Search

The fault management process is facilitated by equipping power distribution systems with automated devices, especially remote-controlled switches (RCSs). Although RCS plays a key role in improving the system's reliability, it imposes significant investment, installation, and maintenance costs. Hence, RCSs should be optimally located in distribution feeders for the highest profit. In previous works, reliability-oriented mathematical optimization models have been formulated to reach this goal. However, the number of test solutions exponentially grows with the problem size to find the globally optimal solution. This paper uses machine learning to propose a scalable and easy-to-implement model for optimal switch placement in real power distribution systems. At first, the features of candidate points for installing RCSs are introduced. Then, a learning model is applied to deeply explore the relationship between these features and optimal locations for installing RCSs. After training, the learning-based surrogate model directly determines the optimal RCS placement strategy in real power distribution systems by leveraging knowledge gained from past experiences. Simulation results demonstrate that the proposed surrogate model is approximately 29 times faster than the integer programming-based mathematical model, without a significant loss of accuracy, when implemented on a modified 11 kV network connected to Bus 4 of the Roy Billiton test system. This paper also employs explainable artificial intelligence (XAI) tools to select the most important features, where the Hamming loss is decreased by approximately 5%. [ABSTRACT FROM AUTHOR]

The aging of transformer oil–paper insulation (OPI) contributes significantly to transformer failure and reduced service life. Therefore, reliable and precise evaluation of the aging status of transformer insulation condition is crucial in averting transformer failure. This article proposes a novel deep learning-based aging condition assessment technique of transformers by combining FDS (Frequency domain spectroscopy) and squeeze-and-excitation-enabled convolutional neural network (SE-CNN). An intrinsic product-based transformation using a Gramian angular field is employed to dimensionally expand the 1-D FDS signals acquired from OPI samples into 2D images. Each feature extraction channel in the SE-CNN-based aging diagnosis framework is assigned a specific weight, enabling the model to concentrate on the most relevant features while discarding the rest. Furthermore, the effect of moisture variation on the model is also considered under three different conditions to ensure the consequence of compensation for the effect of moisture on FDS. A comparison with traditional machine learning models has also been made to ensure the viability of the proposed methodology. Additionally, the model is interpreted by creating explanation weight plots of the feature coefficients using a local interpretable model-agnostic explanations (LIME) method in Python. The findings demonstrate that the novel aging diagnosis framework visually assesses the transformer's OPI system with the highest accuracy of 99.12% in the test set. Furthermore, it facilitates the automatic extraction of deep aging features, thus providing better generalization and convergence capability. [ABSTRACT FROM AUTHOR]

In the face of uncontrolled offensive content on social media, automated detection emerges as a critical need. This paper tackles this challenge by proposing a novel approach for identifying offensive language in multilingual, code-mixed, and script-mixed settings. The study presents a novel multilingual hybrid dataset constructed by merging diverse monolingual and bilingual resources. Further, we systematically evaluate the impact of input representations (Word2Vec, Global Vectors for Word Representation (or GloVe), Bidirectional Encoder Representations from Transformers (or BERT), and uniform initialization) and deep learning models (Convolutional Neural Network (or CNN), Bidirectional Long Short Term Memory (or Bi-LSTM), Bi-LSTM-Attention, and fine-tuned BERT) on detection accuracy. Our comprehensive experiments on a dataset of 42,560 social media comments from five languages (English, Hindi, German, Tamil, and Malayalam) reveal the superiority of fine-tuned BERT. Notably, it achieves a macro average F 1 -score of 0.79 for monolingual tasks and an impressive 0.86 for code-mixed and script-mixed tasks. These findings significantly advance offensive language detection methodologies and shed light on the complex dynamics of multilingual social media, paving the way for more inclusive and safer online communities. [ABSTRACT FROM AUTHOR]

In the face of uncontrolled offensive content on social media, automated detection emerges as a critical need. This paper tackles this challenge by proposing a novel approach for identifying offensive language in multilingual, code-mixed, and script-mixed settings. The study presents a novel multilingual hybrid dataset constructed by merging diverse monolingual and bilingual resources. Further, we systematically evaluate the impact of input representations (Word2Vec, Global Vectors for Word Representation (or GloVe), Bidirectional Encoder Representations from Transformers (or BERT), and uniform initialization) and deep learning models (Convolutional Neural Network (or CNN), Bidirectional Long Short Term Memory (or Bi-LSTM), Bi-LSTM-Attention, and fine-tuned BERT) on detection accuracy. Our comprehensive experiments on a dataset of 42,560 social media comments from five languages (English, Hindi, German, Tamil, and Malayalam) reveal the superiority of fine-tuned BERT. Notably, it achieves a macro average F 1 -score of 0.79 for monolingual tasks and an impressive 0.86 for code-mixed and script-mixed tasks. These findings significantly advance offensive language detection methodologies and shed light on the complex dynamics of multilingual social media, paving the way for more inclusive and safer online communities. [ABSTRACT FROM AUTHOR]

This paper for the first time treats the interpretation of electrochemical noise time-frequency spectra as an image classification problem. It investigates the application of a convolutional neural network (CNN) for deep learning image classification of electrochemical noise time-frequency transient information. Representative slices of these spectra were selected by our transient analysis technique and served as input images for the CNN. Corrosion data from two types of pitting corrosion processes serve as test cases: AISI304 and AA2024-T3 immersed in a 0.01M HCl and 0.1M NaCl solution between 0 and 1ks after immersion, respectively. Continuous wavelet transform (CWT) spectra and modulus maxima (MM) are used to train the CNN, either individually or in a combined form. The classification accuracy of the CNN trained with the combined dataset is 0.97 and with the two individual datasets 0.72 (only CWT spectrum) and 0.84 (only MM). The ability to additionally classify a more progressed form of pitting corrosion of AA2024-T3 between 9 and 10ks after immersion indicates that the proposed method is sufficiently robust using combined datasets with CWT spectra and MM. The pitting processes can effectively be detected and classified by the proposed method. The most important contribution of the present work is to introduce a novel procedure that decreases the classical need for large amounts of raw data for training and validation purposes, while still achieving a satisfactory classification robustness. A relatively small number of individual signals thereby generates a multitude of input images that still contain all relevant kinetic information about the underlying chemo-physical process. [Display omitted] • Electrochemical noise interpretation is treated as an image classification problem. • Continuous wavelet transform spectra are divided into single transient spectra. • A small number of individual signals generates a multitude of input images. • Amount of raw data needed for training the convolutional neural network is reduced. • Modulus maxima increase the classification accuracy of pitting corrosion. [ABSTRACT FROM AUTHOR]

Implementing key engineering solutions to optimise the operation of energy industries requires daily electricity demand forecasting and including uncertainty, to promote markets insight analysis as part of their strategic planning, regulating and supplying electricity to consumers. This paper proposes hybrid artificial intelligence models combining convolutional neural networks (CNN) as a feature extraction algorithm with extreme learning machines (ELM) as a framework to predict electricity demand with confidence intervals generated by Kernel Density Estimation (KDE) approaches. In order to develop CELM-KDE model, time-lagged series of daily electricity demand with local climate variables based on the air temperature, atmospheric vapour pressure, evaporation, solar radiation, humidity and sea level pressures are used to train the proposed CELM-KDE hybrid model. In order to fully evaluate the newly developed model from a point-based, as well as a probabilistic prediction strategy, the observed and predicted electricity demand as well as the probability distribution of errors are analysed using KDE method that operates without prior data distribution assumptions. Based on observed and predicted electricity demand and the relevant probabilistic confidence intervals generated by the CELM-KDE model, the final results show that the proposed method attains significantly better probability interval predictions than traditionally-used point-based models. The proposed CELM-KDE model is demonstrated to be highly effective in providing a comprehensive coverage of predicted errors, as well as providing greater insights into the average bandwidth and detailed predicted electricity demand in the testing stage. The results also indicate that the proposed hybrid model is a reliable decision support tool to develop engineering solutions in area of energy modelling, monitoring and forecasting, which could potentially be useful to the industry policymakers. We show that the point-and probabilistic-based electricity demand predictive models can be employed as an effective tool to improve accuracy of forecasting and provision of insights for national electricity markets and key energy industry stakeholder application tools. [Display omitted] • A hybrid deep learning model for daily electricity demand prediction is proposed. • A Kernel Density Estimation is applied to derive probabilistic prediction intervals. • The algorithm quantifies uncertainties in point-based electricity demand predictions. • The proposed model outperforms deep learning models using statistical uncertainty indicators. [ABSTRACT FROM AUTHOR]

Understanding thermal dynamics and obtaining the computational model of residential buildings enable its scaled application in energy retrofits, control optimization and decarbonization. In this paper, we present a deep learning approach to model building thermal dynamics with smart thermostat data collected from residential buildings, with the goal to investigate model generalizability. In the first stage, we developed and compared different Deep Learning architectures including Convolutional Neural Networks (CNN), Long Short-Term Memory (LSTM) models and CNN-LSTM to predict indoor air temperature in a multi-step time horizon. In the second stage, we implemented a Transfer Learning (TL) process, which aims to improve the prediction performance on a new set of buildings (targets), exploiting the knowledge of related or similar buildings (sources). Different TL strategies and source model identification methods were investigated. The study showed that the CNN-LSTM performed the best among the architectures compared, with an average Mean Absolute Error (MAE) of 0.26 °C for one-hour-ahead (twelve 5-min future steps) predictions. Furthermore, the results showed that freezing the LSTM layer and fine-tuning the other layers of the CNN-LSTM achieved the best performance among four TL strategies, which further improved the performance with respect to a machine learning approach by 10%, and proving the effectiveness and generalizability of the proposed approach. A comparison of three different source model identification methods showed that randomly selecting source models constrained by similar building characteristics can provide good TL performance while retaining simplicity comparing with other quantitative source identification methods. • Investigated deep transfer learning techniques for residential thermal dynamics using smart thermostat data. • Compared diverse neural network architectures for indoor temperature prediction. • Explored transfer learning to enhance model accuracy. • Evaluated four transfer learning methods and three source model identification approaches. • Achieved high accuracy and generalizability with the proposed deep transfer learning approach. [ABSTRACT FROM AUTHOR]

Traditional machine learning methods require the assumption that training and test data are drawn from the same distribution, which proves challenging in real-world applications. Moreover, deep learning models require a substantial amount of labeled data for training in classification tasks and limited samples may lead to overfitting. In many real-world scenarios, there is an insufficient supply of labeled samples within the target domain for learning. Transfer learning offers an effective solution, allowing knowledge from a source domain to be transferred to a target domain. Additionally, data augmentation enhances model generalization by increasing data samples, particularly beneficial when dealing with limited target domain data. In this paper, we synergistically enhance the model's performance on classification tasks by integrating transfer learning techniques with a data augmentation strategy. By conducting numerous experiments across various datasets, we verified the effectiveness of our proposed approach. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) has experienced phenomenal expansion over the past few years and has emerged as one of the most dynamic sectors of the international market. Android has become the driving force behind the rapid development of the IoT, and malware is one of the most severe concerns. Android is an open-source platform with a significant number of users. The identification of Android malware has become more critical in cybersecurity due to the meteoric rise of Android malware over the past few years and the severity of the damage it inflicts on smartphone users. Existing traditional Android malware detection methods based on machine learning have achieved encouraging performance. Still, the solution requires a massive workforce of feature engineering to build dynamic or static features and continuous learning through pre-extracted features to maintain high performance in identifying malware. Therefore, technologies for end-to-end malware detection without human interaction are necessary. In response to the rapid evolution of Android malware, a convolutional neural network that can acquire knowledge without requiring feature extraction is ideally suited. This paper offers a unique classification approach for malware based on a convolutional neural network, with feature extraction selected from the current pre-trained models DenseNet169, Xception, InceptionV3, ResNet50, and VGG16. The proposed methods have an advantage over existing detection methods due to their end-to-end learning process. Our suggested approaches convert Android APK files to binary codes and RGB images for usage as inputs to deep learning models. These models are trained and evaluated using the CICInvesAndMal2019 dataset, which consists of 333 benign and 428 malicious applications. Experiments demonstrate that the proposed approaches achieve a classification accuracy of 95.24%, 95.24%, and 95.83% for DenseNet169, InceptionV3, and VGG16, respectively, on a 761-sample dataset of malware, which is superior to other compared algorithms. Compared to previous methods, our suggested methods are more applicable to Android IoT devices since they do not require manual feature engineering and consume fewer resources. [ABSTRACT FROM AUTHOR]

One of the most important features of a reliable power system is its capability to supply the demand continuously. This continuous supply has been maintained by the transient stability of the system against large disturbances. The study of this type of stability is examined through different indicators. One of the common indicators to evaluate the transient stability of the power system is the well-known Critical Clearing Time (CCT) index. Conventional methods for calculating CCT have presented good accuracy, however, their computational cost is very high which makes them not suitable for real-time applications and real large-scale networks. Considering their ability to feature extraction of big data, deep neural networks can be utilized as reliable tools to cover these deficiencies. In this regard, to cover the shortcomings of the conventional methods, this paper proposes a method based on deep Convolutional Neural Networks (CNN) to estimate the CCT index in real-time power system applications. Moreover, to analyze a realistic case, nonlinear limiters of the excitation systems which have a considerable effect on transient stability index are considered in this study. Thanks to the using of several deep layers and the comprehensive established database, the accuracy of proposed method is appropriately high. Numerical studies on IEEE standard networks as well as a real case in Iran Power Grid (IPG) represents the advantages of the proposed method. • A deep-learning-based convolutional neural network is designed to estimate CCT index of power system. • Nonlinear limiters of the excitation system are taken into account. • A real case study in Iran grid is considered for simulation. • As a result, the transient stability of system is accurately determined in on-line manner. [ABSTRACT FROM AUTHOR]

Automatic seismic phase detection and phase arrival time picking are always fundamental tasks in seismology. With the emergence of machine learning, and deep learning in particular, a number of neural network architectures are being used to explore the correlations between seismic waveforms and hidden information of interest. In this paper, we present a sequential attention (SEA) module that can learn both local and long-distance corrections to effectively extract sequential features. This module is lightweight and plug-in-play. Based on the SEA module, a fully convolutional neural network with sequential attention mechanism was constructed to detect seismic events and determine the arrival time of phases. Further experiments on STEAD dataset, in comparison with existing methods, show that our proposed model outperforms other algorithms with a higher F1-score (100% for seismic detection, 98.8% for P arrival picking, and 89.0% for S arrival picking) and fewer residual errors. Comparatively, our model has a quarter of the model parameters and computational complexity as well as a 36.7% reduction in processing time compared to the current state-of-the-art method. This demonstrates that the proposed architecture is effective for seismic sequential learning tasks and, as a result, can serve as an improved alternative backbone. [ABSTRACT FROM AUTHOR]

Malware detection approaches can be classified into two classes, including static analysis and dynamic analysis. Conventional approaches of the two classes have their respective advantages and disadvantages. For example, static analysis is faster but cannot detect the malware variants generated through code obfuscation, whereas dynamic analysis can effectively detect variants generated through code obfuscation but is slower and requires intensive resources. This paper proposes a novel deep learning-based approach for malware detection. It delivers better performance than conventional approaches by combining static and dynamic analysis advantages. First, it visualises a portable executable (PE) file as a coloured image. Second, it extracts deep features from the colour image using fine-tuned deep learning model. Third, it detects malware based on the deep features using support vector machines (SVM). The proposed method combines deep learning with machine learning and eliminates the need for intensive feature engineering tasks and domain knowledge. The proposed approach is scalable, cost-effective, and efficient. The detection effectiveness of the proposed method is validated through 12 machine learning models and 15 deep learning models. The generalisability of the proposed framework is validated on various benchmark datasets. The proposed approach outperformed with an accuracy of 99.06% on the Malimg dataset. The Wilcoxon signed-rank test is used to show the statistical significance of the proposed framework. The detailed experimental results demonstrate the superiority of the proposed method over the other state-of-the-art approaches, with an average increase in accuracy of 16.56%. Finally, to tackle the problems of imbalanced data and the shortage of publicly available datasets for malware detection, various data augmentation techniques are proposed, which lead to improved performance. It is evident from the results that the proposed framework can be useful to the defence industry, which will be helpful in devising more efficient malware detection solutions. [Display omitted] • A novel hybrid framework combines deep transfer learning and machine learning for malware detection. • An image-based PE dataset is generated by transforming malicious and benign Windows executables into RGB-coloured images. • The second step involves a novel combination of deep learning and machine learning models for malware detection. • An in-depth analysis using 15 deep learning and 12 machine learning models is presented for malware detection. • The framework is scalable, cost-effective, and efficient. It eliminates the need for domain experts for reverse engineering tasks. [ABSTRACT FROM AUTHOR]

Building occupancy information could aid energy preservation while simultaneously maintaining the end-user comfort level. Energy conservation becomes essential since energy resources are scarce and human dependency on appliances is only exponentially increasing. While intrusive sensors (i.e., cameras and microphones) can raise privacy concerns, this paper presents an innovative non-intrusive occupancy detection approach using environmental sensor data (e.g., temperature, humidity, carbon dioxide (CO 2), and light sensors). The proposed scheme transforms multivariate time-series data into images for better encoding and extracting relevant features. The utilized image transformation method is based on data normalization and matrix conversion. Precisely, by representing time-series in 2D space, an encoding kernel can move in two directions while it can move only in one direction when applied to a 1D signal. Moreover, machine learning (ML) and deep learning (DL) techniques are utilized to classify occupancy patterns. Several simulations are used to evaluate the approach; mainly, we investigated pre-trained and custom convolutional neural network (CNN) models. The latter attained an accuracy of 99.00%. Additionally, pixel data are extracted from the generated images and subjected to traditional ML methods. Throughout the numerous comparison settings, it was observed that the latter strategy provided the optimal balance of 99.42% accuracy performance and minimal training time across the occupancy datasets. • Exhaustive literature review on occupancy detection schemes based on sensor data. • Image transformation technique based on data normalization and matrix conversion. • Assessing a variety of pre-trained and custom CNN models to predict occupancy status. • Pixel extraction to gather values and integrate them with conventional ML algorithms. [ABSTRACT FROM AUTHOR]

Stroke, categorized under cardiovascular and circulatory diseases, is considered the second foremost cause of death worldwide, causing approximately 11% of deaths annually. Stroke diagnosis using a Computed Tomography (CT) scan is considered ideal for identifying whether the stroke is hemorrhagic or ischemic. However, most methods for stroke classification are based on a single slice-level prediction mechanism, meaning that the most imperative CT slice has to be manually selected by the radiologist from the original CT volume. This paper proposes an integration of Convolutional Neural Network (CNN), Vision Transformers (ViT), and AutoML to obtain slice-level predictions as well as patient-wise prediction results. While the CNN with inductive bias captures local features, the transformer captures long-range dependencies between sequences. This collaborative local-global feature extractor improves upon the slice-wise predictions of the CT volume. We propose stroke-specific feature extraction from each slice-wise prediction to obtain the patient-wise prediction using AutoML. While the slice-wise predictions helps the radiologist to verify close and corner cases, the patient-wise predictions makes the outcome clinically relevant and closer to real-world scenario. The proposed architecture has achieved an accuracy of 87% for single slice-level prediction and an accuracy of 92% for patient-wise prediction. For comparative analysis of slice-level predictions, standalone architectures of VGG-16, VGG-19, ResNet50, and ViT were considered. The proposed architecture has outperformed the standalone architectures by 9% in terms of accuracy. For patient-wise predictions, AutoML considers 13 different ML algorithms, of which 3 achieve an accuracy of more than 90%. The proposed architecture helps in reducing the manual effort by the radiologist to manually select the most imperative CT from the original CT volume and shows improvement over other standalone architectures for classification tasks. The proposed architecture can be generalized for volumetric scans aiding in the patient diagnosis of head and neck, lungs, diseases of hepatobiliary tract, genitourinary diseases, women's imaging including breast cancer and various musculoskeletal diseases. Code for proposed stroke-specific feature extraction with the pre-trained weights of the trained model is available at: https://github.com/rishiraj-cs/StrokeViT_With_AutoML. [Display omitted] • Most methods for stroke classification are based on slice-level prediction mechanism. • An integration of CNN and ViT is proposed for slice-level prediction. • For patient-wise predictions, stroke-specific feature extraction is proposed. • AutoML is trained on the proposed domain-specific features extracted. [ABSTRACT FROM AUTHOR]

Identification of exfoliated graphene flakes and classification of the thickness are important in the nanomanufacturing of advanced materials and devices. This paper presents a deep learning method to automatically identify and classify exfoliated graphene flakes on Si/SiO 2 substrates from optical microscope images. The presented framework uses a hierarchical deep convolutional neural network that is capable of learning new images while preserving the knowledge from previous images. The deep learning model was trained and used to classify exfoliated graphene flakes into monolayer, bi-layer, tri-layer, four-to-six-layer, seven-to-ten-layer, and bulk categories. Compared with existing machine learning methods, the presented method showed high accuracy and efficiency as well as robustness to the background and resolution of images. The results indicated that the pixel-wise accuracy of the trained deep learning model was 99% in identifying and classifying exfoliated graphene flakes. This research will facilitate scaled-up manufacturing and characterization of graphene for advanced materials and devices. • A machine intelligence approach is developed to classify exfoliated graphene flakes. • A hierarchical deep convolutional neural network is applied for the classification task. • The neural network can learn from new images while preserving the learned knowledge. • The approach is robust to the background and resolution of microscopy images. • Advanced vision techniques are incorporated to handle highly imbalanced datasets. [ABSTRACT FROM AUTHOR]

Accurate indoor location information in multi-building/floor environments is essential for establishing many indoor location-based services (LBS). Wi-Fi fingerprinting with received signal strength indicators (RSSI) has become one of the most practical techniques to localize users indoors. However, the fluctuation of wireless signals caused by fading, the multipath effect, and device heterogeneity leads to considerable variations in RSSIs, which poses a challenge to accurate localization. This paper proposes an indoor positioning method, which is constructed based on a convolutional neural network (CNN) framework. Specifically, a novel model by combining an extreme learning machine autoencoder (ELM-AE) with a two-dimensional CNN is proposed. The ELM-AE extracts critical features by reducing input dimensions, while the CNN is trained to effectively achieve significant performance in the positioning phase. To increase positioning accuracy and deal with data shortages, a data augmentation strategy by frequently adding noisy data to the original fingerprint map is devised. The statistical properties namely, the RSS values of each MAC address, are utilized to adjust input noise. The performance of the proposed system is evaluated on two Tampere and UJIIndoorLoc datasets. The experimental results show that EA-CNN achieves better performance than CNN by decreasing average positioning error up to 40.95% and 43.74% in Tampere and UJIIndoorLoc datasets, respectively. Compared to state-of-the-art deep learning-based methods, the positioning performance improves up to 68.36% in Tampere and 67.56% in the UJIIndoorLoc dataset by exploiting only 25% of the training samples. Compared to several state-of-the-art deep learning models, EA-CNN achieves higher accuracy in both positioning and floor estimation. • EA-CNN outperform the state-of-the-art CNN-based procedures. • ELM-AE decrease input dimension, and increase positioning performance of CNN. • Augmentation strategy dealing with data shortages, improve the training efficiency. • Large scale environments and crowdsourced data are utilized for evaluation. [ABSTRACT FROM AUTHOR]

Freezing of gait (FOG) is one of the most incapacitating symptoms in Parkinson's disease, affecting more than 50% of patients in advanced stages of the disease. The presence of FOG may lead to falls and a loss of independence with a consequent reduction in the quality of life. Wearable technology and artificial intelligence have been used for automatic FOG detection to optimize monitoring. However, differences between laboratory and daily-life conditions present challenges for the implementation of reliable detection systems. Consequently, improvement of FOG detection methods remains important to provide accurate monitoring mechanisms intended for free-living and real-time use. This paper presents advances in automatic FOG detection using a single body-worn triaxial accelerometer and a novel classification algorithm based on Transformers and convolutional networks. This study was performed with data from 21 patients who manifested FOG episodes while performing activities of daily living in a home setting. Results indicate that the proposed FOG-Transformer can bring a significant improvement in FOG detection over the reproduction of related approaches based on machine and deep learning (i.e., from 0.916 to 0.957 in the AUC metric compared with the baseline, with a corresponding sensitivity, specificity, and precision of 0.842, 0.939 and 0.617, respectively) using a leave-one-subject-out cross-validation (LOSO CV). These results present opportunities for the implementation of accurate monitoring systems for use in ambulatory or home settings. [ABSTRACT FROM AUTHOR]

Froth Flotation is one of the fundamental processes used in iron ore attainment. It involves various physical–chemical reactions, and its multivariate control is not trivial. Traditionally, plant operators get quality measurements from laboratory analysis of sampled material, which can take hours to be published. In this paper, we present alternatives that eliminate both the necessity to periodically sample material as well as the delay associated with laboratory analysis: a predictive machine learning model working as a soft sensor. Two different classes of models were developed, exploring both deep and shallow approaches of machine learning, with a deep neural network architecture constructed for the particular task at hand. All models yielded accurate predictions, with results favoring the deep neural network when a larger volume of data is available. [ABSTRACT FROM AUTHOR]

Recent work has highlighted the vulnerability of many deep machine learning models to adversarial examples. It attracts increasing attention to adversarial attacks, which can be used to evaluate the security and robustness of models before they are deployed. However, to our best knowledge, there is no specific research on the adversarial robustness and attacks for multi-view deep models. Based on the fact that adversarial examples generalize well among different models, this paper takes the adversarial attack on the multi-view convolutional neural network as an example to investigate the adversarial robustness of multi-view deep models, and further proposes effective multi-view adversarial attacks. This paper proposes two strategies, two-stage attack (TSA) and end-to-end attack (ETEA), to attack against well-trained multi-view models. With the mild assumption that the single-view model on which the target multi-view model is based is known, we first propose the TSA strategy. The main idea of TSA is to attack the multi-view model with adversarial examples generated by attacking the associated single-view model, by which state-of-the-art single-view attack methods are directly extended to the multi-view scenario. Then we further propose the ETEA strategy where the multi-view model is provided publicly. The ETEA is applied to accomplish direct attacks on the target multi-view model, where we develop three effective multi-view attack methods. Extensive experimental results show that multi-view models are more robust than single-view models and demonstrate the effectiveness of the proposed multi-view adversarial attacks. [ABSTRACT FROM AUTHOR]

In this paper a multi-modal unsupervised Deep Learning based algorithm for fault detection is proposed. Such method is applied to real data from a testing procedure implemented on an industrial production line. Both thermal images and current and power measurements coming from industrial refrigerators are collected. The considered dataset is highly unbalanced with the vast majority of samples being healthy. Thermal images are processed via a Deep Convolutional neural network. The features extracted from the thermal images are thus merged to structured data of power, current and temperature. Therefore, a Deep Auto-Encoder is trained on the dataset to signal anomalies corresponding to faults in the refrigerators. Three different methods are trained and compared: (1) an automatic method in which an expert extracts relevant features from thermal images without using the image recognition module; (2) a semi-automatic method where the convolutional neural network is applied to regions of interest within the thermal images selected by an expert operator; (3) a fully automatic method in which the Deep convolutional network processes the whole thermal image without any human intervention. The three methods show comparable results with nevertheless slight differences. [ABSTRACT FROM AUTHOR]