Search

The rapid development of miniaturized, high-frequency, and highly integrated microelectronic devices has brought about critical issues in electromagnetic compatibility and thermal management. In recent years, there has been significant interest in lightweight polymer-based composites that offer both electromagnetic interference (EMI) shielding and thermal conductivity. One promising approach involves constructing three-dimensional (3D) interconnection networks using functional fillers in the polymer matrix. These networks have been proven effective in enhancing the thermal and electrical conductivity of the composites. This mini-review focuses on the preparation and properties of 3D network-reinforced polymer composites, specifically those incorporating metal, carbon, ceramic, and hybrid networks. By comparing the effects of different filler types and distribution on the composite materials, the advantages of 3D interconnected conductive networks in polymer composites are highlighted. Additionally, this review addresses the challenges faced in the field of multifunctional thermal management and electromagnetic protection materials and provides insights into future development trends and application prospects of 3D structured composites. [ABSTRACT FROM AUTHOR]

Digital light processing 3D printing can be applied to fabricate complex silicon nitride (Si 3 N 4) components. However, because of the surface hydroxyl groups and large refractive index, it is still a foremost challenge to realize a stable photosensitive Si 3 N 4 slurry with combined benefits of low viscosity and large curing depth. In this study, we propose a new formulation strategy to prepare Si 3 N 4 slurry. Starting from the optimization of monomer ratio, we have systematically optimized powder particle size, dispersant and photoinitiator on the rheological properties and curing properties of Si 3 N 4 slurry. Specifically, we have fabricated a stable photosensitive Si 3 N 4 slurry (48 vol%) with a viscosity of 2.09 Pa s (30 s−1), a critical curing energy of 126.09 mJ/cm2 and a maximum curing depth of 80 µm. Finally, based on this optimized slurry, we have successfully obtained complex Si 3 N 4 green body with no defect, which demonstrates great potential to fabricate arbitrary complex ceramic components for various applications. [ABSTRACT FROM AUTHOR]

• MXene/AgNWs aerogels with interpenetrating double-network structure were fabricated. • The porous structure contributes to higher attenuation of electromagnetic waves. • 3D network provides channel for electron and phonon transmission in epoxy composites. • The composites possess remarkable EMI SE and thermal conductivity. The novel multifunctional materials with anti-electromagnetic interference (EMI) and effective thermal management are ideal for modern electronic industry. Generally, the EMI shielding effectiveness (SE) and thermal conductivity (TC) of materials can be effectively enhanced by compounding with high electrically and thermally conductive fillers. However, it seems that the high-performance cannot be compensated without sacrificing the high fillers loading. Herein, from one-dimensional silver nanowires (AgNWs) and two-dimensional MXene, three-dimensional MXene/AgNWs aerogels were designed as electric and heat transferring skeletons for epoxy nanocomposites by directional-freezing and freeze-drying methods. The resultant MXene/AgNWs/Epoxy nanocomposites with a low MXene/AgNWs content of 8.2 wt% combine a high electrical conductivity of 1532 S/m, and an exceptional EMI SE value of 94.1 dB with 3 mm thickness at the X-band frequency, as well as an improved TC of 2.34 W/m·K. The fabricated MXene/AgNWs/Epoxy nanocomposites possess excellent comprehensive properties enable valuable applications in electronic devices for EMI shielding and thermal management. [ABSTRACT FROM AUTHOR]

In ternary nitrides, the Ga0.9Fe3.1N sample has ultimately been prepared through solid‐gas preparation for the gallium‐richest phase GaFe3N. The substitution of gallium atoms for iron atoms weakens the saturation magnetization of ferromagnetic γʹ‐Fe4N and induces the transmission from ferromagnetism to antiferromagnetism. A new magnetic behavior, defined as the spin glassy magnetic state, has been observed in the temperature‐dependent magnetic performance measurement process for Ga0.9Fe3.1N. The magnetic competition between ferromagnetic and antiferromagnetic Fe–Fe bonds will lead to the spin frustration of the magnetic system. And even the positional disorders caused by substitution, will all be responsible for the spin glassy behavior in Ga0.9Fe3.1N. [ABSTRACT FROM AUTHOR]

Nano-SiO 2 porous thermal insulating material (TIM) has drawn tremendous research interests due to its advantages of low density, high porosity and low thermal conductivity. However, its long-term stability in humid environment can be severely deteriorated by the high hydrophilicity resulting from tetrahedral coordination of oxygen and capillary effect of porous structure. It is still a great challenge to cost-effectively fabricate bulk TIM with superior hydrophobicity and consequent remarkable self-cleaning capability. Herein, via an oil-in-water microemulsion treatment, we have proposed a new strategy to construct 3D superior hydrophobic nano-SiO 2 porous TIM. The polymethylhydrosiloxane-modified TIM exhibits a large water contact angle of 166°, and corresponding excellent self-cleaning characteristic while maintaining low thermal conductivity of 0.031 W/m·K. Moreover, our high hydrophobicity of TIM exhibits excellent durability under high temperature up to 400 °C, high humidity of 100%, and chemical erosions. Detailed knowledge of the physical chemistry basis of the superior hydrophobic nano-SiO 2 porous TIM can provide great opportunity to fabricate advanced self-cleaning and heat insulating devices especially targeted for harsh environments. [ABSTRACT FROM AUTHOR]

Choledochal cysts (CCs) are an important risk factor for cholangiocarcinoma, though their etiology remains debated. Given the vital role of bile fluid in digestive processes within the biliary system, examining such mechanisms from the perspective of bile fluid dynamics may offer additional insights for clinical use. This study utilized magnetic resonance imaging (MRI)-based patient-specific scans for detailed reconstruction and further employed the computational fluid dynamic method to assess the physiological functions of each system, including refilling and emptying processes. The impact of bile rheological property was also examined. Key biomechanical parameters—pressure and wall shear stress (WSS)—were displayed on a two-dimensional plane via surface mapping for enhanced visualization and comparative analysis. Outcomes demonstrated a significant reduction in bile flow velocity in CCs patients due to common bile duct's anatomical features and bile's shear-thinning, non-Newtonian nature, with a notable increase in pressure drop observed. In healthy biliary systems, WSS variations were minimal; however, in CCs patients, extreme WSS differences were found, with the highest WSS in the segmental bile duct and the lowest in the dilatation area, presenting a magnitude difference of approximately 1000. CCs one showed WSS levels 100–250 times higher than healthy ones in the common bile duct. Bile rheological properties substantially affect pressure and WSS patterns, particularly WSS, where pathological bile caused a tenfold increase in WSS compared to healthy bile. The findings aimed to enhance the understanding of biliary fluid mechanics in CCs and offer insights into selected fluidic variables for future microfluidic chip experiments. [ABSTRACT FROM AUTHOR]

The high integration density of microelectronic devices leads to local heat accumulation, and effective heat dissipation and signal transmission of packaging materials have become the primary issues to be solved. However, existing polymer materials have difficulty meeting the requirements due to their unsatisfactory thermal conductivity and thermal expansion properties. In this work, we proposed the use of digital light processing (DLP) printing technology to construct a triply periodic minimum surface (TPMS) skeleton, and a continuous and efficient heat conduction path was successfully constructed in epoxy resin by impregnating h-BN on the skeleton surface. When the loading of h-BN was 20 vol%, the thermal conductivity of the TPMS(SiO 2)@BN/EP(BN) composites was 1.86 W/(m·K), which was 786 % higher than that of pure epoxy resin. In addition, the thermal expansion coefficient of the composites decreased by more than 70 %. At the test frequencies of 3∼10 MHz, the composites showed stable dielectric properties, and the dielectric constant was always maintained in a low range, between 3.85 and 4.15. This work has realized the transformation of the method for constructing a heat conduction path from disordered to ordered and from random to repeatable. This provides a new strategy for the selection of microelectronic packaging materials. [ABSTRACT FROM AUTHOR]

Purpose: 18F-FDG PET/MR has been applied to the diagnosis and preoperative staging in various tumor types; however, reports using PET/MR in hilar cholangiocarcinoma (HCCA) are rare. We investigated the value of PET/MR for preoperative staging and compared it with PET/CT in HCCA. Methods: Fifty-eight patients with HCCA confirmed by pathology were retrospectively analyzed. 18F-FDG PET/CT imaging was performed first, followed with whole-body PET/MR imaging. SUVmax of tumor and normal liver tissue were measured. Paired T test was used to compare SUVmax of tumor and normal liver tissue of PET/CT and PET/MR. In addition, McNemar test was used to compare the accuracy of TNM staging and Bismuth-Corlette typing between PET/CT and PET/MR. Results: There was no significant difference in SUVmax between PET/CT and PET/MR in primary tumor lesions (6.6 ± 5.5 vs. 6.8 ± 6.2, P = 0.439). SUVmax of PET/CT and PET/MR in normal liver parenchyma was significantly different (3.0 ± 0.5 vs. 2.1 ± 0.5, P < 0.001). The accuracy of PET/MR in diagnosing T staging and N staging was significantly higher than those of PET/CT (72.4% vs. 58.6%, P = 0.022 and 84.5% vs. 67.2%, P = 0.002). There was no significant difference between PET/CT and PET/MR in M staging (94.8% vs. 98.3%, P = 0.5). The classification accuracy of PET/MR in Bismuth-Corlette was significantly higher than that of PET/CT (89.7% vs. 79.3%), P = 0.031. Conclusions: The diagnostic accuracy of 18F-FDG PET/MR was superior to that of PET/CT in preoperative T staging, N staging, and Bismuth–Corlette classification of HCCA. In M staging, the diagnostic accuracy of PET/MR was similar to that of PET/CT. [ABSTRACT FROM AUTHOR]

Organoids refer to 3D cultures established to recapitulate histology, pathology, architecture, and genetic traits of various organs and tissues in the body, thereby replacing 2D cell cultures, xenograft, and animal models. Organoids form a 3D in vitro mimic of original tissues like the liver and are derived from embryonic or adult tissue stem cells. Liver and bile duct tumor organoids, also called, tumoroids capture genetic diversity, cellular, and pathophysiological properties of original tumors. Moreover, co-culture techniques along with genetic modulation of organoids allow for using tumoroids in liver and bile duct cancer research and drug screening/testing. Therefore, tumoroids are promising platforms for studying liver and bile duct cancer, which paves the way for the new era of personalized therapies. In the current review, we aimed to discuss liver and bile duct organoids with special emphasis on tumoroids and their applications, advantages, and shortcomings. [ABSTRACT FROM AUTHOR]

Background: The efficacy of preoperative biliary drainage (PBD) has been debated for several decades, and yet indications for PBD remain controversial. The aim of this study was to compare the postoperative morbidity and mortality in patients with malignant obstructive jaundice undergoing direct surgery versus surgery with PBD. Methods: All consecutive patients with malignant obstructive jaundice who underwent radical resection between June 2017 and December 2019 at Zhongshan Hospital were analyzed retrospectively. The study population was divided into two groups: PBD group (PG) and direct surgery group (DG). The subgroups were chosen based on the site of obstruction. Perioperative indicators and postoperative complications were compared and analyzed. Results: A total of 290 patients were analyzed. Postoperative complications occurred in 134 patients (46.4%). Patients in the PG group had a lower overall rate of postoperative complications compared with the DG group, with perioperative total bilirubin (TB) identified as an independent risk factor in multivariate analysis (hazard ratio = 1.004; 95% confidence interval 1.001–1.007; P = 0.017). Subgroup analysis showed that PBD reduced the complication rate in patients with proximal obstruction. In the proximal-obstruction subgroup, a preoperative TB level > 162 μmol/L predicted postoperative complications. Conclusions: PBD may reduce the overall rate of postoperative complications among patients with proximal malignant obstructive jaundice. Trial registration: ClinicalTrials.gov, 2018ZSLC 24. Registered May 17, 2018, https://clinicaltrials.gov/. [ABSTRACT FROM AUTHOR]

14-3-3 proteins are ubiquitous adapters combining with phosphorylated serine/threonine motifs to regulate multiple cellular processes. As a negative regulator, 14-3-3 proteins could sequester the phosphorylated YAP1 in cytoplasm to inhibit its activity. In this study, we identified the K50 acetylation (K50ac) of 14-3-3ε protein and investigated its roles and mechanism in cholangiocarcinoma progression. The NAD (+)-dependent protein deacetylases inhibitor, NAM treatment significantly up-regulated the K50ac of 14-3-3ε. K50R mutation resulted in the decrease of K50ac of 14-3-3ε. The K50ac of 14-3-3ε was reversibly mediated by PCAF acetyltransferase and sirt1 deacetylases. K50ac had no obvious effect on the protein stability of 14-3-3ε, but inhibited the combination of 14-3-3ε with phosphorylated YAP1, which resulted in the activation of YAP1 in cholangiocarcinoma. K50R significantly decreased cholangiocarcinoma cell proliferation in vitro and the growth of tumor xenograft in vivo compared with WT (wild type) 14-3-3ε. The level of K50ac were higher in cholangiocarcinoma tissues accompanied by the accumulation of YAP1 in nuclear than para-carcinoma tissues. Our study revealed the underlying mechanism of K50ac of 14-3-3ε and its roles in cholangiocarcinoma, providing a potential targeting for cholangiocarcinoma therapy. [ABSTRACT FROM AUTHOR]