Search

A new harmonic power standard has been developed at the National Institute of Metrology (NIM), Beijing, China, for the calibration of harmonic power analyzers under nonsinusoidal conditions at fundamental frequencies of 50 and 60 Hz. The standard is based on digital sampling techniques that do not require synchronization. A compensation algorithm is presented in this paper. A new definition of the uncertainty for harmonic measurement is proposed that is referred to the fundamental. A characterization signal and its application are introduced. Results have shown that over its operating range of up to 50 A, 500 V, and the sixtieth-order harmonic, the harmonic power standard has uncertainties (k = 2) of less than 30 μV/V, 36 μA/A, and 42 μW/VA for voltage, current, and power measurements, respectively. [ABSTRACT FROM AUTHOR]

Digital terrestrial multimedia/television broadcasting (DTMB), which is the recently released Chinese digital television terrestrial broadcasting (DTTB) standard, uses guard intervals padded with known pseudo-noise (PN) sequences for multi-carrier or single-carrier block transmission. Well designed synchronization algorithms are a prerequisite for achieving high-quality multimedia transmission. In this paper, a novel frame synchronization technique, which is robust to carrier frequency offset (CFO), is proposed for DTMB systems. This technique is derived through segmenting the local PN sequence into M contiguous blocks and performing multiple cross-correlations with the received signal. The metric for peak detection is defined as the non-coherent summation of the M cross-correlation magnitude outputs. Moreover, a low-complexity frame synchronizer based on segment-based full correlation for PN420 mode in DTMB system is proposed. It is shown through computer simulation that the proposed techniques generally outperform the conventional ones when CFO occurs, over both AWGN and frequency-selective fading channels. For a DTMB system using PN420 mode, the maximal allowed CFO to keep system still working normally of our proposed schemes are more than 3 times larger than that of the conventional method. [ABSTRACT FROM AUTHOR]