Search

[Display omitted] The rising global energy use in buildings, driven by climate change and economic expansion, is a major concern. In Algeria, the residential sector is a significant contributor, accounting for roughly 40 % of total energy consumption and 32 % of greenhouse gas emissions. This paper aims to Modeling and forecasting energy consumption in Algerian residential buildings. In this study, a bottom-up methodology was combined with Geographic Information System (GIS) analysis to quantify and project energy consumption patterns in Algerian residential buildings until 2100, as well as identify climate zones, which will help develop thermal standards. Commencing with the collection of pivotal data such as temperature and global horizontal irradiation (GHI), the research proceeds to ascertain the annual heating and cooling needs for residential houses across Algeria (at 906 uniformly dispersed spots) using the degree-days method. Besides, the energy consumption for other residential appliances, including lighting, refrigerators, and freezers are also evaluated. Utilizing a GIS software (ArcGIS 10.x), the obtained results for various building energy usage at 906 points are therefore interpolated to generate high resolution maps representing different regions in Algeria. The analysis predicts a significant rise in energy consumption from 47.54 TWh in 2022 to 74.4 TWh in 2100, underscoring the diverse energy requirements across nine identified climatic zones. Zone 5 emerges as the highest energy-consuming zone per household, attributed to its elevated Heating Degree Days (HDD) and Cooling Degree Days (CDD) values. Additionally, cooking emerges as the primary energy consumer nationally, accounting for 30.61 % of total consumption, with variations observed in the usage of appliances like air conditioners and fans, influenced by local climate conditions. Zones with high heating energy needs, such as Zone 5, could benefit from energy-efficient heating systems, while zones with substantial cooling energy requirements, like Zone 9, may require targeted cooling strategies. These findings emphasize the necessity of tailored energy policies to address the distinct demands of each climatic zone rather than setting standard strategies for all regions. Despite few limitations of this study, useful insights are gained that can aid policymakers and urban planners in crafting sustainable energy policies to address evolving residential energy demand in Algeria and beyond. [ABSTRACT FROM AUTHOR]

• Climate change and urban setting impact energy use of buildings. • Energy use is higher due to overlapping effect of climate change and microclimate. • A method is proposed to account for future and urban environment in thermal simulation. • The results can assist in sizing passive ventilation systems. Urban settings and climate change both impact on energy use and thermal comfort inside buildings. This paper first presents a study of changes in energy demand in residential buildings considering the overlapping effect of climate change and urban heat island intensity in two European locations; Cadiz (Spain) and London (United Kingdom), representing temperate and hot European climates and moderate and dense urban settings. Future-urban weather files were generated and simulations were run considering energy demand and indoor thermal comfort. In hot climate regions such as the one of Cadiz, future climate will increase the cooling demand and the additional impact of the UHI leads to a further increase of up to +28% of total energy demand compared to the current climate without considering urban effects. Future-urban weather conditions will be detrimental also for buildings in London, where the annual energy demand is predicted to increase by up to the 16% if future climate and urban effects are included. This is due to a higher increase in cooling demand compared to the reduction for the heating need. The paper also presents a method to take into account microclimatic conditions in naturally ventilated buildings, especially the effect of wind variations around the building which impacts natural ventilation rates. Air and surface temperature and wind speeds were studied using ENVImet and the resulting microclimatic conditions were used as inputs to the EnergyPlus Airflow Network model for the calculation of the building ventilation rates. It was found that ventilation rates are reduced (in comparison to meteorological weather files) and this reduction impacts negatively on internal operative temperatures. A thermal comfort analysis was carried out indicating that the selection of a suitable weather file and microclimatic conditions is essential for more accurate predictions of internal thermal comfort and will assist in the sizing of passive and active systems to avoid overheating. [ABSTRACT FROM AUTHOR]

• Overheating regulations and calculation methods in 26 European countries were compared. • Most of the existing calculation methods are outdated and do not fit climate-proof buildings. • France requires a mixed-mode operation of naturally ventilated households. • The UK developed a heatwave-based calculation approach. • Comfort-based, multi-zonal, and time-integrated calculation approaches are needed. With the ongoing significance of overheating calculations in the residential building sector, building codes such as the European Energy Performance of Building Directive (EPBD) are essential for harmonizing the indicators and performance thresholds. This paper investigates Europe's overheating calculation methods, indicators, and thresholds and evaluates their ability to address climate change and heat events. e study aims to identify the suitability of existing overheating calculation methods and propose recommendations for the EPBD. The study results provide a cross-sectional overview of twenty-six European countries. The most influential overheating calculation criteria are listed the best approaches are ranked. The paper provides a thorough comparative assessment and recommendations to align current calculations with climate-sensitive metrics. The results suggest a framework and key performance indicators that are comfort-based, multi-zonal, and time-integrated to calculate overheating and modify the EU's next building energy efficiency regulations. The results can help policymakers and building professionals to develop the next overheating calculation framework and approach for the future development of climate-proof and resilient residential buildings. [ABSTRACT FROM AUTHOR]

• Scientometric method is used to review the low carbon building research. • The knowledge base, knowledge domain and knowledge structure of low carbon building research are identified. • The predominant research areas and gaps in low carbon building research are confirmed. • The knowledge roadmap of low carbon building research is formulated. Due to global climate change, carbon reduction has become a critical issue for the construction industry. Low carbon building has been adopted as a strategic objective, and its implementation demonstrates the enormous potential of reducing carbon emissions. Despite much research, some important research areas or gaps have not been identified, while simultaneously, few studies describe the knowledge roadmap for low carbon building research necessary to guide scholars and practitioners. The purpose in this paper is to provide a comprehensive and objective analysis of research areas regarding low carbon building using the scientometrics method. A total of 378 low carbon building-related publications were reviewed. Based on the keyword co-word analysis, document co-citation analysis and clustering analysis, the results show that 100 research keywords, 3 research hotspots and 5 research domains are extremely important for the advancement of low carbon building. Based on the in-depth analysis of the findings, the knowledge structure with different prominences was developed, which grouped LCB research into five themes and various sub-topics. Significantly, this paper provides the knowledge roadmap needed to facilitate further research and applications for both academia and industry stakeholders to improve low carbon building. [ABSTRACT FROM AUTHOR]

Abstract The assessment of building energy performance through dynamic simulations has been increasing significantly in recent years since it represents a key strategy for the correct design of highly efficient buildings. Results of dynamic energy simulations are affected by many uncertainties, and its reliability depends on the accuracy of the input variables. One of the most influential variables is the climate surrounding the building, a reason why the use of accurate weather data files is essential, but experimental datasets are not always available. In this context, this paper analyses numerical weather datasets obtained from different regional climate models by comparing them with real data; in addition, it evaluates their impact on the energy performance of a historical building in Asunción through dynamic simulations. The database of five different weather data sources is compared with observed meteorological data in order to assess their accuracy through statistical analyses. Moreover, some methodologies to estimate diffused and direct components of the global solar radiation are evaluated, with the objective of solving the problem of missing direct and diffused solar data components from the meteorological codes. Subsequently, weather data files are generated to quantify the influence of measured/simulated meteorological data on the evaluation of building energy performance. The results obtained in this paper show that the simulated meteorological data agree very well with real observations for the year under study. Also, the simulations of the building energy performance delivered similar values to those obtained using the real weather dataset. Therefore, the regional climate models can represent a reliable tool for building energy performance assessment, and mainly for the calibration of building energy models when measured weather data is not available. [ABSTRACT FROM AUTHOR]

Abstract Over the last decade, building engineers have begun implementing sensible-latent de-coupled air-conditioning systems in non-residential buildings in hot-humid climates. Typically, a de-coupled system consists of a dedicated outdoor air sub-system for ventilation and high-temperature radiant cooling sub-system for space cooling. This approach has lowered cooling energy demands and fan energy consumption in buildings. However, the complete energy saving potential of de-coupled systems, specifically high-temperature space cooling sub-systems, can only be realized by using low-lift chillers that supply chilled water which matches the high-temperature radiant cooling application. This paper discusses the results of a retro-installation of a prototype modular low-lift chiller to provide high-temperature chilled water (at 17 °C) to the radiant cooling units. The paper presents temperature and cooling load profiles, control methodology and energy efficiency improvements of the low-lift cooling system. The paper also further discusses the influence of various parameters on the performance of the chiller. Despite having a cooling capacity of only 20 kW, the modular low-lift chiller is consistently able to achieve a Coefficient of Performance (COP) of 8. By operating at a low-lift (20 K) compared to a high-lift (29 K), the sensible cooling electrical consumption (at the chiller) is reduced by 23% despite being compared to a high-lift low-temperature chiller with 100 x higher cooling capacity. When normalized for cooling capacities, this reduction is between 29–30%. The project is the first known installation of low-lift cooling for building comfort control in hot-humid climates, and first reported publication of low-lift cooling in a real-life scenario - i.e., non-laboratory conditions or modelling exercise. [ABSTRACT FROM AUTHOR]

The growing awareness of climate change is constantly moving the attention of designers and policymakers from typical and current scenarios to future layouts. This new approach introduces a degree of uncertainty that should be accounted in the building design process. The multitude of possible scenarios suggests considering dynamic system that can adapt themselves to unpredicted operating conditions. The aim of this study is to test a new approach and a new flexibility metric analysing the behaviour of a high-performance dynamic internal curtain in current and future scenarios. The first part of the paper focuses on the optimization of the dynamic system in the current scenario; this preliminary analysis represents the traditional design approach and is considered the baseline for all the comparisons. Hence, defining a matrix of likely scenarios, this paper explores the behaviour of three different selected control strategies – always off (i.e., no curtain), fixed control, optimized control – in the different scenarios considering possible variations of i) climate, ii) urban context, iii) internal loads, and iv) building use. The main outcomes of the research are, on the one hand, the comparisons of the control strategies and the benefits of the dynamic system and, on the other hand, the definition of a new metric that can properly describe the flexibility of the building systems with reference to the future scenarios analysed. This metric is based on six classes – which describe the statistical distribution of the energy consumptions of all the scenarios simulated in the matrix – and an index called Energy Flexibility Index (EFI) that quantifies the flexibility of the technology considered. The case study analysed highlights how implementing a dynamic shading system, considering the same building use, can increase the EFI of nearly 21% for non-optimized control strategy and up to 23% when optimized. While changing the building use in residential reduces these values respectively, to 6% and 7%. [ABSTRACT FROM AUTHOR]

• Climate change's impact on retrofitting was tested on Le Corbusier's apartment. • Climate change scenarios project up to 70% increase in summer overheating. • Adaptive natural ventilation can reduce warm discomfort of 50–60%. • Adaptive setpoints can reduce total energy consumption of 20–30%. • Adaptive strategies are particularly favourable in historic buildings. Historic buildings, often exempt from retrofits to preserve originality, require retrofitting due to potential future climate-related indoor issues. For Modern Architecture constructions, there is a need to find solutions that help address the discomfort and heat losses caused by the extensive use of glazing. By analysing Le Corbusier's studio-apartment this paper aims to inspect: (i) Solutions for energy, Indoor Environmental Quality, and preservation; (ii) Climate change impact on them; (iii) Possible adaptation strategies to cope with climate change. Spectrally selective glazing reduced summer overheating by 15%; high-performance glazing lowers cold discomfort (24%) and heating (22%) but increased warm discomfort; shadings maintained energy use and reduced summer discomfort by up to 44%; thermal insulation can reduce winter discomfort and halves energy use but raised summer discomfort by up to 41%. Tests on 2050–2100 climate change scenarios reveal up to 70% more warm discomfort hours. Adaptive strategies can help, with natural ventilation cutting warm discomfort by 50–60%, and adaptive setpoints reducing cooling demand by about 35%. Adaptive strategies can complement traditional retrofitting in addressing current and future climate conditions, especially in historic buildings that require minimal interventions to preserve their historical characteristics and enhance resilience. [ABSTRACT FROM AUTHOR]

This paper presents the building stock model CESAR (Combined Energy Simulation And Retrofitting), which is based on bottom-up modelling methodology for the development of sustainable energy transformation strategies for the buildings in Swiss districts. CESAR is composed of two sub-models: a Demand Model (DM) and a Retrofitting Model (RM). The DM is tasked with identifying the current energy demand of buildings in districts. It builds on geo-referenced information and available census data, and its flexibility allows it to be applicable to any kind of residential neighbourhood within Switzerland. The DM is based on an automated bottom-up modelling technique, which employs the dynamic building energy simulation software tool EnergyPlus as its simulation core to generate hourly energy demand profiles of individual buildings taking the interactions with neighbouring buildings (e.g. shading and solar inter-reflections) into account. Once current energy demands are calculated by the DM, the RM further offers the possibility to apply a set of energy transformation scenarios, based on the Swiss Energy Strategy 2050, to generate future demand and emission projections of districts including key economic indicators. Besides that, the building energy performance under climate change projections can be evaluated. In this paper, the tool is applied on three case study districts, an urban, suburban and rural area, within Switzerland and different transformation scenarios according to the Energy Strategy are investigated. Results revealed significant differences between the two implemented transformation scenarios, the Business as Usual (WWB) and the New Energy Policy (NEP). While in the WWB scenario, only a small number of buildings reaches the intended targets for primary energy and GHG emissions until 2050, the NEP scenario induces a much higher transformation of the districts. Besides that, the significance of the impact of global warming on future cooling demand is shown. [ABSTRACT FROM AUTHOR]

In the face of a changing climate, a growing number of construction firms are adopting carbon reduction targets on individual projects and across their portfolios. In the wake of the Paris Agreement, some firms are seeking a means of aligning their targets with sectoral, national and international mitigation commitments. There are numerous ways by which such an alignment can be achieved, each requiring different assumptions. Using data from the UK construction industry, this paper reviews current company commitments and progress in carbon mitigation; analyses the unique challenges in aligning construction targets, and presents a series of possible sectoral decarbonisation trajectories. The results highlight the disparity between current company targets and the range of possible trajectories. It is clear that a cross-industry dialogue is urgently required to establish an appropriate response that delivers both a widely-accepted target trajectory and a plan for its delivery. This paper is intended to stimulate and support this necessary debate by illustrating the impact of different methodological assumptions and highlighting the critical features of an appropriate response. [ABSTRACT FROM AUTHOR]

This paper describes a method for residential water use modeling predicated on metered energy data. Actual measured hot water volumes for major indoor consumption are used to verify and adjust the outputs in gallons of hot water consumption based on climate variables, water heater technical features, and set-point and intake temperatures. Three independent datasets for residential energy (RECS 2009), water heater efficiency (Air-conditioning, Heating and Refrigeration Institute-AHRI), and end-use domestic water (Residential End Uses of Water, Version 2-REU II) are applied to identify specific demographic, built environment and geographic factors that relate patterns of energy demand to water consumption. The proposed model acts within the broader Integrated Urban Metabolism Analysis Tool (IUMAT), a system-based analytical framework for evaluating the environmental performance of the built environment. The method described in this paper offers an alternative approach to residential water consumption modeling by implementing volume of hot water consumption as a proxy for indoor water use. It provides utilities with the potential to parse and prioritize energy and water conservation measures. [ABSTRACT FROM AUTHOR]

The urban heat island (UHI) phenomenon has become a concern in many major cities worldwide, as high summer temperatures and poor wind flow can have negative impacts on city dwellers, particularly increasing energy demand for artificial cooling. This paper showcases how an Integrated Multi-scale Environmental Urban Model (IMEUM) can be employed to support planners, architects and engineers to assess the combined impacts of the UHI phenomenon and rising global temperatures due to climate change. IMEUM concept derives from downscaling environmental models from global scale (25 km) to mesoscale (1 km) and city scale (100 m). Hence, this paper showcases a computationally efficient method which couples multi-scale atmospheric models with statistical model to estimate weather parameters. Developed under Singapore context, IMEUM can be utilized to incorporate appropriate UHI mitigation measures upfront in design process, consecutively bridging the gap between global and building scale. This paper also includes calibration of the IMEUM output using observations from ground sensors. Furthermore, by using case study of a hypothetical office building, this paper showcases how the IMEUM output can be fully converted into a localized weather data file for cooling load simulation. IMEUM is currently being developed further into integrated quantitative urban environment simulation tool (QUEST), which can be used to test the immediate microclimatic impact of development plans and assess their long term impacts under future climate change scenarios. [ABSTRACT FROM AUTHOR]

The paper presents an energy simulation-based study to investigate the impacts of climate change on energy consumptions of an office building located in five different cities, United States. Annual energy consumption of a medium-size office building was predicted by building energy simulation software—EnergyPlus using TMY3 weather data and future climate data. In this study, we have used two sets of further climate data with different climate models including (1) Hadley Centre Coupled Model, version 3 (HadCM3), and (2) NCAR Community Earth System Model version 1 (CESM1) with the Community Atmosphere Model version 5 (CAM5). A morphing method was applied to downscale the monthly weather forecast to hourly forecast for use in building energy simulation for the two General Circulation Models (GCMs): HadCM3 and CESM1. Using the generated future weather files, HVAC operation related mitigation measures including adjustment of thermostat setpoints, reduced HVAC operation hours, reduced VAV box minimum flow setting, and mixed-mode ventilation were simulated to compare with ASHRAE Standard 90.1 baseline simulated using TMY3 weather data. Simulation results on predicted whole building, heating and cooling energy consumptions were examined. The paper highlighted the importance of efficiently operating mechanical systems in buildings to ensure a more sustainable future. [ABSTRACT FROM AUTHOR]

Urban climate change phenomena, exacerbated by increasingly frequent heat waves, represent an urgent environmental research issue to be further investigated and counteracted through multidisciplinary approaches covering both engineering and socio-environmental sciences. After acknowledging that Urban Heat Island hugely affects building thermal-energy behavior, recent contributions deal with its effect on vulnerable population groups in terms of their exposure risk to health diseases even worsened by energy poverty. In this view, the paper investigates the role played by occupants’ education and their knowledge of environmental risks and climate change-related events, by exploring the opportunity to improve their information level as trigger for improving their climate change behavioral resilience and reducing their health risk in the built environment during extreme events. To this aim, a novel widespread questionnaire was elaborated and submitted to more than 300 individuals with varying their educational background and personal characteristics, seasonal period, submission mode, temporal closeness to heat wave emergency. Key findings showed that participants’ educational background represents a clear way to drive environmentally aware behaviors minimizing the consequent health risk imputable to urban overheating and other environmental hazards such as heat waves. In fact, a higher level of awareness and consciousness may lead to a better adaptation capability to such climate change related hazards since they tend to implement conscious and resilient behavioral attitudes to minimize their indoor thermal stress at home (0.8 versus 1.4 points awareness level about mitigation strategies). Therefore, this paper demonstrated that informative campaigns may represent an effective strategy for making building occupants more resilient to climate change toward dedicated environmental management solutions and policies taking advantage of educational vehicles. [ABSTRACT FROM AUTHOR]

The energy consumption necessary to maintain thermal comfort in buildings remains a significant and partially unjustified part, accounting for about 30–40% of the total energy consumption. Despite the increasingly pressing regulations in the energy sector (EPBD recast), the quality of the internal environment remains one of the critical parameters on which to pay more attention in view of a consistent evaluation of the Nzeb building. The windowed components are often designed with thermal insulation performances higher than the minimum requirements but still they lack in design of the incident solar radiation control, which is a particularly delicate topic for indoor comfort and more generally for a higher energy efficiency in buildings. If we think of the numerous variables of influence (typology, orientation, geographical location, etc.), the possibilities to associate energy saving, lighting control and users' comfort are inevitably entrusted to dynamic systems integrated into the glass. In this paper authors present the results related to the experimental characterization of two identical test rooms with different typologies of windows. One room is furnished with a traditional high thermal performance glass and the other, with an electrochromic glass suitably controlled by remote. The operative temperature measured in both test rooms have been utilized to verify the simulation model developed to assess the energy saving achievable in a Mediterranean climate, taking properly into account the hourly variations of the climate and the actions on the shading regulation systems. [ABSTRACT FROM AUTHOR]

The paper aims to achieve the modelling of climate change effects on heating and cooling in the building sector, through the use of the available Intergovernmental Panel on Climate Change forecasted data. Data from several different climate models will be fused with regards to mean air temperature, wind speed and horizontal solar radiation. Several climatic models data were analysed ranging from January 2006 to December 2100. Rather than considering each model in isolation, we propose a data fusion approach for providing a robust combined model for morphing an existing weather data file. The final aim is simulating future energy use for heating and cooling of a reference building as a consequence of the expected climate changes. We compare results, in terms of robustness to overfitting, for two different fusion methodologies, based on the comparison between errors on punctual historical data or prediction models that can be obtained by each climate simulator and by the actual ERA-INTERIM data set. Finally, we map the new aggregated data into a prediction trace of heating and cooling energy requirements. The expected energy demand is in the range of the one provided by single climate models, with a variability that reaches up to the 10% of the overall energy requirements. The approach proposed is an advancement as it allows to achieve better fits with existing re-analysis data if compared to specific global circulation models output data. Thus a more reliable estimation of energy use for heating and cooling can be achieved. [ABSTRACT FROM AUTHOR]

• Develop a multistep approach for hygrothermal assessment of a hybrid facade system; • Build climate files for hygrothermal simulations using hourly measured weather data; • Develop a user-independent code to find and fill the weather data gaps; • The hybrid facade system has an appropriate performance under normal conditions; This paper describes a multistep approach that allows the design and assessment a hybrid, timber-based, facade system that can withstand current real conditions without being prone to mould. This approach is aligned with today's drive for a more sustainable built environment. A typical office building with the hybrid system was simulated in a BES tool to obtain the indoor conditions in three selected locations in Norway. Historic measured weather data were used to build climate files, in accordance with ISO 15927-4 methodology. The global radiation was split using the DIRINT model, while a user-independent code was developed to find and fill the weather datasets gaps. A model was built using a one-dimensional HAM software for each facade section to assess its hygrothermal performance, whose studies are scarce in literature, and determine whether the system is appropriate for Nordic climate. This analysis included mould growth risk assessment, determining the variance of the transient U-values and the influence of the wood surface treatment on the drying capacity of the facade. The obtained energy consumptions are in accordance with the current Norwegian regulations. Under normal conditions, the system works properly. However, problems arise if a higher initial moisture content exists in the materials. [ABSTRACT FROM AUTHOR]

[Display omitted] • Transform office buildings towards whole-life minimum carbon. • Integrated optimisation of retrofitting plan and operating schedules. • 44%, 74% and 68% decline in whole-life costs, carbon and energy after retrofitting. • 4–51% saving in whole-life carbon emission compared to design optimisation strategy. • 10% saving in whole-life carbon emission compared to operating optimisation strategy. The state-of-the-art retrofitting strategies generally use either passive or active measures to reduce carbon emissions during its operating stage. The coordination among a range of passive and active energy devices is not considered while the concept of whole-life carbon emission minimisation is not introduced. To overcome these three research gaps and to transform existing office buildings toward minimum whole-life carbon emissions, an integrated passive and active retrofitting approach is proposed. Through two inter-related design optimisation and operating optimisation processes, the set of retrofitting options can be identified to achieve overall optimal economic, energy, and environmental performance. The first research gap, lack of simultaneous consideration of various active and passive retrofitting measures, is solved by the whole system simulation of a range of active and passive refurbishment measures. The second research gap, lack of coordination among a range of active energy devices, is solved by iteratively determining the optimal operating schedules of active energy devices with overall retrofitting plan at the design stage. The third research gap, lack of whole-life carbon emission minimisation, is solved by simultaneously minimising both embodied and operating carbon emissions. A real three-floor office building acquiring retrofitting is used to test the effectiveness of this integrated passive and active retrofitting approach. Compared to the building at its current status, there could be 44%, 74% and 68% reduction in lifelong costs, carbon emissions and energy usages if the proposed retrofitting strategy is adopted. Compared to retrofitting the building using the state-of-the-art "design optimisation only" strategy, the proposed retrofitting approach can reduce 5.36%-34.37% whole-life energy consumption and 4.31%-51.10% carbon emissions. Compared to retrofitting the building using the state-of-the-art "operating carbon emission only" strategy, there is 11.92%, 10.55%, and 10.48% reduction in whole-life cost, energy usage and carbon emissions, respectively. Therefore, this paper is innovative in an aspect that minimum whole-life carbon emissions can be reached through integrated design of passive and active retrofitting measures. It can provide building owners, energy engineers and decision-makers with insightful building retrofitting solutions to tackle the energy crisis and climate change problems. This proposed retrofitting approach can also be modified to provide guidance in designing new low-carbon buildings. [ABSTRACT FROM AUTHOR]

Rooftops Photovoltaic systems present a feasible choice to mitigate the adverse effects of electricity costs and climate crisis. Different parameters have been defined to analyse this type of systems from monitored data. However, they only focus on the matching capability between the load and AC generation profiles together with the utility grid usage. Therefore, they do not consider the performance of the PV generator and the rest of components of the photovoltaic system. Moreover, although IEC-61724 standard defines common criteria to assess the performance of photovoltaic systems, this standard does not consider calculated parameters and yields adapted to the idiosyncrasy of Rooftops Photovoltaic systems. Thus, in this paper it will be provided new calculated parameters and yields (i.e. a self-consumption yield and a to grid yield) and performance ratios (i.e. self-consumption Performance Ratio together with a to grid Performance Ratio) which combine self-consumption with system performance providing a proper analysis from monitored data. Moreover, they may facilitate comparisons between installations with different array power. These new parameters may not only help to ensure that design objectives have been achieved but they may better assess the potential of this technology which are key issues for the deployment of this type of facilities. [ABSTRACT FROM AUTHOR]

• Incidence of windows design on energy and visual comfort is studied under climate change. • The case study is an office building located in representative European climates. • Triple low-emissive windows, in oceanic and continental climates achieves energy saving of −35 %. • Double selective windows assures savings from −27 % to −57 % in the warm and oceanic climate. • The primary energy will increase until 27 % in for warn climates considering the 2080 scenario. The design of the glazed elements of the building envelope is a critical issue for both new and refurbished building when the effect of climate changes and expected overheating conditions are considered. Indeed, the windows affect the building energy balance and also the natural lighting that impacts both on visual comfort and illuminance consumptions. This paper develops a methodological approach for performing a parametric analysis aimed at quantifying the effects of different window's designs on the total primary energy and visual comfort of an office in the most representative European climatic zones. The considered parameters are: windows' orientation, window to wall ratio, glass and frame type and the installation of shading system. A new approach for evaluating the resilience of the optimal solution selected for the current climates is introduced by taking into account medium and long-term emissions scenarios. This analysis suggests that in the warm-summer humid continental climate, a double selective window may be resilient. Indeed, in the worst emission scenario, the achievable annual energy saving will be around −26 % if compared with a clear double window. Meanwhile it will be lower than −10 % if compared with the same optimal solution but simulated in the short-term emission scenario. For the humid subtropical climates and hot-summer Mediterranean climates, the scientific community should be focused the development of new solutions because also a dynamic system as the electrochromic one, is not able to guaranteed energy saving in the future scenario. Indeed, also the optimal configuration selected under the current conditions would be characterized by higher primary energy request (between 16 % and 27 %) under the future emissions scenarios. [ABSTRACT FROM AUTHOR]

Extensive research works have been carried out over the past few decades in the development of simulation tools to predict the thermal performance of buildings. These validated tools have been used in the design of the building and its components. However, limited simulation tools have been developed for modeling of district energy systems, which can potentially be a very laborious and time-consuming process. Besides many associated limitations, providing a realistic demand profile of the district energy systems is not a straightforward task due to high number of parameters involved in predicting a detail demand profile. This paper reports the development of a simplified model for predicting the thermal demand profile of a district heating system. The paper describes the method used to develop two types of simplified models to predict the thermal load of a variety of buildings (residential, office, attached, detached, etc.). The predictions were also compared with those made by the detailed simulation models. The simplified model was then utilized to predict the energy demand of a variety of districts types (residential, commercial or mix), and its prediction accuracy was compared with those made by detailed model: good agreement was observed between the results. [ABSTRACT FROM AUTHOR]

This paper investigates the potential for incorporation of human commercial building design modelling into the pig production industry. During the last decades pig building design has relied heavily on building manufacturers compared to human commercial buildings that regulate standards to improve the sustainability of the building. Thus, the aim of this paper was to gain a greater understanding of the design requirements for sustainable forms of pig housing, which could potentially improve the welfare of the pig and promote greater resource use efficiency. Part of an existing mechanically ventilated UK pig production building, which represents three adjacent fully-slatted units each capable of holding approximately 292 pigs and measuring approximately 18 m x 14m, was used as a basis to create a dynamic thermal model of the building. The model takes into account the possibility of future rises in environmental temperature and the effect of this climate change on building performance and pig growth, feed efficiency and welfare. The results of the model showed that as the finishing pigs increased in size they have the potential to be subject to increasingly poor indoor air quality, during the winter months. The model also shows that improving the thermal properties of the building not only helps with reducing the amount of time that the pigs could potentially spend at extreme low temperatures, by approximately 1115 h (46 days), but can also help with reducing the number of hours the pigs spend above 26 °C during the summer months, by approximately 8 h. [ABSTRACT FROM AUTHOR]

• Globally, population weighting substantially changes degree-days rate of change. • Choice of base temperature strongly influences degree-day calculation. • For typical base temperatures, heating degree-days are falling at twice the rate that cooling degree days are increasing. • Within countries, heterogeneity in population changes determines relative changes in heating and cooling degree-days. Anthropogenic greenhouse gas emissions are driving global increases in temperature. This rise will likely lead to an increase in demand for cooling in the coming years. However, increasing temperatures are not the main explanatory factor for why the world is moving towards more cooling. This paper compares population and area-weighted cooling and heating degree-days derived using ERA5-Land reanalysis temperature, to show that population growth in warmer parts of the world drives cooling demand globally. The analysis shows that mean global area-weighted heating degree-days have fallen 8.46 °C days/year, whereas population-weighted heating degree-days have fallen by 12.5 °C days/year. At the same time, mean global area-weighted cooling degree-days have risen by 3.0 °C days/year, while population-weighted cooling degree-days have risen at 6.0 °C days/year. By using sub-country analysis, this paper shows that population-weighted degree-days can substantially differ from area-weighted degree-days. Finally, the findings highlight that the choice of heating and cooling degree-day base temperature is the most important parameter in the variability of degree-days and will need to be understood better in order to accurately account for future heating and cooling energy demand. [ABSTRACT FROM AUTHOR]

The current study uses a new methodology where the assessment of building cooling demand savings is obtained through a redefined concept of the Climatic Cooling Potential (CCP). This concept allows for the direct estimation of energy savings in buildings by the use of different passive cooling systems at a large spatiotemporal scale. In this paper, we apply this method to assess the impact of climate change on the future potential of Direct Ventilation and Evaporative Cooling. To do so, a set of high resolution climate simulations for the Iberian Peninsula for present and future climate, performed using the Weather Research and Forecasting model (WRF), were used. Three passive cooling simulations were conducted: the first one employs the hindcast simulation where WRF is forced by the reanalysis ERA-Interim for the 1989–1999 period (hindcast); the second employs the EC-EARTH forced historical run ranging from 1970 to 2000 (historical) and the third also forced EC-EARTH but for 2070–2100 (future). An eleven-year period was extracted from the historical run and validated against the first, the hindcast. The similitude of the results provided confidence on the ability of the EC-EARTH forced runs to correctly simulate climate and thus allowing the assessment of the effect of climate change in the outcome of the passive systems and cooling demand savings in buildings. The results show that the CCP conserves its spatial heterogeneity for both historical and future, but presents lower values for the future due to the increase in temperatures. Nevertheless, this reduction is mostly below 20% over the entire Iberian Peninsula along the annual cycle, for both Direct Ventilation and Evaporative Cooling. This means that even in the context of a changing climate, these kind of systems can still offer valuable reductions on the cooling demand of buildings. Furthermore, most of the reductions in the CCP, caused by the increase in temperatures, can be surpassed by increasing the flow rate or can even be compensated by the increase in Cooling Demand as a consequence of the rising temperatures. [ABSTRACT FROM AUTHOR]

Highlights • The aim of this research is to investigate the thermal performance of the prototype building to assess overheating in the summer, particularly the long-term heatwave period in the UK. • To understand the impact of energy efficient technologies on occupants' wellbeing and health in order to identify occupants' thermal comfort level in these types of dwellings. • The study adopts a quantitative research design based on indoor monitoring, in-situ measurements and dynamic simulation modelling. • This clearly indicates that due to this prototype house's structural construction material behaviour in a heatwave and its location (southwest facing orientation), it is susceptible to very high overheating risk. • The results found from the monitoring during a long-term heatwave in the summer of 2018 provided strong evidence for overheating and thereby thermal discomfort in many occupied spaces, particularly on the first floor followed by several spaces on the ground floor. Meanwhile, all the occupied spaces appeared to be well above the acceptable thermal comfort benchmark throughout the data collection period. • To calibrate the building performance, as well as the building materials and components adopted in the model, the measured indoor environment data were scrutinised in conjunction with the IES simulation results. Abstract There is growing evidence that terraced houses—thermally lightweight, well insulated, naturally ventilated with three exposed wall surfaces—are at risk of overheating, especially in south-eastern England. The aim of this study is to evaluate the building performance and develop a reliable building simulation, which will be employed in the second phase of the study: developing affordable and feasible passive design strategies to support the energy-efficient building systems of the construction industry. This paper reports on the results from the first phase of the study where a quantitative methodology, including indoor and outdoor environmental monitoring, in-situ measurements and building simulation modelling, was adopted. The performance of a case study was modelled and simulated via employing Integrated Environmental Solutions (IES) software suite. The results from the base-case were analysed according to the adaptive thermal comfort of Chartered Institution of Building Services Engineers (CIBSE) Technical Memorandum 52 guidelines: The Limits of Thermal Comfort—Avoiding Overheating in European Buildings. The spaces studied within the case study house were observed to exceed the acceptable limits of thermal comfort; particularly, the large bedroom within this zone exceeded the upper limit for overheating up to 11 h daily. Furthermore, the results from the monitoring study indicate a high risk of summertime overheating across all the case study settings, especially during short-term peaks in outdoor temperatures. The main reasons for the problematic thermal performance were identified as well-insulated and fully air-tight building fabric, the lack of sufficient ventilation through the living spaces and excessive heat gains through the composite cladding material. [ABSTRACT FROM AUTHOR]

Abstract This paper addresses the question of identifying the time-window in short-term past from which the information regarding the future occupant's window opening actions and resulting window states in buildings can be predicted. The addressed sequence duration was in the range between 30 and 240 time-steps of indoor climate data, where the applied temporal discretization was one minute. For that purpose, a deep neural network is trained to predict the window states, where the input sequence duration is handled as an additional hyperparameter. Eventually, the relationship between the prediction accuracy and the time lag of the predicted window state in future is analyzed. The results pointed out, that the optimal predictive performance was achieved for the case where 60 time-steps of the indoor climate data were used as input. Additionally, the results showed that very long sequences (120–240 time-steps) could be addressed efficiently, given the right hyperprameters. Hence, the use of the memory over previous hours of high resolution indoor climate data did not improve the predictive performance, when compared to the case where 30/60 min indoor sequences were used. The analysis of the prediction accuracy in the form of F1 score for the different time lag of future window states dropped from 0.51 to 0.27, when shifting the prediction target from 10 to 60 min in future. [ABSTRACT FROM AUTHOR]

Highlight • A method is proposed to determine the potential limitations of free cooling. • The method links heat related health risks and thermal comfort. • A gap exists between thermal comfort and heat stress ergonomic standard indices. • A same temperature scale from thermal comfort to heat stress thresholds is proposed. • Thermal stress thresholds should be adjusted to heat acclimatisation of people. Abstract Heatwaves are responsible for many deaths due to hot weather. Natural ventilation is promoted as a cooling solution to reduce the impacts of climate change because of its energy-saving potential. This paper addresses the prediction of heat-related health risk situations in naturally ventilated dwellings, where indoor thermal conditions depend on external climate and occupant behaviour. Thus, the operating limits of a dwelling vary according to its dynamic thermal response to indoor and outdoor stresses. To secure a building design, a method to improve the prediction of heat-related health risks is proposed that links predicted percentage dissatisfied (PPD) and wet-bulb globe temperature (WBGT) indicators to distinguish a moderately warm situation from a heat stress situation (WBGT > 29 °C). Simulations are performed for a dwelling during the 2015 heatwave in Paris (France) to test the method. In the example, natural ventilation was found to reduce the indoor temperature, but there remains ambiguity regarding the ability of natural ventilation to provide moderate conditions. According to the scope of the ergonomic standards, "moderate thermal environment" and "heat stress" temperature ranges are not contiguous. Bridging of this gap requires establishing thermal comfort ranges and heat stress thresholds adapted to people according to their acclimatisation level and their sensitivity to heat. [ABSTRACT FROM AUTHOR]

Cooling demands of commercial buildings present a relevant challenge for a sustainable future. They account for over half of the overall energy needs for the operation of an average office building in warm climates, and this situation is expected to become more pressing due to increasing temperatures in cities worldwide. To tackle this issue, it is widely agreed that the application of passive strategies should be the first step in the design of energy efficient buildings, only using active equipment if it is truly necessary. Nonetheless, there is still further need for information regarding the potential limits derived from their application. This paper explores the effectiveness of selected passive cooling strategies in commercial buildings from warm climates, defining performance ranges based on the assessment of multiple scenarios and climate contexts. This task was conducted through the statistical analysis of results from documented research experiences, to define overall ranges and boundary conditions; and through software simulation of selected parameters to isolate their impact under a controlled experimental setup. General findings showed that the mere application of passive strategies is not enough to guarantee relevant savings. Their effectiveness was conditioned to both the harshness of a given climate and different building parameters. Specific recommendations were also discussed for the selected passive strategies considered in the evaluation. [ABSTRACT FROM AUTHOR]

Over the last few years, studies have predicted an increase in the overall air temperature due to climate change. Today's society is already sensing this change, which could have a negative impact on the environment and efforts are being made to seek all possible measures to curb it. One of the consequences of this temperature rise would be its effect on indoor comfort within buildings, which may cause higher energy consumption and operational costs, while reducing the useful lifetime of air-conditioning equipment. In this paper, an existing zero energy building (ZEB) is being studied to understand the possible effects of climate change on its zero energy status. The building is also a zero carbon building because all of its generated energies come from renewable sources (biomass, geothermal and solar photovoltaic systems). The building LUCIA has the highest innovative technologies in energy systems, design and construction elements and is currently considered as one of the top three buildings with the highest LEED certification in the world. According to current European regulations, buildings will tend to become self-sufficient in terms of energy after 2020, and therefore this study will help us to understand the changes in energy consumption within a long-term timeframe, for such zero-energy buildings. With the aid of the Design Builder version 5 software and its EnergyPlus building energy engine, a building model is simulated and energy consumption is analyzed for the years 2020, 2050 and 2080 timeframe. The climatic conditions pertain to the city of Valladolid, Spain, which has a continental climate, while the expected changes in climatic conditions have been produced through the methodology developed by the University of Southampton, called CCworldweathergen. Results have shown that the cooling demand would significantly increase for the years 2050 and 2080, while space heating would drop. This will increase the overall demand for burning more biofuels to cover the added demand in absorption cooling systems. Moreover, the previously excess generated electricity of the building by photovoltaics would then be totally consumed within the building due to increased demand. This implies that the installed systems will operate for longer hours, which will increase maintenance and replacement costs. As a result of this study, it becomes possible to quantify the expected changes in energy consumption and prepare preventive actions to anticipate this change, while improving the management and control of both the energy systems and the building. [ABSTRACT FROM AUTHOR]

This paper investigates the climate change impact on cooling energy consumption of office buildings in four major architectural climate zones in China. The results show that there are apparent differences in the responses of monthly or yearly cooling loads to climatic change in different climates. Dominant factors affecting monthly cooling loads change from dry bulb temperature (DBT) to wet bulb temperature (WBT) with the climate zones changing from severe cold to hot. The yearly cooling load was mainly afftectd by DBT in severe cold climate, whereas the WBT had the dominant effect in the other climates. With the continuous warming climate, the yearly cooling load did not rise significantly for any climate zone except for severe cold climate zone where cooling load had a significant increase ( p  < 0.01). More importantly, the cooling load showed a weak decrease in Guangzhou. These results suggest that different measurements for buildings cooling energy conservation should be made in different climate zones. The humidity effect should be fully considered to improve buildings energy efficiency, especially in the hot climate zones. The continuous increase of temperature in the future does not necessarily increase cooling loads of buildings in the cold, hot summer & cold winter and hot summer & warm winter climate zones, and change trendency of humidity in the future need to be considered to predict cooling energy consumption. [ABSTRACT FROM AUTHOR]

The paper provides an overview of a part of research related to the analysis of information technologies and measures for improving the energy efficiency in urban planning that can contribute to mitigating the impact of climate change. The first part of the paper deals with problems supported by the numerous data on negative effects of climate change on the cities, such as urban heat islands, energy and ecological crisis. The second part of the paper proposes solutions that rely on information technologies which facilitate process of urban planning. Two projects related to the implementation of measures for improving the energy efficiency in urban planning were conducted within this research. The first one is considering the design of a spa centre in an undeveloped mountain landscape and the second one is dealing with reconstruction of a residential block in urban built environment. In the first case study, the proposed solutions rely on the information technologies, while in the second case study they rely on the implementation of measures for improving the energy efficiency in urban planning. The results show that the application of different measures in urban planning depends on the level of the built environment. [ABSTRACT FROM AUTHOR]

The paper introduces a novel method for risk assessment and preventive conservation of organic hygroscopic cultural heritage objects. The method is based on the analysis of the historic climate that is established in the European Standard EN 15757:2010. This new approach enables interpreting visible damage and assessing cause–effect relationships and it finds practical application in improving conservation strategies for real life buildings and objects. The paper investigates how it may be advantageous to reconstruct the historic climate back in time to obtain sound information about the target relative humidity (RH) level and the domain of RH fluctuations that can be considered safe for conservation. The method was applied to an inlaid wooden choir in the basilica of S. Giustina, Padua, Italy. The past indoor climate has been reconstructed over the whole life of the object, built in 1477, with documentary proxy data, instrumental readings and building simulation. Winter has been found to be the most critical season for the mechanical stress and wood yield. For the future, the indoor climate has been simulated until 2100 to timely devise preventive conservation measures to reduce the risk induced by climate change. Finally an evaluation of uncertainties has been considered. [ABSTRACT FROM AUTHOR]

The selection of a thermal comfort model for establishing indoor optimal hygrothermal conditions during the hot period has a major impact on energy consumption of Net Zero Energy Buildings in hot climates. The objective of this paper is to compare the influence of using different thermal comfort models for zero energy buildings in hot climates. The paper compares the impact of applying Fanger's model, Givoni's model, the ASHRAE 55 adaptive comfort model and the EN 15251 adaptive comfort model on energy consumption and comfort performance. Using both the building performance simulation tools ZEBO and EnergyPlus for energy simulation, an existing prototype of a residential apartment module is used to evaluate energy performance and thermal comfort in two parametric series. The first one is the result of coupling natural ventilation and mechanical cooling and the second one is guided coupling natural ventilation, mechanical cooling and ceiling fans. This study shows that the percentage of energy consumption difference meeting the comfort criteria according to ISO 7730 in comparison to EN 15251, ASHRAE 55 or Givoni's model varied up to 16%, 21% and 24.7%, respectively for the presented case study. More energy savings can be expected for buildings in hot climates with greater cooling demands. [ABSTRACT FROM AUTHOR]

• A innovative and efficient model was proposed for multi-lane highway. • The learning was collected a lot of existed pavement segments and built a large-scale highway network. • The LCA and LCCA was integrated to assess the sustainability of the M&R decision. • GDE3 performs well in selecting more cost-effective M&R optimization. A pavement maintenance and rehabilitation decision-making model plays a significant role in the sustainable development of highway networks. However, various maintenance and rehabilitation models lack the capacity to provide multi-objective maintenance decision-making strategies, which are solely concerned with reducing maintenance costs. This study aims to propose a multi-objective maintenance decision-making model, called the Pavement Maintenance-Generalized Differential Evolution 3 (called PM-GDE3), by integrating the pavement condition indices and the generalized differential evolution 3 (GDE3) method. Economic aspect, pavement sustainability, and environmental dimensions were considered in the proposed model to increase the flexibility of pavement management. In this study, the widely-used PAVER maintenance system,which represents a conventional M&R decision-making model and the PM-GDE3 model were applied to estimate the optimal maintenance and rehabilitation schedules for the highway networks, and the results from these models were compared. The results show that the maintenance strategy obtained from the PM-GDE3 model maintains the highway in an acceptable condition. In addition, it has been found that the PM-GDE3 model saves 30.9% of maintenance expenses, about 169 million CNY, 16.9% of carbon emissions, around 4,469 kt, and 11.6% of energy consumption, 2.8GJ, for as long as 30 service years compared to the PAVER model. The PM-GDE3 model outperforms the widely used PAVER maintenance system due to its capacity to propose the optimal solution by establishing a real-time simulation with numerous pavement conditions after maintenance application. This field is the first attempt to combine pavement performance prediction model, life cycle assessment method and life cycle cost assessment. The achievements of the paper are expected to combat the impending energy crisis and climate change impacts of pavement maintenance and rehabilitation. [ABSTRACT FROM AUTHOR]

• Analyzed residents' thermal demand characteristics under the global climate change. • A new thermal comfort evaluation model of traditional dwellings was established. • The new thermal neutral temperature and comfort range of residents were proposed. • Different measures to improve the old and new types of dwellings were put forward. Global climate change has led to increased differences in the indoor thermal environment of traditional dwellings and residents' thermal adaptability, but quantitative research in this area needs to be updated and improved. In this paper, taking the old and new types of traditional dwellings of Guangfu Ancient City in Hebei province, China as the example, we first investigated the current situation of indoor thermal environment and thermal comfort characteristics of residents by means of subjective questionnaire survey and objective data measurement. The measured data showed that the average indoor temperature of old-type traditional dwellings in winter was far lower than the thermal comfort range of human body, and it was also higher than the relevant standard in summer. Secondly, we established a new thermal comfort evaluation model of traditional dwellings and proposed a new thermal neutral temperature of residents: old-type traditional dwellings (18.1 °C in winter and 27.1 °C in summer), new-type traditional dwellings (19.8 °C in winter and 25.7 °C in summer). Although the measured data showed that the thermal environment quality of the old-type traditional dwellings was poor, the residents had strong thermal adaptability. Finally, we put forward the different living performance improvement strategies of old and new types of traditional dwellings: The old-type traditional dwellings should focus on strengthening the thermal performance of the envelope structure, while the new-type traditional dwellings should solve the problem of low indoor humidity in winter. This research improves the evaluation system of human thermal comfort of dwellings in cold region of China, and provides a good case reference. [ABSTRACT FROM AUTHOR]

• Genetic Algorithm (GA) based on Non-dominated Sorting Genetic Algorithm 2 (NSGA2) method is used for optimization. • Building optimization using passive design strategies can reduce final HVAC energy use 32% • Building optimization using passive design strategies can reduce time-integrated discomfort 46% • Overheating in nearly Zero Energy Buildings will be aggravated with continuation of global warming. • Building thermal comfort optimization does not ensure overheating mitigation during unprecedented events. It is expected that heatwaves will strike more frequently and with higher temperatures with the continuation of global warming. More extreme heatwaves concurrent with disruptions in the cooling system can lead to significant overheating problems in buildings affecting occupants' health, productivity, and comfort. This paper projects current and future heatwaves on an optimized nearly Zero-Energy terraced dwelling in Brussels, assuming the outage of the cooling system. Initially, a multi-objective optimization is performed considering 13 passive design strategies using the Genetic Algorithm (GA) based on the Non-dominated Sorting Genetic Algorithm 2 (NSGA-II) method. It is found that high ventilation rate, low infiltration rate, high insulation, high thermal mass, integration of green roof, and application of operable roller blinds are beneficial in reducing the final HVAC energy use up to 32% and enhancing thermal comfort up to 46%. Subsequently, three optimal solutions are selected and analyzed under the highest maximal temperature heatwaves detected during the 2001–2020, 2041–2060, and 2081–2100 periods. It is found that non of the optimal solutions are able to fully suppress overheating during heatwaves and the cooling system outage. The indoor operative temperatures reach more than 29 ° C , which can cause serious health issues for the occupants. The situation will be exacerbated in the future since an increase in maximum Heat Index (HI) between 0.28 °C and 0.49 °C, an increase in the maximum operative temperature between 1.34 ° C and 2.33 ° C , and a decrease in Thermal Autonomy (TA) between 17% and 28% are estimated. Finally, some recommendations are provided for practice and future research. [ABSTRACT FROM AUTHOR]

[Display omitted] • UHMA research are booming in publications, authors, institutions, and research areas. • UHMA has evolved into a transdisciplinary research field, covering many emerging areas, beyond the built environments. • UHMA research covers: (i) UHI impact assessment and cause identification, (ii) microclimate regulation and human thermal comfort, (iii) climate-related health impact and adaptation, and (iv) urban heat mitigation strategies and techniques. • This study highlights UHMA knowledge gaps in seven dimensions and UHMA development in five aspects. • This study proposes 13 suggestions for promoting the transformation from UHMA research to practice. This paper presents a bibliometric review of the history and evolution of Urban Heat Mitigation and Adaptation (UHMA) from 1989 to 2021 to identify its research progress, knowledge gaps, and future research directions. The results indicate that research on UHMA is booming and that the field has diversified over time. Existing studies have examined UHMA from the environmental, technical, health, economic, and social perspectives. Over time, UHMA has evolved into a transdisciplinary research field, covering many emerging areas beyond built environments, including materials, computer sciences, physiology, chemistry, and geosciences. Relevant UHMA topics can be divided into four research clusters: (i) UHI impact assessment and cause identification, (ii) microclimate regulation and human thermal comfort, (iii) climate-related health impact and adaptation, and (iv) urban heat mitigation strategies and techniques. This study highlights some knowledge gaps in UHMA research, including (i) overfocusing on urban heat causes, effects, and mitigation solutions; (ii) more focus on mitigation, overshadowing adaptation, and preparation; (iii) highlighting materials and vegetation, but overlooking water features and urban form; (iv) incomplete understanding of heat-related impacts; (v) focusing more on microclimate and heat islands rather than extreme heat; (vi) unsound policy, social, and economic support; and (vii) lack of actual UHMA implementation. There are also some challenges in UHMA development, including (i) the uneven distribution of publications, authors, and affiliations; (ii) topic, affiliation, and nation aggregation and bias; (iii) slow evolution in key disciplines, publications, and authors; (iv) knowledge isolation owing to tendentious academic collaboration and communication; and (v) limited journal scope and restricted methodological approaches. To overcome such challenges and enhance UHMA research and policy, 13 suggestions were made. Overall, by promoting transdisciplinary UHMA research informed by climatic sciences, scientific models, policy-relevant techniques, and socio-economic support, this study is expected to better frame UHMA research and bridge science and policy. [ABSTRACT FROM AUTHOR]

• Investigated climate change impacts on office building performance in Brussels. • Applied a long-term climate change sensitive system sizing and design approach. • Time-integrated discomfort analysis showed a major surge in overheating by 2100. • Long-term climate change resistivity is ensured in reference building until 2100. • Primary energy use and GHG emission findings are useful in mixed humid climates. As climate change continues, it is expected that the risk of overheating will rise in both new and existing buildings in mixed humid climate zones in Europe. This study introduced a novel climate change sensitive sizing and design approach for cooling and heating systems in nearly zero-energy office buildings in Brussels, Belgium, for different weather scenarios. This approach considered the long-term effects of climate change on building performance. The climate change effects were assessed using current and future climate data from the regional atmospheric model, MAR. To demonstrate the approach, a case study of a nearly zero-energy office building in Brussels was conducted. The reference building model was first calibrated using monthly energy use data from the year 2019 using ASHRAE Guideline 14. Then, the building was evaluated with different HVAC strategies and their performances were quantified. The results indicated an increase in overheating as high as 1.2 °C and cooling energy use as high as 13.5 kWh/m2 and a decrease in overcooling as low as 0.3 °C and heating energy use as low as 10.9 kWh/m2 in the reference building by the end of the century. In addition, due to climate change sensitive sizing and design approach coupled with optimal sizing, the reference building was climate change resistant towards the worst-case scenario by end of the century with up to 3.7 for climate change overheating resistivity and 20.2 for climate change overcooling resistivity. Finally, the paper provided recommendations for future practice and research based on the study findings. [ABSTRACT FROM AUTHOR]

[Display omitted] • High resolution data from a Dutch net zero energy neighborhood is analysed. • Most buildings are positive energy, emit less carbon than they offset. • Large occupant differences in energy demand are visible across the households. • Occupant preferences and weather conditions greatly influence thermal energy demand. • Due to the high thermal efficiency, there is a high risk for summer overheating. Decarbonizing the building stock is a central component of global climate change mitigation efforts. In practice, this decarbonization can be achieved by a variety of different measures, including improvements in building energy efficiency, electrification of energy demand to reduce reliance on fossil fuels, and installation of distributed (renewable) generation in conjunction with flexible storage. However, these large-scale, often disruptive changes to the built environment also raise a number of concerns, such as loss of occupant comfort exacerbated by climate change, and introduction of additional stressors on the distribution grid. In this paper, we demonstrate several conclusions using detailed sub-hourly data of two years (2019–2020) collected from 40 homes in a recently refurbished net-zero energy neighborhood in the Netherlands. This paper shows that, in renovation projects like the case study, net-zero energy balances should be considered on a neighborhood, rather than building level to minimize worst case planning by accounting for occupant influences and seasonal effects. Furthermore, the energy flexibility and climate resilience in the buildings seems to be rather limited, as a result of energy efficiency improvements. While helpful in climate change mitigation efforts, the large seasonal differences in energy demand and generation imply that this evolution is perhaps sub-optimal from the grid perspective. The results illustrate that all homes in the study were net-zero energy over the two year period, sometimes net positive by up to a factor of three. This led to considerable excess generation especially during the summer months. In addition, it was found that indoor air temperature sensors in a number of buildings showed overheating beyond guideline thermal comfort temperature of 25°C, showing potential thermal comfort and heat stress for vulnerable occupants. These results motivate energy storage or modifications of the installed heat pumps to leverage summer excess generation while reducing the impact of summer heat waves. These findings should enable the Netherlands and other countries aiming to fully decarbonize the building stock formulate better, future-proof policies. [ABSTRACT FROM AUTHOR]

Previous work by the same authors has shown that in mixed-humid climates, tight, super-insulated residential structures can experience high humidity events in summer months. Standard, commercially available vapor compression-based air conditioners struggle to control humidity in such structures with low cooling loads. Therefore a desiccant-assisted heat pump system for tight, super-insulated residential structures is proposed. This paper first reviews solid desiccant cooling cycles. Then a hybrid desiccant cooling cycle is explained and a prototype machine based on the cycle is described. The machine, known as HAWC (hybrid air/water conditioner), accomplishes cooling, dehumidification, ventilation, and domestic hot water heating. This paper models the HAWC within the framework of dynamic building energy modeling software and concludes that a refined version of the HAWC prototype is capable of completely eliminating high humidity events in the summer time while still saving energy as compared to a traditional HVAC system. [ABSTRACT FROM AUTHOR]

Global warming has drawn great attention in recent years because of its large impact on many aspects of the environment and human activities in buildings. One area directly affected by climate change is the energy consumption for heating and cooling. To quantify the impact, this study used the HadCM3 Global Circulation Model (GCM) to generate weather data for future typical meteorological years, such as 2020, 2050, and 2080, for 15 cities in the U.S. based on three CO 2 emission scenarios. The method was validated by comparing the projected TMY3 data using HadCM3 with the actual TMY3 data. By morphing method, the weather data was downscaled to hourly data for use in building energy simulations by EnergyPlus. Two types of residential buildings and seven types of commercial buildings were simulated for each of the 15 cities. This paper is the first to systematically study the climate change impact on various types of residential and commercial buildings in all seven climate zones in the U.S. through EnergyPlus simulations and provide weighted averaged results for national-wide building stock. We also identified geographical dependency of the impact of climate change on future energy uses. There would be a net increase in source energy consumption by the 2080s for climate zones 1–4 and net decrease in climate zones 6–7 based on the HadCM3 weather projection. Furthermore, this paper investigated natural ventilation performance in San Francisco, San Diego, and Seattle with improved natural ventilation model. We found that by the 2080s passive cooling would not be suitable for San Diego because of global warming, but it would still be acceptable for San Francisco and Seattle. [ABSTRACT FROM AUTHOR]

Buildings are significant drivers of climate change, generating one third of global greenhouse gas emissions. When new buildings are constructed to high performance standards, increased rates of building replacement spurred by rising property values can raise the operating efficiency of building stocks. However, it can take years before the embodied greenhouse gas emissions associated with new construction are offset by more efficient operations. This paper calculates the carbon dioxide emission payback period of newly constructed efficient single family homes in Vancouver, British Columbia. The average carbon dioxide emission payback period of 168 years for a typical high efficiency new home renders it unlikely that emission savings will be realized before it is replaced. A statistical model called the Teardown Index is presented, which indicates that replacing older poorly performing homes with new high efficiency homes in Vancouver will result in 1.3–2.8 million tonnes of additional carbon dioxide equivalent emissions between 2017 and 2050. For each percent increase to the compound annual growth rate of property values, an additional 150 thousand tonnes of CO 2 e will be released between 2017-2050. The findings suggest that current policies aimed at reducing emissions through new high efficiency buildings should be reconsidered. [ABSTRACT FROM AUTHOR]

Energy retrofit of existing buildings was highlighted as an efficient massive action to decrease energy consumption and emissions of greenhouse gases. But, detecting the optimal retrofit strategies for groups of buildings is nowadays a highly complex problem. Their energy consumptions are influenced by building-related factors (climate, building envelope, building services and systems) and by user-related ones (building operation and maintenance, occupant behavior, and indoor environmental quality). Detecting the contributions of each factor and grouping buildings with similarities –in order to establish similar retrofit strategies – are the main issues that can be faced by statistical multivariate methods. In this paper, we present a new and broader view to propose retrofit strategies adapted to a climate change scenario and analyzed from the economic and energy-poverty points of view, by using multivariate and clustering techniques that include building-related and user-related metrics influencing the energy consumption of groups of buildings. A group of 10 single-family houses in Argentina were selected as a case-study. The contributions of eleven building-related driving metrics and four user-related ones to the energy consumption were analyzed. Then, the more representative house of the cluster was selected for a retrofit analysis for current weather conditions and for future weather under a climate change scenario. The analysis also included an economic assessment in relation to the energy poverty. The higher CV values found in the user-related metrics highlight the influence of occupants in the energy consumption that can result in huge gaps between real and predicted energy performance of buildings. This holistic study contributes to reveal the internal structure of energy consumption and to generate useful knowledge about energy retrofit of the built environment in cities, particularly for those householders which are more susceptible to suffer the adverse effects of energy poverty and climate change. [ABSTRACT FROM AUTHOR]

Buildings account for 40% of total energy consumption in the UK and more than 55% of this energy is used by heating, ventilation, air-conditioning and refrigeration (HVAC&R) systems. This significant energy demand and the ascending trend in utilising HVAC&R systems together with the global need to impose energy-efficiency measures underline the importance of selecting the most appropriate HVAC&R system during the design process. This paper reviewed and classified a broad range of principal multiple attribute decision making methods. Among them, the fuzzy multiple attribute decision making approach was adopted to develop a decision making tool for HVAC&R systems selection. This was mainly due to the ability of this method to deal with the uncertainties and imprecisions of the linguistic terms involved in the decision making process. In order to make a decision on HVAC&R systems selection, 58 alternative systems, including both primary and secondary parts, were examined. The scope of this study enabled the consideration of all 18 climate regions in the UK and included the effects of climate change. In addition, the Government’s electricity decarbonisation plans were integrated within the developed decision making model for HVAC&R systems selection in office buildings in the UK. Finally, the model was transferred into a computational tool with a user-friendly interface. [ABSTRACT FROM AUTHOR]

Social housing sector is very important in Brazil, due to the necessity of expansion and investments being placed through a substantial government program. Residential buildings are expected to last at least 50 years according to Brazilian standards. Many residential projects in the sector already perform medium or poorly in terms of energy efficiency and thermal comfort today, and their designs are not analysed considering climate change. Therefore, the aim of this paper is to investigate the result of analysing the thermal and energy performance of social housing projects considering climate change, and to assess the impact on the operational phase of introducing energy efficiency measures in the sector, and exploring methods of adaptation to climate change. A representative project of the lower income sector housing was used as case study with the evaluation of measures through thermal and energy simulation with current and future weather files for the cities of São Paulo and Salvador. Results were compared using predicted energy consumption and cooling and heating degree-hours as indicators. The results highlighted some differences related to the climate scenarios and indicator analysed, and showed that the incorporation of energy efficiency measures in current social housing projects is of fundamental importance to minimize the effects of climate change in the coming decades. [ABSTRACT FROM AUTHOR]

More than 30% of the total primary energy in the world is consumed in buildings. It is crucial to reduce building energy consumption in order to preserve energy resources and mitigate global climate change. Building performance simulations have been widely used for the estimation and optimization of building performance, providing reference values for the assessment of building energy consumption and the effects of energy-saving technologies. Among the various factors influencing building energy consumption, occupant behavior has drawn increasing attention. Occupant behavior includes occupant presence, movement, and interaction with building energy devices and systems. However, there are gaps in occupant behavior modeling as different energy modelers have employed varied data and tools to simulate occupant behavior, therefore producing different and incomparable results. Aiming to address these gaps, the International Energy Agency (IEA) Energy in Buildings and Community (EBC) Programme Annex 66 has established a scientific methodological framework for occupant behavior research, including data collection, behavior model representation, modeling and evaluation approaches, and the integration of behavior modeling tools with building performance simulation programs. Annex 66 also includes case studies and application guidelines to assist in building design, operation, and policymaking, using interdisciplinary approaches to reduce energy use in buildings and improve occupant comfort and productivity. This paper highlights the key research issues, methods, and outcomes pertaining to Annex 66, and offers perspectives on future research needs to integrate occupant behavior with the building life cycle. [ABSTRACT FROM AUTHOR]

Urban heat island (UHI) and global warming effects will raise the ambient temperature of cities and increase building energy consumption. This paper discusses the residential cooling energy variations imposed by urban warming in the present and future. Data from a dynamically downscaled hourly meteorological model with a grid resolution of 5 km and for time slices 1979–2003, 2015–2039, and 2075–2099 were used for dynamic building energy simulation against a typical residential apartment in the central Taiwan region. The meteorological grids were classified as 4 city grids, 25 town grids, and 31 countryside grids based on their urban morphology attributes. The values from 20 countryside grids with lower average ambient temperatures during cooling seasons were selected as reference. The spatial and temporal distributions of the impact of indoor overheating risk and annual cooling energy consumption by UHI and global warming effects were quantified against the reference value. Furthermore, because the energy penalty can be used to rapidly estimate the urban warming impact on total cooling energy consumption of a given city, the linear correlation of the energy penalty and the magnitude of the UHI effect was also established and discussed. [ABSTRACT FROM AUTHOR]

Climate change is increasing heatwaves occurrence, which consequently impact buildings indoor overheating during summers. While indoor overheating in free-running buildings during future typical summers has been quantified by many researchers, its intensification during future heatwaves remains relatively under-researched. Furthermore, analyzing the dynamic thermal response of free-running buildings to these varying local climate changes is current lacking. This paper objective and novelty is to understand the building dynamic thermal change during different indoor overheating periods induced by several hot outdoor sequences during present and future climates. Two sensitivity analysis methods are used for this analysis, applied to a free-running top floor apartment of a collective building: the Morris method, which allows to quickly select the most influential parameters and the Sobol method, which allows to conduct an in-depth temporal uncertainty and sensitivity analysis. Results show that in the semi-oceanic climate of the French capital Paris, while the indoor overheating is projected to drastically increase, the building dynamic thermal behavior is greatly modified amongst the three climate sequences under study: present and future typical summers, and future heatwave of the mid-century. During the future heatwave in Paris, the building response is projected to behave more similarly as it would in a French Mediterranean city. Static design parameters such as thermal mass, albedo and emissivity or glazing percentage, as well as dynamic design parameters such as the operation of the ventilative cooling and solar control strategies all play an important role in regulating the building indoor overheating, with a different ranking depending on the outdoor local climate conditions. These results are of foremost importance to provide guidance in the design of adapted buildings to climate change, which can withstand future extreme heat periods. [ABSTRACT FROM AUTHOR]

Abstract: This paper aims to present the more recent advances regarding the climatic zoning based on the Climate Severity Index and its relation with the building energy requirements. Three are the major contributions in this paper, the first one is the comparison of the energy performance requirements in different European Union Member States; secondly the definition of the global Climate Severity Index, and finally the definition of the Climate Severity Index for tertiary buildings. Regulators and building designers are the most interested in these results. The comparison of the energy requirements, gives to the regulators, valuable information in order to establish a consistent requirement in their own country. Thanks to the definition of the Global Climate Severity Index, the previous can be done in terms of global-heating plus cooling-energy needs, allowing a homogeneous comparison along Europe or Worldwide. Also, these results allow comparing the energy requirements in one country to those with similar climate. From the designer point of view, the results of this paper could be used to estimate the thermal properties –U values – of the building envelope, and the solar shading factor of the windows of a tertiary building assimilating it to a residential building in an equivalent climatic zone. [Copyright &y& Elsevier]

Cities are dissipative structures. As such, cities generate heat, a phenomenon known as urban heat island (UHI). Even though the UHI is one of the most relevant effects of urbanization on urban climate, up-to-date methodologies to include it in the estimation of buildings’ energy consumption are still scarce. During the last 30 years, different methods and software have been developed to measure a thermal building's demand. Building performance simulation is commonly used to calculate heating and cooling demand. However, such techniques do not adequately include the urban heat island effect, which could have an extreme impact on a building's energy consumption. In fact, building operation is doubly connected with the urban environment: on the one hand, buildings generate heat that warms up the environment, and on the other hand, the urban environment alters building performance by the influence of UHI. In this paper, a methodology to incorporate the UHI effect in building performance simulation is proposed. Urban weather data were downscaled at the urban morphology building level to estimate the cooling demand of different types of residential buildings. The global energy penalty for the whole residential building stock was estimated in four South American Pacific coastal cities. The results indicate that when UHI is incorporated, an increase in energy demand between 15% and 200% can be expected. These results challenge the validity of current assessments performed in absence of the UHI effect. At the same time, these results open up the discussion for the inclusion of urban planning measures aiming at reducing the UHI effect on a building's energy demand. [ABSTRACT FROM AUTHOR]