigated the thermal stability and mechanical properties and electrical characteristics of caged POSS, semi-caged POSS, and ladder-like POSS doped cellulose insulating paper. The results show that POSS with all types can enhance the performance of cellulose insulating paper, and ladder-like POSS possess the best modification effect. The glass transition temperature was increased by 58 K, and the bulk modulus, shear modulus, and elastic modulus of cellulose insulating paper doped with ladder-like POSS can improve up to 27.07%, 45.67%, and 41.28%, respectively. Meanwhile, the dielectric properties of ladder-like POSS modified insulating paper are also significantly improved. The findings of this paper propose a method for the preparation of ladder-like POSS modified insulating paper, which provides theoretical guidance for the experimental preparation of special insulating paper. [ABSTRACT FROM AUTHOR]

Saccharification of cellulosic material is crucial before utilizing it as the feedstock of fermentation processes. This study focuses on developing of robust catalysts for enzymatic hydrolysis of paper waste. Cellulase enzyme was immobilized on Fe3O4 magnetic nanoparticles (MNPs) via multi-covalent bonds. Therefore, the attachments of MNPs were performed by three approaches (3-aminopropyl)triethoxysilane (APTES) (Method I), polyethyleneimine (PEI) (Method II), and both monolayer molybdenum disulfide and PEI (MoS2-PEI) (Method III). The biocatalysts were characterized using Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA). The immobilization yield and loading efficiency of cellulase were determined at 38.65% and 162 mg g−1 in Method I, 13.33% and 31 mg g−1 in Method II, and 14.38% and 33 mg g−1 in Method III. The specification of the biocatalysts was determined for the hydrolysis of filter paper, carboxymethylcellulose (CMC), microcrystalline cellulose, and cellobiose. The total cellulase activity was 2.77, 0.943, 1.38, and 2.02 µmolGlucose mgEnzyme−1 h−1for free-cellulase and the immobilized biocatalysts prepared by Method I, II, and III, respectively. The prepared biocatalyst in Method I maintained 54.54% of its original activity after five cycles, which was more robust than Method II (20.25%) and Method III (12.33%). Further studies were performed on the saccharification of paper waste. The results showed the biocatalyst obtained by Method II resulted in 5.8 folds of higher glucose than the free-cellulase. The highest glucose recovery of about 72.47% was achieved after 48 h using the immobilized biocatalyst prepared by Method II. [ABSTRACT FROM AUTHOR]

Oral contraceptives (OC) are the most used form of contraception among women in the U.S. and Europe. Like other medications, their packaging must include patient information leaflets. This study quantifies the environmental impact of paper waste generated by these leaflets. We conducted an observational analysis, measuring the weight of leaflets, pills, and packaging components across various OC brands. Significant variations in leaflet weights were observed. On average, leaflets accounted for 55% of the package weight, while pills and blister dispensers represented only 32%. The mean weight of OC leaflets was 12.3 ± 5.5 grams (4.7–21.9 grams), leading to an estimated annual paper waste of 6,118.4 tons, 5,763.5 tons of carbon dioxide equivalent emissions, and the use of approximately 146,841 trees for production. Standardizing leaflet weight to the lightest reported can reduce annual waste by 3780.5 tons of paper. This study highlights the substantial environmental cost of the waste generated from OC leaflets and proposes practical strategies to mitigate waste, including electronic leaflets and standardized packaging. Targeting these materials presents a significant opportunity to enhance sustainability, aligning with global efforts to reduce greenhouse gas emissions from the healthcare sector. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the influence of dammar resin on the mechanical properties of composite materials reinforced with corn husk and paper waste laminates. Different percentages of dammar resin (50%, 60%, and 70%) were added to the matrix while keeping the reinforcement constant. For all samples, the ratio was maintained at 40% matrix and 60% reinforcement. With the experimental results obtained, statistical analyses were conducted: two-way analysis of variance (ANOVA), Levene's test, Shapiro-Wilk test, and ANOVA post hoc (with Bonferroni correction). The null hypothesis stated that dammar resin does not influence the mechanical properties. For all tests considered, the null hypothesis was rejected (p < 0.05), the variances were homogeneous (p > 0.05), and the data followed a normal distribution (p > 0.05). It was found that dammar resin had a significant influence on the mechanical properties as the percentage increased from 50% to 70% (p < 0.0083). For each test, based on already known premises, an explanation of the phenomenon that could occur due to the insertion of dammar resin was provided, serving to complement and validate the statistical estimations. [ABSTRACT FROM AUTHOR]

This study investigated the effects of shredded waste office paper as a raw material on the physical and mechanical properties of fiberboard. Two amounts of urea formaldehyde (UF) resin (10 and 15%) and five shredded waste office paper/wood fiber mixing ratios (0/100, 25/75, 50/50, 75/25, and 100/0) were selected. The findings showed that all characteristics of boards were improved with an increase in resin content at various wastepaper participation ratios. The 15% UF-bonded board with 100% wood fiber had the highest modulus of rupture (MOR) value, but there was no statistically significant difference between it and the board with 50% wastepaper. The modulus of elasticity (MOE) values of the 15% UFbonded boards increased as the wastepaper participation ratio increased, and the highest was obtained from the board with 75% wastepaper. The highest internal bond (IB) strength value was also recorded from the 15% UF-bonded board with 50% wastepaper. This was due to the presence of sufficient bonding potential and smoother surfaces in the shredded wastepaper, which allowed for a synergistic interaction between the wastepaper and wood fiber. [ABSTRACT FROM AUTHOR]

In the present era of agricultural digitalization, documenting on-farm operations is critical. These records contextualize other layers of data and underpin economic analysis and informed decision-making. On-farm recordkeeping is rooted in an ancient tradition and has evolved from pen and paper to digital means integrating diverse tools and methods. These tools vary widely in mode of data recording and this presents challenges in achieving complete, accurate and interoperable data. Assessing this diversity of existing recordkeeping systems is a key step toward the improvement in recordkeeping systems that enhance data quality and interoperability. Despite the importance, as of present, comprehensive studies addressing this challenge are lacking. A systematic review of existing on-farm recordkeeping systems was carried out to address their advantages and weaknesses and to analyze their features and traits, focusing on interoperability and adherence to efficient and comprehensive on-farm recordkeeping. Paper-based recordkeeping, a longstanding and reliable method, is gradually being replaced by digital platforms. Many universities and agencies have released farm management spreadsheets and interactive database forms representing the initial step toward intuitive recordkeeping. Furthermore, farm management software, web apps, and user-friendly smartphone apps are increasingly crucial for handling agricultural big data. Notably, among the surveyed software packages and apps, most of them are not free and only a few support data interoperability. The survey also indicates a scope for further development in open-source tools with automation in recordkeeping. Adopting digital on-farm recordkeeping tools can positively impact both on and off the farm, fostering data interoperability, controlled yet flexible data access, completeness, and appropriate accuracy. [ABSTRACT FROM AUTHOR]

Nanorod structures exhibit a high surface-to-volume ratio, enhancing the accessibility of electrolyte ions to the electrode surface and providing an abundance of active sites for improved electrochemical sensing performance. In this study, tetragonal α-MnO2 with a large K+-embedded tunnel structure, directly grown on microfibrous carbon paper to form densely packed nanorod arrays, is investigated as an electrocatalytic material for non-enzymatic glucose sensing. The MnO2 nanorods electrode demonstrates outstanding catalytic activity for glucose oxidation, showcasing a high sensitivity of 143.82 µA cm−2 mM−1 within the linear range from 0.01 to 15 mM, with a limit of detection (LOD) of 0.282 mM specifically for glucose molecules. Importantly, the MnO2 nanorods electrode exhibits excellent selectivity towards glucose over ascorbic acid and uric acid, which is crucial for accurate glucose detection in complex samples. For comparison, a gold electrode shows a lower sensitivity of 52.48 µA cm−2 mM−1 within a linear range from 1 to 10 mM. These findings underscore the superior performance of the MnO2 nanorods electrode in both sensitivity and selectivity, offering significant potential for advancing electrochemical sensors and bioanalytical techniques for glucose monitoring in physiological and clinical settings. [ABSTRACT FROM AUTHOR]

Conference proceedings are valuable sources for research, providing insights into individual or organisational projects. Australian library and information services (LIS) professionals have the opportunity to contribute to a robust conference culture, including the biennial library technology VALA conference. Practice-driven conferences can offer interpretations of LIS practitioner experiences, however, there is limited research focusing on Australian LIS conference proceedings. The VALA conference papers offer a unique record of technology's impact, influence, and implementation in Australian LIS organisations over the last forty years. This article will outline the objective and methodology of an ongoing research project undertaking historical analysis of VALA conference papers. The research project seeks to examine key themes, theories, and tools discussed in VALA conference papers and will attempt to identify if evolving technology influences the practices and attitudes of Australian LIS practitioners. The article will identify the research methods and the content analysis techniques that will be used in the project, and present preliminary results from a pilot study presented at the 2023 RAILS conference. [ABSTRACT FROM AUTHOR]

In response to Andrew Benjamin Bricker's demonstration of the usefulness of printers' ornaments in the identification of the pseudonymous "A. Moore," this note suggests that printers' waste is another method. The Trade Sale Catalogues in the John Johnson Collection in the Bodleian Library show that booksellers preserved printed waste sheets of their own publications. There is no evidence that they retained such sheets of the publications of others. This strongly suggests that possession of waste is an indication of responsibility for publication. The note gives two examples of such methodology, one showing Thomas Warner having published as A. Moore, and the other showing John Baker publishing anonymously. [ABSTRACT FROM AUTHOR]

Composites are pivotal in Europe's evolving packaging sector, which is undergoing changes due to circular and bioeconomy initiatives, which prioritize eco‐friendly packaging. Despite paper's high recycling rates, dynamic markets challenge recycling and circularity. Innovative paper‐based composites demand flexible recyclability assessments, which impacts product development. Recyclability methods are evolving as they struggle to match the dynamic changes occurring in the packaging sector. This article outlines paper recycling and compares global lab recyclability evaluation methods. [ABSTRACT FROM AUTHOR]

This research unveils a transformative methodology for fabricating flexible printed circuit boards (PCBs), focusing on the unique attributes of filter paper substrates. A meticulous parametric exploration scrutinizes critical aspects such as buckling resistance, charging current, plating time, and electrode configurations for copper electroplating. Key findings highlight the exceptional stability of copper electroplating on filter paper, exhibiting robust resistance against environmental variations and bending angles spanning +180° to −180°. Utilizing higher pencil grade material and maintaining a minimum 4 cm distance with a voltage range of 3 to 1.44 V ensures uniform, controlled plating without burning, optimizing the electrode area below 1 cm2 for enhanced practicality. The research underscores the longevity and durability of copper‐plated filter paper, with negligible resistance changes even after 1000 folds. Over a year, the shelf‐life assessment emphasizes the excellent stability of electroplated filter paper. Practical applications, including fully functional circuits and a bio‐degradable piano, underscore the versatility and real‐world feasibility of the proposed electroplating technique. [ABSTRACT FROM AUTHOR]

Direct air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC. [ABSTRACT FROM AUTHOR]

The paper and paper products sector is a crucial component of the Turkish economy, characterized by significant interactions with various other sectors. Türkiye imports substantial amounts of paper, playing a vital role in the growth and sustainability of this sector. Accurate import forecasting is essential for strategic planning and resource management. This study aims to forecast the imports of the Turkish paper sector for the period from April 2023 to March 2024 using two artificial neural network (ANN) models: Multilayer Perceptron (MLP) and Radial Basis Function (RBF). The dataset, obtained from the Turkish Statistical Institute (TurkStat), covers 219 months of data from 2005 to 2023. The dependent variable is Türkiye’s monthly import value of paper and paper products, while the independent variables include the monthly average US Dollar exchange rate, monthly imports of Türkiye, the Manufacturing Industry Production Index, the Paper Production Index, and the monthly exports of paper and paper products from Türkiye. The MLP model forecasts that the monthly imports of paper and paper products will range between 270 to 300 million USD, while the RBF model predicts values between 268 and 321 million USD. These findings underscore the efficacy of ANNs in providing accurate and reliable forecasts. This study addresses a gap in the literature by applying ANN methods to forecast imports in the paper and paper products sector, presenting a novel approach that can assist companies in making better-informed decisions regarding inventory management, production planning, and marketing strategies. By leveraging the advanced computational power and pattern recognition capabilities of ANNs, the study aims to enhance the strategic planning processes in the paper and paper products industry. The traditional methods often used in trade data analysis and forecasting are limited in capturing the complex and non-linear relationships present in economic data. This study's application of ANNs offers a significant advancement by utilizing models that can better handle such complexities. The accuracy of the MLP and RBF models highlights their potential as valuable tools for economic forecasting, providing insights that are crucial for optimizing supply chain operations and improving market responsiveness. The results indicate that companies can achieve better operational performance and increased customer satisfaction by effectively forecasting future import requirements. The originality of this study lies in its methodological approach, utilizing ANN models to forecast import values in a sector where traditional methods have been predominant. This innovative approach not only contributes to the existing body of knowledge but also offers practical applications for businesses within the sector. The detailed analysis of the data, combined with the robust modeling techniques employed, provides a comprehensive framework for understanding the dynamics of paper imports and making strategic decisions based on accurate predictions. In conclusion, the study demonstrates the significant success of artificial neural networks in predicting import values for the Turkish paper and paper products sector. The findings provide valuable information that can aid companies in strategic planning, enhancing their ability to manage inventory, plan production, and develop effective market strategies. The research contributes to the literature by filling a gap with its innovative approach, offering new perspectives and practical applications for improving decision-making processes in the industry. [ABSTRACT FROM AUTHOR]

Baicalin (Bn) is one of the flavonoids with various biological activities, and its accurate determination is of great significance to clinical medicine. The new "MOF-on-MOF" materials have a broad application prospect. ZIF-67 and MIL-101(Fe) are typical metal–organic frame (MOF) materials, which have the advantages of flexible structure, large specific surface area, large porosity, and adjustable pore size. In this paper, a disposable and sensitive Bn electrochemical sensor based on ZIF-67/MIL-101(Fe) composite modified carbon paper (CP) electrode was developed for the first time. The sensing nanomaterials were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction spectroscopy (XRD), and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) was used to evaluate the electrochemical behavior of Bn on different modified electrodes. The results showed that ZIF-67/MIL-101(Fe)/CP exhibited a well-defined redox peak compared with bare CP, ZIF-67/CP, and MIL-101(Fe)/CP, which was attributed to the synergistic effect of ZIF-67 and MIL-101(Fe). Under optimal conditions, the electrochemical sensor was able to quantify Bn in the ranges of 0.01 ~ 3 µM and 3 ~ 6 µM with a detection limit (LOD) as low as 0.009 µM (S/N = 3). In addition, the sensor was successfully used for the quantitative analysis of Bn in Dual yellow oral liquid with reliable results. [ABSTRACT FROM AUTHOR]

Carbon fiber paper (CFP) is one of the most widely used gas diffusion layer materials for proton exchange membrane fuel cells (PEMFC) due to its excellent properties such as high conductivity, high strength, high air permeability and corrosion resistance. In this study, CFP was prepared using the phenolic resin (PF) in-pulp addition method. The effect of PF content on the properties of hot-pressed paper (HPP) and CFP was investigated. The results showed that when the dosage of polyethylene oxide (PEO) was 1.5 wt%, the flocculation effect of PEO on PF was basically complete, and the water filterability and retention of carbon fiber pulp were relatively optimal. After HPP was carbonized into CFP, the hydrophobicity, average pore size, porosity, and air permeability increased, while the resistivity and tensile strength decreased. With the increase of PF content, the tensile strength of CFP gradually increased, while the average pore size, porosity, air permeability and resistivity decreased. When the PF content was 250 wt%, the average pore size of CFP was 36.5 μm, the water contact angle was 127°, the porosity was 69.7%, the air permeability was 7.81 × 103 mL mm/(cm2·h·mmHg), the resistivity was 21.1 mΩ cm, and the tensile strength was 15.7 MPa. In addition, the CFP prepared using PF in-pulp addition method had a relativity uniform pore size distribution and high air permeability. Therefore, this work shows that the CFP prepared using this technique exhibits excellent comprehensive performance, and enables the manufacturing of CFP to be more efficient, low-cost, and environmentally friendly. [Display omitted] • Carbon fiber paper was prepared efficiently using the phenolic resin in-pulp addition method. • Polyethylene oxide exhibits strong adsorption ability on phenolic resin in carbon fiber pulp. • The melting temperature of phenolic resin is a critical point in the preparation process of carbon fiber paper. • Carbon fiber paper possesses a relatively uniform pore size distribution and high air permeability. [ABSTRACT FROM AUTHOR]

Flexible paper-based materials play a crucial role in the field of flexible electromagnetic shielding due to their thinness and controllable shape. In this study, we employed the wet paper forming technique to prepare carbon fiber paper with a thickness gradient. The electromagnetic shielding performance of the carbon fiber paper varies with the ladder-like thickness distribution. Specifically, an increase in thickness gradient leads to higher reflectance of the carbon fiber paper. Within the X-band frequency range (8.2–12.4 GHz), reflectivity decreases as electromagnetic wave frequency increases, indicating enhanced penetration of electromagnetic waves into the interior of the carbon fiber paper. This enhancement is attributed to an increased fiber content per unit area resulting from a greater thickness gradient, which further enhances reflection loss and promotes internal multiple reflections and scattering effects, leading to increased absorption loss. Notably, at a 5 mm thickness, our carbon fiber paper exhibits an impressive average overall shielding performance, reaching 63.46 dB. Moreover, it exhibits notable air permeability and mechanical properties, thereby assuming a pivotal role in the realm of flexible wearable devices in the foreseeable future. [ABSTRACT FROM AUTHOR]

Although the Paralympic Games have been around for over 60 years, women remain underrepresented in almost all aspects of the Paralympic Movement. It has been suggested that a way to increase women's involvement is through the implementation of mixed-gender events. On paper, this approach makes sense. However, when it comes to the implementation of mixed-gender opportunities for women, it is less clear how effective these events are in increasing participation by women in Para sport. Through document analysis and interviews with athletes and organizers of mixed-gender Paralympic sport, we explore the various strategies that four mixed-gender sports have used to address the issue of gender parity. Using critical feminist theories, we illustrate how larger social, political, and cultural ideas about gender influence women's experiences within these events and discuss the potential of using mixed-gender initiatives to address gender parity within the Paralympic Movement. [ABSTRACT FROM AUTHOR]

Background: As the demand for digital dentistry constantly increases, digital devices are gradually replacing conventional methods of recording occlusal contacts. The study aimed to assess the inter-rater reliability of occlusal contact point detection using 40 μm articulating paper, Medit i700, and OccluSense and to compare the distribution of occlusal contacts using the articulating paper and intraoral scanner. Material and Methods: The study included 25 participants aged 20 to 30 (13 women and 12 men). Photographs of contact points were taken and marked in maximum intercuspal position (MIP), in protrusive and laterotrusive movements, on working and non-working sides using 40 μm articulating paper and digital devices. The Cohen's Kappa coefficient assessed the inter-rater reliability. The Wilcoxon signed-rank test was used to compare dependent groups, articulating paper, and Medit i700. Results: The Cohen's Kappa index showed that almost perfect agreement was achieved with 40 μm articulating paper. Compared to Medit i700, the 40 μm articulating paper showed an increased mean number of contacts per tooth, except for the third molars. Conclusions: The 40 μm articulating paper has detected more overall contacts than the digital devices, particularly in the posterior areas. An ideal method for registering occlusal contacts has not been established yet. [ABSTRACT FROM AUTHOR]

The sulfuric acid-doping polyaniline (H-PANI-HSO4) are applied to conduct the electrochemical measurement and simulation calculation to investigate the capacitance, electronic structure and energy band properties. The H-PANI-HSO4 growing on graphite carbon paper (H-PANI-HSO4/GCP) is applied as an electroactive electrode to investigate electrochemical properties. The Faradaic capacitance of H-PANI-HSO4/GCP electrode is ascribed to the reversible redox reaction of bisulfate anion doping/dedoping protonated PANI (H-PANI). Cyclic voltammetry measurement at a scan rate of 5mVs−1 determines an equivalent mean response current of 0.64Ag−1 and a capacitance of 128.35Fg−1. Galvanostatic charge–discharge measurement determines specific capacitance from 129.06 to 116.88Fg−1 at current densities from 0.5 to 2.5Ag−1. Cyclic voltammetry-based capacitance at equivalent current density of 0.64Ag−1 is in accordance with galvanostatic charge–discharge-based capacitance at the current density of 0.57Ag−1. Electrochemical impedance spectrum measurements indicate that H-PANI-HSO4/GCP exhibits lower charge-transfer resistance, much lower Warburg resistance, higher quasicapacitance than H-PANI-HSO4 to approaching ideal capacitor. Density functional theory calculations indicate that H-PANI-HSO4 has a higher density of states (10.6 electron/eV) and lower bandgap energy (0.481eV) than H-PANI (5.24 electron/eV, 1.449eV), indicating its enhanced electronic conductivity. The electronic bandgap energy is accordingly decreased from 0.263eV for H-PANI-HSO4/GCP to 0 for H-PANI-HSO4/GCP. Electrochemical measurement and simulation calculation investigation proves that H-PANI-HSO4/GCP electrode with anion-doped and protonated state exhibits higher electronic conductivity and capacitance performance to act as superior electroactive material. [ABSTRACT FROM AUTHOR]

The mineralization of inorganic components in paper sludge offers potential for their re-use in various fields. This study synthesized carbonates based on the minerals present in paper sludge and aimed to investigate the control of particle size distribution and particle shape of the synthesized carbonates. First, the physicochemical and thermal properties of paper mill sludge and ash were evaluated using a spectrophotometer, XRF, and TGA. Paper sludge ash was obtained by incinerating the paper sludge, followed by a carbonation reaction using CO2 gas injection and pH neutralization to produce recycled fillers. The average particle size, crystal lattice structure, and morphology of the recycled fillers were analyzed using a particle size analyzer, XRD, and FE-SEM. The results indicate that the recycled filler produced from coating paper sludge exhibited similar brightness and morphology to conventional paper-based fillers, suggesting its potential to replace commercial PCC (Precipitated Calcium Carbonate). In contrast, the recycled filler manufactured using old corrugated container mill sludge was deemed unsuitable due to its low hydration activity. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to investigate the effects of a pigment coating on the mechanical properties of fluting paper. Design/methodology/approach: Two different calcium carbonate pigments were used in the preparation of the coated color, precipitated calcium carbonate (PCC) and ground calcium carbonate (GCC). Fluting paper produced by recycling waste paper was used as base paper. The effects of PCC and GCC pigments on mechanical properties were compared. Ring crush test (RCT), corrugating medium test (CMT), corrugating crush test (CCT), tensile and burst strength tests were applied to the coated papers, and the results were compared to the mechanical properties of base paper. Findings: The tensile and burst indices of the coated papers were found to be higher than base papers about 13.9% and 6.05%, respectively. While the coating process positively affected the RCT and CCT values, it did not show a significant impact on the CMT values. GCC, one of the pigments used in coating colors, had a more effective effect on the mechanical properties of fluting papers compared to PCC. Originality/value: These results suggest that coating of fluting papers has a positive effect on mechanical properties and the use of GCC as a pigment is more effective than PCC. [ABSTRACT FROM AUTHOR]

[Display omitted] • Chemical profiling of different paper grades was performed along the recycling chain. • Untargeted analysis of semi-volatiles and non-volatiles using GC- and LC-MS. • Chemometrics application to identify specific features by paper grade and site. • Exploration of the possible sources of detected compounds in the paper recycling chain. • Numerous chemical compounds associated with plastics have been detected. Paper packaging made with recycled paperboard is used to pack various consumer goods that can include amongst others, electronics, toys, food, cosmetics, and stationery. Chemical profiling of the various paper recycling grades used in the manufacture of recycled paperboard was undertaken to investigate possible sources of contaminants and their propagation in the paper recycling chain. Pre-consumer, retail and post-consumer paper-based materials were collected at papermills, corrugators, grocery stores, household waste, solid waste disposal sites and recycling facilities. In the GC-MS analysis, phthalates, long-chain aliphatic compounds, and fatty acids were the most commonly detected compounds whilst phthalates and bisphenols featured most prevalently in the LC-MS analysis. The factors that were identified as likely contributors to the detection of the different chemical compounds included the presence of wood derivatives, the use of certain chemical additives during manufacturing, and exposure of paper to contaminants from consumers, other goods and the environment. Waste mingling, recovery, sorting and reprocessing into recycled paper were also shown to influence the chemical profile of paper materials. Sparse partial least squares-discriminate analysis indicated that newspaper and office paper had unique chemical constituents, whilst cartons were shown to have higher variability. By looking at key stages of paper recycling, this study showed that the possible persistence and transformation of chemical compounds in additives must be evaluated when considering the recyclability of paper-based materials. Further, it highlighted that different separation approaches may be required to reduce contaminant exposure opportunities in post-consumer paper materials. [ABSTRACT FROM AUTHOR]

The biodegradation kinetics of paper materials with various chemical additives was studied, focusing on their potential tunability. Paper materials with additives, including retention aid, hydrophobic agent, and wet and dry strength agents, were explored in two forms: disintegrated fiber and paper form. Using the Gompertz equation, biodegradation kinetics were modeled to calculate the lag phase, initial biodegradation rate, and ultimate biodegradation extent. All paper materials showed higher biodegradation extents than microcrystalline cellulose (MCC) due to the highly biodegradable nature of hardwood bleached pulp. Disintegrated paper materials exhibited similar lag phase values and ultimate biodegradation to MCC regardless of treatment, while punched paper materials showed noticeable differences, suggesting that fiber disintegration plays a critical role in initiating biodegradation. Hydrophobic and wet strength treatments, such as alkyl ketone dimer (AKD) and wetstrength agents (PAE), respectively, significantly increased the lag phase, but their ultimate biodegradation extent remained intact. These findings highlight that the biodegradability of paper materials can be preserved even after chemical treatments, underscoring their environmentally friendly potential. [ABSTRACT FROM AUTHOR]

Pretreated carboxymethylated nanofibrillated cellulose (CM-NFC) was tested as a strength enhancer for specialty paper, such as banknotes made from cotton linter mixed pulp (CLMP). The pretreatment agent was cationic poly(acrylamide) (C-PAM). The CM-CMF prototype was supplied by a Korean manufacturer. Laboratory tests and pilot trials were performed to evaluate the strength enhancement of banknotes incorporated with surface-modified CM-NFC and determine the process problems encountered in a pilot paper machine. The CM-NFC was surface modified with 0.1% C-PAM without any agglomerates. The prepared laboratory handsheets had high paper strength, which was attributed to the higher nanofibril content of surface-modified CM-NFC compared with that of unmodified CM-NFC. Pilot trials showed that the incorporation of 3% surface-modified CM-NFC was highly effective in promoting the strength of banknote without low retention and drainability on the wet-end part of the pilot paper machine. Therefore, surface-modified CM-NFC at a controlled dosage could be used as a strength enhancer for specialty paper without incurring serious problems in a paper mill. [ABSTRACT FROM AUTHOR]

Grease-proof paper is an energy-demanding paper product to manufacture, especially during refining and dewatering. Increases in energy efficiency in either stage could result in major savings. This article investigates the potential gains with addition of a stepwise progression vacuum suction box to the forming section during production. For both a lighter, 50 g/m², and a heavier paper grade, 100 g/m², with a pulpdrainability of 86 °SR, a stepwise progression vacuum suction box in four steps would result in increased dryness, simultaneously with decreased energy expenditure. The observed effects were higher for the lower basis weight paper (50 g/m²). Both basis weights experienced clogging of the forming fabric due to the high degree of refining. This adversely affected the dewatering rate, decreasing the amount of air pulled through the paper even when increasing the vacuum pressure. When a stepwise progression suction box in four steps was compared to a single vacuum suction box, there was a 14% increase in dryness for lighter paper, over an equal energy consumption, measured as amount of air pulled through the paper. For the 100 g/m² paper, the increase in dryness was 3% compared to the 50 g/m² paper run over a single vacuum suction box. The results show great promise for energy savings when utilizing stepwise progression suction box dewatering for grease-proof paper production. [ABSTRACT FROM AUTHOR]

Due to a shortage of resources, exploring new biomass fillers has become critical for paper making. In this study, we reported an eco-friendly strategy for fabricating low-cost and efficient recycled paper with high mechanical properties using corrugated cardboard waste paper and harmless municipal sludge (HMS). First, the characteristics of HMS, including the particle size, pH, specific surface area, organic functional groups and organic component content, were analyzed. Then, the influence of the amount of HMS on the properties of the recycled paper was studied. Finally, the strengthening mechanism of biomass filling recycled paper was discussed. The results showed that HMS, a biomass filler for recycled paper preparation, exhibited excellent physical and chemical properties, with a median particle size of 6.395 μm, a surface area of 39.974 m2 g−1 and organic functional groups. The tensile index of the recycled paper with 30 % HMS was 13.10 Nm/g, which was 16.4 % greater than that of the unfilled paper and showed better thermal stability. This excellent performance could be attributed to the uniform distribution of HMS on the fiber surface, which improved the accessibility of hydrogen bond formation between fibers. Thus, this study proved that HMS was an excellent biomass filler for producing recycled paper. [ABSTRACT FROM AUTHOR]

Nairobi's land digitisation programme presents continuous challenges to the Kenyan state's aspirations of reforming land administration. By drawing upon insights from archival sciences and digital geographies, this paper argues that digitisation of Kenya's land administration records presents us with an opportunity to pay attention to how information flows from paper to digital systems, and the nature of human condition that makes it possible. Based on research of land digitisation initiatives in Nairobi and its peripheral counties, this paper explores first, how digitisation initiates a large‐scale state exercise of sorting paper in the land records departments that constitutes the archival apparatus of the state; and second, how the archival labour of state officials in this process is at the same time significant, invisible and devalued. Through interviews of state officials in county and state departments, we argue that the digitisation process is far more complex and messier than the rhetoric of seamless transition to automated land administration in Kenya. Digitisation involves a slow embodied labour in sorting paper by state officials who have little power in shaping the design of the platform that they are expected to use. The devaluation of the archival labour of state officials who are not professionally trained in 'archival practice' and are seemingly voiceless in the production of national land information platforms leads to subversion and non‐cooperation with the platform itself. The paper concludes that an expansive lens of seeing digital platforms through the tools and technologies of archiving practices enables us to understand why platforms fail, why and how paper increases value within digital systems and how archival labour is central to the politics of digitisation and platformisation in the future. [ABSTRACT FROM AUTHOR]

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water. [ABSTRACT FROM AUTHOR]

An inexpensive, easy-to-use, simple, and non-toxic freshness indicator was developed based on anthocyanins from saffron petal waste material and filter paper to show the quality and shelf life of trout fillets. Previous studies considered the color changes of freshness indicators based on anthocyanins during fish spoilage due to pH changes following the production of volatile nitrogen. However, in this study, we showed that not only volatile nitrogen but also hydrogen sulfide (H2S) gas produced during fish spoilage caused structural and color changes in anthocyanins. The indicator showed a wide range of naked-eye color changes from purple to light blue over a pH of 2–11 and from purple to yellow over different concentrations of H2S gas compounds. The prepared indicator had good color stability and was not affected by various temperatures and times. pH, total volatile basic nitrogen, total viable count of trout fillets, and the color changes of the prepared indicators were simultaneously determined during 8 days of storage in the refrigerator. A significant correlation was observed between fish quality and visible color changes of the indicator. The sensitivity of saffron petal anthocyanins to volatile nitrogen and H2S compounds showed that it could be used as a raw material for producing low-cost and efficient colorimetric indicators for spoilage detection of protein-rich foods. [ABSTRACT FROM AUTHOR]

Plastic pollution at the nanoscale continues to pose adverse effects on environmental sustainability and human health. However, the detection of nanoplastics (NPLs) remains challenging due to limitations in methodology and instrumentation. Herein, a "green approach" for surface-enhanced Raman spectroscopy (SERS) was exploited to detect polystyrene nanospheres (PSNSs) in water, employing untreated filter paper and a simple syringe-filtration set-up. This SERS protocol not only enabled the filtration of nano-sized PSNSs, which are smaller than the pore size of the ordinary filter paper, but also offered SERS enhancement by utilizing quasi-spherical-shaped silver nanoparticles (AgNPs) as the SERS-active substrate. The filtering of NPLs was accomplished by adding an aggregating agent to the nanoparticle mixture, which caused the aggregation of NPLs and AgNPs, resulting in a larger cluster and more hot spots for SERS detection. The optimal aggregating agent and its concentration, as well as the volume ratio between the AgNPs and NPLs, were also optimized. This SERS method successfully detected and quantified PSNSs of various sizes (i.e., 100, 300, 460, 600, and 800 nm) down to a limit of detection (LOD) of about 0.31 μg mL−1. The method was also validated against the presence of several interferents (i.e., salts, sugars, amino acids, and surfactants) and was proven practical, as evidenced by the detection of 800nm PSNSs in drinking and tap water (LODs of 1.47 and 1.55 μg mL−1, respectively). [ABSTRACT FROM AUTHOR]

Simple Summary: This study emphasizes the significance of appropriate air-drying times in toxicity bioassays to accurately establish sublethal concentrations and discriminating concentrations for resistance detection in mosquitoes to a highly volatile pyrethroid, namely, transfluthrin. The high-throughput screening system toxicity bioassay study demonstrated consistent dose-dependent responses in susceptible mosquito populations. Our findings emphasize the importance of accurate susceptibility testing to facilitate early resistance detection. The air-drying duration significantly affected the efficacy of transfluthrin: after drying for 24 h, the concentration needed to achieve the same level of efficacy was 2.8 times higher compared to the concentration needed after 1 h of drying. This is the first study to evaluate spatial repellents using a high-throughput screening system toxicity bioassay, yielding precise sublethal concentrations and discriminating concentrations for varying air-drying times of transfluthrin-treated filter papers. The study underscores the importance of early detection of resistant mosquito populations and emphasizes the need to optimize air-drying durations in toxicity bioassays. Selecting the right concentrations and assessing behavioral responses are crucial for developing effective mosquito control strategies with spatial repellents. This research enhances our understanding of resistance dynamics and provides guidance for practical implementation in vector control programs. Increasing temperature can enhance the geographical spread and behavior of disease vector mosquitoes, exposing vulnerable populations to Aedes-borne viruses and infections. To address this risk, cost-effective and sustained intervention vector control tools are required, such as volatile pyrethroid spatial repellents. This study used a high-throughput screening system toxicity bioassay to determine the discriminating concentrations of transfluthrin-treated filter papers with variable air-drying times exposed to pyrethroid-susceptible Aedes aegypti mosquitoes. At the highest transfluthrin concentration (0.01706%), a significant reduction in mosquito mortality was observed in filter papers air-dried for 24 h compared to those air-dried for 1 h (odds ratio = 0.390, p < 0.001, 95% confidence interval: 0.23–0.66). Conversely, no significant difference in mortality was found between filter papers air-dried for 1 h and those air-dried for 12 h (odds ratio = 0.646, p = 0.107, 95% confidence interval: 0.38–1.10). The discriminating concentration was 2.8-fold higher for transfluthrin-treated filter papers air-dried for 24 h than it was for papers air-dried for 1 h, and it increased 5-fold from 1 h to 336 h of air-drying. These results show that the optimal air-drying period of transfluthrin-treated filter paper is critical, as higher discriminating concentration values may lead to underestimations of insecticide resistance. The instability of transfluthrin-treated papers necessitates the use of the World Health Organization (WHO) bottle bioassay, which is the preferred method for determining mosquito susceptibility to volatile insecticides. [ABSTRACT FROM AUTHOR]

A pre-treatment process was evaluated in this work for wastewater from paper recycling using microwave technology followed by rapid precipitation of contaminants through centrifugation. Artificial neural networks (ANNs) were used to analyze and optimize the turbidity values. Thirty experimental runs were utilized including microwave (MW) power, duration, centrifuge time, and centrifuge speed as input variables, generated by the Central Composite Full Design (CCFD) approach. The experimental turbidity ranged from 8.1 to 19.7 NTU, while predicted values ranged from 8.4 to 19.7 NTU by ANN. The ANN model showed a robust prediction performance with low mean squared error values during training and testing. Moreover, high R² values showed a remarkable agreement between the experimental observations and ANN predictions. The results obtained from the input values (A:150.00, B:60.00, C:15.00, D:30.00) of sample 2, which gave the lowest turbidity value, showed the most removal of pollution. The results obtained from the input values (A:250.00, B:60.00, C:7.00, D:20.00) of sample 30, which gave the highest turbidity value, showed the least removal of pollution. The results showed that increasing RPM and time of the centrifugation process significantly affected the removal of pollution in wastewater. [ABSTRACT FROM AUTHOR]