Search

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a “dying” paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing “offspring”. Practically, this might be used to trace the successive published milestones of a research field. [ABSTRACT FROM AUTHOR]

Past research on the process of extinguishing a fire typically used a traditional linear water jet falling point model and the results ignored external factors, such as environmental conditions and the status of the fire engine, even though the water jet falling point location prediction was often associated with these parameters and showed a nonlinear relationship. This paper constructed a BP (Back Propagation) neural network model. The fire gun nozzle characteristics were included as model inputs, and the water discharge point coordinates were the model outputs; thus, the model could precisely predict the water discharge point with small error and high precision to determine an accurate firing position and allow for the timely adjustment of the spray gun. To improve the slow convergence and local optimality problems of the BP neural network (BPNN), this paper further used a genetic algorithm to optimize the BPNN (GA-BPNN). The BPNN can be used to optimize the weights in the network to train them for global optimization. A genetic algorithm was introduced into the neural network approach, and the water jet landing prediction model was further improved. The simulation results showed that the prediction accuracy of the GA-BP model was better than that of the BPNN alone. The established model can accurately predict the location of the water jet, making the prediction results more useful for firefighters. [ABSTRACT FROM AUTHOR]

Several lifetime distributions have played an important role to fit survival data. However, for some of these models, the computation of maximum likelihood estimators is quite difficult due to presence of flat regions in the search space, among other factors. Several well-known derivative-based optimization tools are unsuitable for obtaining such estimates. To circumvent this problem, we introduce the AdequacyModel computational library version 2.0.0 for the R statistical environment with two major contributions: a general optimization technique based on the Particle Swarm Optimization (PSO) method (with a minor modification of the original algorithm) and a set of statistical measures for assessment of the adequacy of the fitted model. This library is very useful for researchers in probability and statistics and has been cited in various papers in these areas. It serves as the basis for the Newdistns library (version 2.1) published in an impact journal in the area of computational statistics, see . It is also the basis of the Wrapped library (version 2.0), see . A third package making use of the AdequacyModel library can be found in . In addition, the proposed library has proved to be very useful for maximizing log-likelihood functions with complex search regions. The library provides a greater control of the optimization process by introducing a stop criterion based on a minimum number of iterations and the variance of a given proportion of optimal values. We emphasize that the new library can be used not only in statistics but in physics and mathematics as proved in several examples throughout the paper. [ABSTRACT FROM AUTHOR]

Computational modeling of engineered gene circuits is an important while challenged task in systems biology. In order to describe and predict the response behaviors of genetic circuits using reliable model parameters, this paper applies an optimal experimental design(OED) method to obtain input signals. In order to obtain informative observations, this study focuses on maximizing Fisher information matrix(FIM)-based optimal criteria and to provide optimal inputs. Furthermore, this paper designs a two-stage optimization with the modified E-optimal criteria and applies harmony search(HS)-based OED algorithm to minimize estimation errors. The proposed optimal identification methodology involves estimation errors and the sample size to pursue a trade-off between estimation accuracy and measurement cost in modeling gene networks. The designed cost function takes two major factors into account, in which experimental costs are proportional to the number of time points. Experiments select two types of synthetic genetic networks to validate the effectiveness of the proposed HS-OED approach. Identification outcomes and analysis indicate the proposed HS-OED method outperforms two candidate OED approaches, with reduced computational effort. [ABSTRACT FROM AUTHOR]

In a recidivism prediction context, there is no consensus on which modeling strategy should be followed for obtaining an optimal prediction model. In previous papers, a range of statistical and machine learning techniques were benchmarked on recidivism data with a binary outcome. However, two important tree ensemble methods, namely gradient boosting and random forests were not extensively evaluated. In this paper, we further explore the modeling potential of these techniques in the binary outcome criminal prediction context. Additionally, we explore the predictive potential of classical statistical and machine learning methods for censored time-to-event data. A range of statistical manually specified statistical and (semi-)automatic machine learning models is fitted on Dutch recidivism data, both for the binary outcome case and censored outcome case. To enhance generalizability of results, the same models are applied to two historical American data sets, the North Carolina prison data. For all datasets, (semi-) automatic modeling in the binary case seems to provide no improvement over an appropriately manually specified traditional statistical model. There is however evidence of slightly improved performance of gradient boosting in survival data. Results on the reconviction data from two sources suggest that both statistical and machine learning should be tried out for obtaining an optimal model. Even if a flexible black-box model does not improve upon the predictions of a manually specified model, it can serve as a test whether important interactions are missing or other misspecification of the model are present and can thus provide more security in the modeling process. [ABSTRACT FROM AUTHOR]

This paper proposes a mixture regression model-based method for drug sensitivity prediction. The proposed method explicitly addresses two fundamental issues in drug sensitivity prediction, namely, population heterogeneity and feature selection pertaining to each of the subpopulations. The mixture regression model is estimated using the imputation-conditional consistency algorithm, and the resulting estimator is consistent. This paper also proposes an average-BIC criterion for determining the number of components for the mixture regression model. The proposed method is applied to the CCLE dataset, and the numerical results indicate that the proposed method can make a drastic improvement over the existing ones, such as random forest, support vector regression, and regularized linear regression, in both drug sensitivity prediction and feature selection. The p-values for the comparisons in drug sensitivity prediction can reach the order O(10−8) or lower for the drugs with heterogeneous populations. [ABSTRACT FROM AUTHOR]

This paper, based on differential privacy protecting K-means clustering algorithm, realizes privacy protection by adding data-disturbing Laplace noise to cluster center point. In order to solve the problem of Laplace noise randomness which causes the center point to deviate, especially when poor availability of clustering results appears because of small privacy budget parameters, an improved differential privacy protecting K-means clustering algorithm was raised in this paper. The improved algorithm uses the contour coefficients to quantitatively evaluate the clustering effect of each iteration and add different noise to different clusters. In order to be adapted to the huge number of data, this paper provides an algorithm design in MapReduce Framework. Experimental finding shows that the new algorithm improves the availability of the algorithm clustering results under the condition of ensuring individual privacy without significantly increasing its operating time. [ABSTRACT FROM AUTHOR]

Recently, computational Grids have proven to be a good solution for processing large-scale, computation intensive problems. However, the heterogeneity, dynamics of resources and diversity of applications requirements have always been important factors affecting their performance. In response to these challenges, this work first builds a Grid job scheduling architecture that can dynamically monitor Grid computing center resources and make corresponding scheduling decisions. Second, a Grid job model is proposed to describe the application requirements. Third, this paper studies the characteristics of commercial interconnection networks used in Grids and forecast job transmission time. Fourth, this paper proposes an application-aware job scheduling mechanism (AJSM) that includes periodic scheduling flow and a heuristic application-aware deadline constraint job scheduling algorithm. The rigorous performance evaluation results clearly demonstrate that the proposed application-aware job scheduling mechanism can successful schedule more Grid jobs than the existing algorithms. For successful scheduled jobs, our proposed AJSM method is the best algorithm for job average processing time and makespan. [ABSTRACT FROM AUTHOR]

In this paper, a two-stage filter for removing salt-and-pepper noise using noise detector based on characteristic difference parameter and adaptive directional mean filter is proposed. The first stage firstly detects the noise corrupted pixels by combining characteristic difference parameter and gray level extreme, then develops an improved adaptive median filter to firstly restore them. The second stage introduces a restoration scheme to further restore the noise corrupted pixels, which firstly divides them into two types and then applies different restoration skills for the pixels based on the classification result. One type of pixels is restored by the mean filter and the other type of pixels is restored by the proposed adaptive directional mean filter. The new filter firstly adaptively selects the optimal filtering window and direction template, then replaces the gray level of noise corrupted pixel by the mean value of pixels on the optimal template. Experimental results show that the proposed filter outperforms many existing main filters in terms of noise suppression and detail preservation. [ABSTRACT FROM AUTHOR]

In clinical neuropsychology the cognitive abilities of neurological patients are commonly estimated using well-established paper-based tests. Typically, scores on some tests remain relatively well preserved, whilst others exhibit a significant and disproportionate decline. Scores on those tests that measure preserved cognitive functions (so-called ‘hold’ tests) may be used to estimate premorbid abilities, including scores in non-hold tests that would have been expected prior to the onset of cognitive impairment. Many hold tests entail word reading, with each word being graded as correctly or incorrectly pronounced. Inevitably, such tests are likely to contain words that provide little or no diagnostic power (i.e., can be eliminated without negatively affecting prediction accuracy). In this paper, a genetic algorithm is developed and demonstrated, using n = 92 neurologically healthy participants, to identify optimal word subsets from the National Adult Reading Test that minimize the mean error in predicting the most widely used clinical measure of IQ and cognitive ability, the Wechsler Adult Intelligence Scale Fourth Edition IQ. In addition to requiring only 17–20 of the original 50 words (suggesting that this test could be revised to be up to 66% shorter) and minimizing mean prediction error, the algorithm increases the proportion of the variance in the predicted variable explained in comparison to using all words (from r2 = 0.46 to r2 = 0.61). In a clinical setting this would improve estimates of premorbid cognitive function and, if an abbreviated revision to this test were to be adopted, reduce the arduousness of the test for patients. The proposed method is evaluated with jackknifing and leave one out cross validation. The general approach may be used to optimize the relationship between any two psychological tests by finding the question subset in one test that minimizes the prediction error in a second test by training the genetic algorithm using data collected from participants upon whom both tests have been administered. This approach may also be used to develop new predictive tests, since it provides a method to identify an optimal subset of a set of candidate questions (for which empirical data have been collected) that maximizes prediction accuracy and the proportion of variance in the predicted variable that can be explained. [ABSTRACT FROM AUTHOR]

Analyzing and predicting the trend of price fluctuation has been receiving more and more attention, as price risk has become the focus of risk control research in heating oil futures market. A novel time series prediction model combined with the complex network method is put forward in the paper. First of all, this paper counts the cumulative time interval of different nodes in the network, and fits its growth trend with the Fourier model. Then a novel price fluctuation prediction model is established based on the effective information such as some topology properties extracted from the network. The results show that the Fourier model can predict the emergence time of new nodes in the next stage, and the established price fluctuation prediction model can infer the names of nodes in the prediction interval, so as to determine the forward-looking behavior of price evolution. Besides, liken to the NAR neural network, the prediction results obtained by the proposed method also show superiority, which has important theoretical value and academic significance for early warning and prediction of price behavior in the heating oil futures market. [ABSTRACT FROM AUTHOR]

In this paper we introduce a novel algorithm, called Exogenous Fitness, to calculate the Fitness of subnational entities and we apply it to the states of Brazil. In the last decade, several indices were introduced to measure the competitiveness of countries by looking at the complexity of their export basket. Tacchella et al (2012) developed a non-monetary metric called Fitness. In this paper, after an overview about Brazil as a whole and the comparison with the other BRIC countries, we introduce a new methodology based on the Fitness algorithm, called Exogenous Fitness. Combining the results with the Gross Domestic Product per capita (GDPp), we look at the dynamics of the Brazilian states in the Fitness-Income plane. Two regimes are distinguishable: one with high predictability and the other with low predictability, showing a deep analogy with the heterogeneous dynamics of the World countries. Furthermore, we compare the ranking of the Brazilian states according to the Exogenous Fitness with the ranking obtained through two other techniques, namely Endogenous Fitness and Economic Complexity Index. [ABSTRACT FROM AUTHOR]

In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP) model, considering three discount (all-unit discount, incremental discount, total volume discount) offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction. [ABSTRACT FROM AUTHOR]

This paper presents an integrated hybrid optimization algorithm for training the radial basis function neural network (RBF NN). Training of neural networks is still a challenging exercise in machine learning domain. Traditional training algorithms in general suffer and trap in local optima and lead to premature convergence, which makes them ineffective when applied for datasets with diverse features. Training algorithms based on evolutionary computations are becoming popular due to their robust nature in overcoming the drawbacks of the traditional algorithms. Accordingly, this paper proposes a hybrid training procedure with differential search (DS) algorithm functionally integrated with the particle swarm optimization (PSO). To surmount the local trapping of the search procedure, a new population initialization scheme is proposed using Logistic chaotic sequence, which enhances the population diversity and aid the search capability. To demonstrate the effectiveness of the proposed RBF hybrid training algorithm, experimental analysis on publicly available 7 benchmark datasets are performed. Subsequently, experiments were conducted on a practical application case for wind speed prediction to expound the superiority of the proposed RBF training algorithm in terms of prediction accuracy. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]

Machine Learning (ML) methods have been proposed in the academic literature as alternatives to statistical ones for time series forecasting. Yet, scant evidence is available about their relative performance in terms of accuracy and computational requirements. The purpose of this paper is to evaluate such performance across multiple forecasting horizons using a large subset of 1045 monthly time series used in the M3 Competition. After comparing the post-sample accuracy of popular ML methods with that of eight traditional statistical ones, we found that the former are dominated across both accuracy measures used and for all forecasting horizons examined. Moreover, we observed that their computational requirements are considerably greater than those of statistical methods. The paper discusses the results, explains why the accuracy of ML models is below that of statistical ones and proposes some possible ways forward. The empirical results found in our research stress the need for objective and unbiased ways to test the performance of forecasting methods that can be achieved through sizable and open competitions allowing meaningful comparisons and definite conclusions. [ABSTRACT FROM AUTHOR]

In this paper, we propose a hybrid method to forecast the stock prices called High-order-fuzzy-fluctuation-Trends-based Back Propagation(HTBP)Neural Network model. First, we compare each value of the historical training data with the previous day's value to obtain a fluctuation trend time series (FTTS). On this basis, the FTTS blur into fuzzy time series (FFTS) based on the fluctuation of the increasing, equality, decreasing amplitude and direction. Since the relationship between FFTS and future wave trends is nonlinear, the HTBP neural network algorithm is used to find the mapping rules in the form of self-learning. Finally, the results of the algorithm output are used to predict future fluctuations. The proposed model provides some innovative features:(1)It combines fuzzy set theory and neural network algorithm to avoid overfitting problems existed in traditional models. (2)BP neural network algorithm can intelligently explore the internal rules of the actual existence of sequential data, without the need to analyze the influence factors of specific rules and the path of action. (3)The hybrid modal can reasonably remove noises from the internal rules by proper fuzzy treatment. This paper takes the TAIEX data set of Taiwan stock exchange as an example, and compares and analyzes the prediction performance of the model. The experimental results show that this method can predict the stock market in a very simple way. At the same time, we use this method to predict the Shanghai stock exchange composite index, and further verify the effectiveness and universality of the method. [ABSTRACT FROM AUTHOR]

With the development of computer network bandwidth, packet classification algorithms which are able to deal with large-scale rule sets are in urgent need. Among the existing algorithms, researches on packet classification algorithms based on hierarchical trie have become an important packet classification research branch because of their widely practical use. Although hierarchical trie is beneficial to save large storage space, it has several shortcomings such as the existence of backtracking and empty nodes. This paper proposes a new packet classification algorithm, Hierarchical Trie Algorithm Based on Expectation-Maximization Clustering (HTEMC). Firstly, this paper uses the formalization method to deal with the packet classification problem by means of mapping the rules and data packets into a two-dimensional space. Secondly, this paper uses expectation-maximization algorithm to cluster the rules based on their aggregate characteristics, and thereby diversified clusters are formed. Thirdly, this paper proposes a hierarchical trie based on the results of expectation-maximization clustering. Finally, this paper respectively conducts simulation experiments and real-environment experiments to compare the performances of our algorithm with other typical algorithms, and analyzes the results of the experiments. The hierarchical trie structure in our algorithm not only adopts trie path compression to eliminate backtracking, but also solves the problem of low efficiency of trie updates, which greatly improves the performance of the algorithm. [ABSTRACT FROM AUTHOR]

Slope one is a popular recommendation algorithm due to its simplicity and high efficiency for sparse data. However, it often suffers from under-fitting since the global information of all relevant users/items are considered. In this paper, we propose a new scheme called enhanced slope one recommendation through local information embedding. First, we employ clustering algorithms to obtain the user clusters as well as item clusters to represent local information. Second, we predict ratings using the local information of users and items in the same cluster. The local information can detect strong localized associations shared within clusters. Third, we design different fusion approaches based on the local information embedding. In this way, both under-fitting and over-fitting problems are alleviated. Experiment results on the real datasets show that our approaches defeats slope one in terms of both mean absolute error and root mean square error. [ABSTRACT FROM AUTHOR]

In recent years, with the development of computer science, deep learning is held as competent enough to solve the problem of inference and learning in high dimensional space. Therefore, it has received unprecedented attention from both the academia and the business community. Compared with CPU/GPU, FPGA has attracted much attention for its high-energy efficiency, short development cycle and reconfigurability in the aspect of deep learning algorithm. However, because of the limited research on OpenCL optimization on FPGA of deep learning algorithms, OpenCL tools and models applied to CPU/GPU cannot be directly used on FPGA. This makes it difficult for software programmers to use FPGA when implementing deep learning algorithms for a rewarding performance. To solve this problem, this paper proposed an OpenCL computational model based on FPGA template architecture to optimize the time-consuming convolution layer in deep learning. The comparison between the program applying the computational model and the corresponding optimization program provided by Xilinx indicates that the former is 8-40 times higher than the latter in terms of performance. [ABSTRACT FROM AUTHOR]

Sensor network intrusion detection has attracted extensive attention. However, previous intrusion detection methods face the highly imbalanced attack class distribution problem, and they may not achieve a satisfactory performance. To solve this problem, we propose a new intrusion detection algorithm based on normalized cut spectral clustering for sensor network in this paper. The main aim is to reduce the imbalance degree among classes in an intrusion detection system. First, we design a normalized cut spectral clustering to reduce the imbalance degree between every two classes in the intrusion detection data set. Second, we train a network intrusion detection classifier on the new data set. Finally, we do extensive experiments and analyze the experimental results in detail. Simulation experiments show that our algorithm can reduce the imbalance degree among classes and reserves the distribution of the original data on the one hand, and improve effectively the detection performance on the other hand. [ABSTRACT FROM AUTHOR]

Temporal hierarchies have been widely used during the past few years as they are capable to provide more accurate coherent forecasts at different planning horizons. However, they still display some limitations, being mainly subject to the forecasting methods used for generating the base forecasts and the particularities of the examined series. This paper deals with such limitations by considering three different strategies: (i) combining forecasts of multiple methods, (ii) applying bias adjustments and (iii) selectively implementing temporal hierarchies to avoid seasonal shrinkage. The proposed strategies can be applied either separately or simultaneously, being complements to the method considered for reconciling the base forecasts and completely independent from each other. Their effect is evaluated using the monthly series of the M and M3 competitions. The results are very promising, displaying lots of potential for improving the performance of temporal hierarchies, both in terms of accuracy and bias. [ABSTRACT FROM AUTHOR]

Cancer driver genes, i.e., oncogenes and tumor suppressor genes, are involved in the acquisition of important functions in tumors, providing a selective growth advantage, allowing uncontrolled proliferation and avoiding apoptosis. It is therefore important to identify these driver genes, both for the fundamental understanding of cancer and to help finding new therapeutic targets or biomarkers. Although the most frequently mutated driver genes have been identified, it is believed that many more remain to be discovered, particularly for driver genes specific to some cancer types. In this paper, we propose a new computational method called LOTUS to predict new driver genes. LOTUS is a machine-learning based approach which allows to integrate various types of data in a versatile manner, including information about gene mutations and protein-protein interactions. In addition, LOTUS can predict cancer driver genes in a pan-cancer setting as well as for specific cancer types, using a multitask learning strategy to share information across cancer types. We empirically show that LOTUS outperforms five other state-of-the-art driver gene prediction methods, both in terms of intrinsic consistency and prediction accuracy, and provide predictions of new cancer genes across many cancer types. [ABSTRACT FROM AUTHOR]

Background: This paper is aimed to (i) develop an innovative classification of COPD, multi-dimensional phenotype, based on a multidimensional assessment; (ii) describe the identified multi-dimensional phenotypes. Methods: An exploratory factor analysis to identify the main classificatory variables and, then, a cluster analysis based on these variables were run to classify the COPD-diagnosed 514 patients enrolled in the STORICO (trial registration number: NCT03105999) study into multi-dimensional phenotypes. Results: The circadian rhythm of symptoms and health-related quality of life, but neither comorbidity nor respiratory function, qualified as primary classificatory variables. Five multidimensional phenotypes were identified: the MILD COPD characterized by no night-time symptoms and the best health status in terms of quality of life, quality of sleep, level of depression and anxiety, the MILD EMPHYSEMATOUS with prevalent dyspnea in the early-morning and day-time, the SEVERE BRONCHITIC with nocturnal and diurnal cough and phlegm, the SEVERE EMPHYSEMATOUS with nocturnal and diurnal dyspnea and the SEVERE MIXED COPD distinguished by higher frequency of symptoms during 24h and worst quality of life, of sleep and highest levels of depression and anxiety. Conclusions: Our results showed that properly collected respiratory symptoms play a primary classificatory role of COPD patients. The longitudinal observation will disclose the discriminative and prognostic potential of the proposed multidimensional phenotype. Trial registration: Trial registration number: , date of registration: 10th April 2017. [ABSTRACT FROM AUTHOR]

Filter or screening methods are often used as a preprocessing step for reducing the number of variables used by a learning algorithm in obtaining a classification or regression model. While there are many such filter methods, there is a need for an objective evaluation of these methods. Such an evaluation is needed to compare them with each other and also to answer whether they are at all useful, or a learning algorithm could do a better job without them. For this purpose, many popular screening methods are partnered in this paper with three regression learners and five classification learners and evaluated on ten real datasets to obtain accuracy criteria such as R-square and area under the ROC curve (AUC). The obtained results are compared through curve plots and comparison tables in order to find out whether screening methods help improve the performance of learning algorithms and how they fare with each other. Our findings revealed that the screening methods were useful in improving the prediction of the best learner on two regression and two classification datasets out of the ten datasets evaluated. [ABSTRACT FROM AUTHOR]

In this paper, from the practical point of view, we focus on modeling traumatic brain injury data considering different stages of hospitalization, related to patients’ survival rates following traumatic brain injury caused by traffic accidents. From the statistical point of view, the primary objective is related to overcoming the limited number of traumatic brain injury patients available for studying by considering different estimation methods to obtain improved estimators of the model parameters, which can be recommended to be used in the presence of small samples. To have a general methodology, at least in principle, we consider the very flexible Generalized Gamma distribution. We compare various estimation methods using extensive numerical simulations. The results reveal that the penalized maximum likelihood estimators have the smallest mean square errors and biases, proving to be the most efficient method among the investigated ones, mainly to be used in the presence of small samples. The Simulated Annealing technique is used to avoid numerical problems during the optimization process, as well as the need for good initial values. Overall, we considered an amount of three real data sets related to traumatic brain injury caused by traffic accidents to demonstrate that the Generalized Gamma distribution is a simple alternative to be used in this type of applications for different occurrence rates and risks, and in the presence of small samples. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new approach for learning node embeddings for weighted undirected networks. We perform a random walk on the network to extract the latent structural information and perform node embedding learning under a similarity-based framework. Unlike previous works, we apply a different criterion to capture the proximity information between nodes in a network, and use it for improved modeling of similarities between nodes. We show that the mean commute time (MCT) between two nodes, defined as the average time a random walker takes to reach a target node and return to the source, plays a crucial role in quantifying the actual degree of proximity between two nodes of the network. We then introduce a novel definition of a similarity matrix that is based on the pair-wise mean commute time captured, which enables us to adequately represent the connection of similar nodes. We utilize pseudoinverse of the Laplacian matrix of the graph for calculating such a proximity measure, capturing rich structural information out of the graph for learning more adequate node representations of a network. The results of different experiments on three real-world networks demonstrate that our proposed method outperforms existing related efforts in classification, clustering, visualization as well as link prediction tasks. [ABSTRACT FROM AUTHOR]

While there have been many studies using machine learning (ML) algorithms to predict process outcomes and device performance in semiconductor manufacturing, the extensively developed technology computer-aided design (TCAD) physical models should play a more significant role in conjunction with ML. While TCAD models have been effective in predicting the trends of experiments, a machine learning statistical model is more capable of predicting the anomalous effects that can be dependent on the chambers, machines, fabrication environment, and specific layouts. In this paper, we use an analytics-statistics mixed training (ASMT) approach using TCAD. Under this method, the TCAD models are incorporated into the machine learning training procedure. The mixed dataset with the experimental and TCAD results improved the prediction in terms of accuracy. With the application of ASMT to the BOSCH process, we show that the mean square error (MSE) can be effectively decreased when the analytics-statistics mixed training (ASMT) scheme is used instead of the classic neural network (NN) used in the baseline study. In this method, statistical induction and analytical deduction can be combined to increase the prediction accuracy of future intelligent semiconductor manufacturing. [ABSTRACT FROM AUTHOR]

As the location trajectory contains more spatial-temporal information about the user, it will be even dangerous for jeopardizing the privacy of the user. In order to cope with the correlation, an algorithm that utilizes the query division had been proposed. In this algorithm, random blocks of query context was used, so as the adversary was obfuscated and difficult to correlate the real result. However, this algorithm fails to dispose the size of each query block, as once same size blocks were obtained by the adversary continuously, so the adversary can regard them as blocks from the same query context, and then obtains the query context to correlate the discrete locations. In view of above conditions, in this paper we propose a fine granularity block division algorithm based on the conception of granularity measurement as well as granularity layer division, so with the help of collaborative users the location privacy of the user will be protected. In this algorithm, the query context will be divided into fine granularity size of information blocks that difficult to be distinguished with others, and then these blocks will be exchanged with other collaborative users to eliminate the difference in block size. In addition, as each block is divided into fine granularity size, the adversary will be difficult to correlate the discrete locations into location trajectory, so the location privacy will be protected. At last, through security analysis and experimental verification, this granularity indistinguishable algorithm is analyzed and verified at both theoretical and practical levels, which further demonstrate the superiority of the proposed algorithm compared with other similar algorithms. [ABSTRACT FROM AUTHOR]

In this paper, we propose a human action recognition method using HOIRM (histogram of oriented interest region motion) feature fusion and a BOW (bag of words) model based on AP (affinity propagation) clustering. First, a HOIRM feature extraction method based on spatiotemporal interest points ROI is proposed. HOIRM can be regarded as a middle-level feature between local and global features. Then, HOIRM is fused with 3D HOG and 3D HOF local features using a cumulative histogram. The method further improves the robustness of local features to camera view angle and distance variations in complex scenes, which in turn improves the correct rate of action recognition. Finally, a BOW model based on AP clustering is proposed and applied to action classification. It obtains the appropriate visual dictionary capacity and achieves better clustering effect for the joint description of a variety of features. The experimental results demonstrate that by using the fused features with the proposed BOW model, the average recognition rate is 95.75% in the KTH database, and 88.25% in the UCF database, which are both higher than those by using only 3D HOG+3D HOF or HOIRM features. Moreover, the average recognition rate achieved by the proposed method in the two databases is higher than that obtained by other methods. [ABSTRACT FROM AUTHOR]

This paper attempts to design an automated, efficient and intelligent tomato grading method that facilitates the graded selling of the fruit. Based on machine vision, the color images of tomatoes with different morphologies were studied, and the color, shape and size were selected as the key features. On this basis, an automated grading classifier was created based on the surface features of tomatoes, and a grading platform was set up to verify the effect of the classifier. Specifically, the Hue value distributions of tomatoes with different maturities were investigated, and the Hue value ranges were determined for mature, semi-mature and immature tomatoes, producing the color classifier. Next, the first-order Fourier descriptor (1D- FD) was adopted to describe the radius sequence of tomato contour, and an equation was established to compute the irregularity of tomato contour, creating the shape classifier. After that, a linear regression equation was constructed to reflect the relationship between the transverse diameters of actual tomatoes and tomato images, and a classifier between large, medium and small tomatoes was produced based on the transverse diameter. Finally, a comprehensive tomato classifier was built based on the color, shape and size diameters. The experimental results show that the mean grading accuracy of the proposed method was 90.7%. This means our method can achieve automated real-time grading of tomatoes. [ABSTRACT FROM AUTHOR]

In this paper, we explore the (in)efficiency of the continuum Bitcoin-USD market in the period ranging from mid 2010 to early 2019. To deal with, we dynamically analyse the evolution of the self-similarity exponent of Bitcoin-USD daily returns via accurate FD4 approach by a 512 day sliding window with overlapping data. Further, we define the memory indicator by the difference between the self-similarity exponent of Bitcoin-USD series and the self-similarity index of its shuffled series. We also carry out additional analyses via FD4 approach by sliding windows of sizes equal to 64, 128, 256, and 1024 days, and also via FD algorithm for values of q equal to 1 and 2 (and sliding windows equal to 512 days). Moreover, we explored the evolution of the self-similarity exponent of actual S&P500 series via FD4 algorithm by sliding windows of sizes equal to 256 and 512 days. In all the cases, the obtained results were found to be similar to our first analysis. We conclude that the self-similarity exponent of the BTC-USD (resp., S&P500) series stands above 0.5. However, this is not due to the presence of significant memory in the series but to its underlying distribution. In fact, it holds that the self-similarity exponent of BTC-USD (resp., S&P500) series is similar or lower than the self-similarity index of a random series with the same distribution. As such, several periods with significant antipersistent memory in BTC-USD (resp., S&P500) series are distinguished. [ABSTRACT FROM AUTHOR]

Nearly 1% of the global population has Epilepsy. Forecasting epileptic seizures with an acceptable confidence level, could improve the disease treatment and thus the lifestyle of the people who suffer it. To do that the electroencephalogram (EEG) signal is usually studied through spectral power band filtering, but this paper proposes an alternative novel method of preprocessing the EEG signal based on supervised filters. Such filters have been employed in a machine learning algorithm, such as the K-Nearest Neighbor (KNN), to improve the prediction of seizures. The proposed solution extends with this novel approach an algorithm that was submitted to win the third prize of an international Data Science challenge promoted by Kaggle contest platform and the American Epilepsy Society, the Epilepsy Foundation, National Institutes of Health (NIH) and Mayo Clinic. A formal description of these preprocessing methods is presented and a detailed analysis in terms of Receiver Operating Characteristics (ROC) curve and Area Under ROC curve is performed. The obtained results show statistical significant improvements when compared with the spectral power band filtering (PBF) typical baseline. A trend between performance and the dataset size is observed, suggesting that the supervised filters bring better information, compared to the conventional PBF filters, as the dataset grows in terms of monitored variables (sensors) and time length. The paper demonstrates a better accuracy in forecasting when new filters are employed and its main contribution is in the field of machine learning algorithms to develop more accurate predictive systems. [ABSTRACT FROM AUTHOR]

The estimation of the correct number of dimensions is a long-standing problem in psychometrics. Several methods have been proposed, such as parallel analysis (PA), Kaiser-Guttman’s eigenvalue-greater-than-one rule, multiple average partial procedure (MAP), the maximum-likelihood approaches that use fit indexes as BIC and EBIC and the less used and studied approach called very simple structure (VSS). In the present paper a new approach to estimate the number of dimensions will be introduced and compared via simulation to the traditional techniques pointed above. The approach proposed in the current paper is called exploratory graph analysis (EGA), since it is based on the graphical lasso with the regularization parameter specified using EBIC. The number of dimensions is verified using the walktrap, a random walk algorithm used to identify communities in networks. In total, 32,000 data sets were simulated to fit known factor structures, with the data sets varying across different criteria: number of factors (2 and 4), number of items (5 and 10), sample size (100, 500, 1000 and 5000) and correlation between factors (orthogonal, .20, .50 and .70), resulting in 64 different conditions. For each condition, 500 data sets were simulated using lavaan. The result shows that the EGA performs comparable to parallel analysis, EBIC, eBIC and to Kaiser-Guttman rule in a number of situations, especially when the number of factors was two. However, EGA was the only technique able to correctly estimate the number of dimensions in the four-factor structure when the correlation between factors were .7, showing an accuracy of 100% for a sample size of 5,000 observations. Finally, the EGA was used to estimate the number of factors in a real dataset, in order to compare its performance with the other six techniques tested in the simulation study. [ABSTRACT FROM AUTHOR]

Localization of the wireless sensor network is a vital area acquiring an impressive research concern and called upon to expand more with the rising of its applications. As localization is gaining prominence in wireless sensor network, it is vulnerable to jamming attacks. Jamming attacks disrupt communication opportunity among the sender and receiver and deeply impact the localization process, leading to a huge error of the estimated sensor node position. Therefore, detection and elimination of jamming influence are absolutely indispensable. Range-based techniques especially Received Signal Strength (RSS) is facing severe impact of these attacks. This paper proposes algorithms based on Combination Multiple Frequency Multiple Power Localization (C-MFMPL) and Step Function Multiple Frequency Multiple Power Localization (SF-MFMPL). The algorithms have been tested in the presence of multiple types of jamming attacks including capture and replay, random and constant jammers over a log normal shadow fading propagation model. In order to overcome the impact of random and constant jammers, the proposed method uses two sets of frequencies shared by the implemented anchor nodes to obtain the averaged RSS readings all over the transmitted frequencies successfully. In addition, three stages of filters have been used to cope with the replayed beacons caused by the capture and replay jammers. In this paper the localization performance of the proposed algorithms for the ideal case which is defined by without the existence of the jamming attack are compared with the case of jamming attacks. The main contribution of this paper is to achieve robust localization performance in the presence of multiple jamming attacks under log normal shadow fading environment with a different simulation conditions and scenarios. [ABSTRACT FROM AUTHOR]

Leveraging smart metering solutions to support energy efficiency on the individual household level poses novel research challenges in monitoring usage and providing accurate load forecasting. Forecasting electricity usage is an especially important component that can provide intelligence to smart meters. In this paper, we propose an enhanced approach for load forecasting at the household level. The impacts of residents’ daily activities and appliance usages on the power consumption of the entire household are incorporated to improve the accuracy of the forecasting model. The contributions of this paper are threefold: (1) we addressed short-term electricity load forecasting for 24 hours ahead, not on the aggregate but on the individual household level, which fits into the Residential Power Load Forecasting (RPLF) methods; (2) for the forecasting, we utilized a household specific dataset of behaviors that influence power consumption, which was derived using segmentation and sequence mining algorithms; and (3) an extensive load forecasting study using different forecasting algorithms enhanced by the household activity patterns was undertaken. [ABSTRACT FROM AUTHOR]

Stockwell transform(ST) time-frequency representation(ST-TFR) is a time frequency analysis method which combines short time Fourier transform with wavelet transform, and ST time frequency filtering(ST-TFF) method which takes advantage of time-frequency localized spectra can separate the signals from Gaussian noise. The ST-TFR and ST-TFF methods are used to analyze the fault signals, which is reasonable and effective in general Gaussian noise cases. However, it is proved that the mechanical bearing fault signal belongs to Alpha(α) stable distribution process(1 < α < 2) in this paper, even the noise also is α stable distribution in some special cases. The performance of ST-TFR method will degrade under α stable distribution noise environment, following the ST-TFF method fail. Hence, a new fractional lower order ST time frequency representation(FLOST-TFR) method employing fractional lower order moment and ST and inverse FLOST(IFLOST) are proposed in this paper. A new FLOST time frequency filtering(FLOST-TFF) algorithm based on FLOST-TFR method and IFLOST is also proposed, whose simplified method is presented in this paper. The discrete implementation of FLOST-TFF algorithm is deduced, and relevant steps are summarized. Simulation results demonstrate that FLOST-TFR algorithm is obviously better than the existing ST-TFR algorithm under α stable distribution noise, which can work better under Gaussian noise environment, and is robust. The FLOST-TFF method can effectively filter out α stable distribution noise, and restore the original signal. The performance of FLOST-TFF algorithm is better than the ST-TFF method, employing which mixed MSEs are smaller when α and generalized signal noise ratio(GSNR) change. Finally, the FLOST-TFR and FLOST-TFF methods are applied to analyze the outer race fault signal and extract their fault features under α stable distribution noise, where excellent performances can be shown. [ABSTRACT FROM AUTHOR]

B-spline functions are widely used in many industrial applications such as computer graphic representations, computer aided design, computer aided manufacturing, computer numerical control, etc. Recently, there exist some demands, e.g. in reverse engineering (RE) area, to employ B-spline curves for non-trivial cases that include curves with discontinuous points, cusps or turning points from the sampled data. The most challenging task in these cases is in the identification of the number of knots and their respective locations in non-uniform space in the most efficient computational cost. This paper presents a new strategy for fitting any forms of curve by B-spline functions via local algorithm. A new two-step method for fast knot calculation is proposed. In the first step, the data is split using a bisecting method with predetermined allowable error to obtain coarse knots. Secondly, the knots are optimized, for both locations and continuity levels, by employing a non-linear least squares technique. The B-spline function is, therefore, obtained by solving the ordinary least squares problem. The performance of the proposed method is validated by using various numerical experimental data, with and without simulated noise, which were generated by a B-spline function and deterministic parametric functions. This paper also discusses the benchmarking of the proposed method to the existing methods in literature. The proposed method is shown to be able to reconstruct B-spline functions from sampled data within acceptable tolerance. It is also shown that, the proposed method can be applied for fitting any types of curves ranging from smooth ones to discontinuous ones. In addition, the method does not require excessive computational cost, which allows it to be used in automatic reverse engineering applications. [ABSTRACT FROM AUTHOR]

Multi-robot task allocation is one of the main problems to address in order to design a multi-robot system, very especially when robots form coalitions that must carry out tasks before a deadline. A lot of factors affect the performance of these systems and among them, this paper is focused on the physical interference effect, produced when two or more robots want to access the same point simultaneously. To our best knowledge, this paper presents the first formal description of multi-robot task allocation that includes a model of interference. Thanks to this description, the complexity of the allocation problem is analyzed. Moreover, the main contribution of this paper is to provide the conditions under which the optimal solution of the aforementioned allocation problem can be obtained solving an integer linear problem. The optimal results are compared to previous allocation algorithms already proposed by the first two authors of this paper and with a new method proposed in this paper. The results obtained show how the new task allocation algorithms reach up more than an 80% of the median of the optimal solution, outperforming previous auction algorithms with a huge reduction of the execution time. [ABSTRACT FROM AUTHOR]

This paper presents a novel method on the optimization of bi-objective Flexible Job-shop Scheduling Problem (FJSP) under stochastic processing times. The robust counterpart model and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) are used to solve the bi-objective FJSP with consideration of the completion time and the total energy consumption under stochastic processing times. The case study on GM Corporation verifies that the NSGA-II used in this paper is effective and has advantages to solve the proposed model comparing with HPSO and PSO+SA. The idea and method of the paper can be generalized widely in the manufacturing industry, because it can reduce the energy consumption of the energy-intensive manufacturing enterprise with less investment when the new approach is applied in existing systems. [ABSTRACT FROM AUTHOR]

With the rapid development of ICT and Web technologies, a large an amount of information is becoming available and this is producing, in some instances, a condition of information overload. Under these conditions, it is difficult for a person to locate and access useful information for making decisions. To address this problem, there are information filtering systems, such as the personalized recommendation system (PRS) considered in this paper, that assist a person in identifying possible products or services of interest based on his/her preferences. Among available approaches, collaborative Filtering (CF) is one of the most widely used recommendation techniques. However, CF has some limitations, e.g., the relatively simple similarity calculation, cold start problem, etc. In this context, this paper presents a new regression model based on the support vector machine (SVM) classification and an improved PSO (IPSO) for the development of an electronic movie PRS. In its implementation, a SVM classification model is first established to obtain a preliminary movie recommendation list based on which a SVM regression model is applied to predict movies’ ratings. The proposed PRS not only considers the movie’s content information but also integrates the users’ demographic and behavioral information to better capture the users’ interests and preferences. The efficiency of the proposed method is verified by a series of experiments based on the MovieLens benchmark data set. [ABSTRACT FROM AUTHOR]

Combinatorial test design is a plan of test that aims to reduce the amount of test cases systematically by choosing a subset of the test cases based on the combination of input variables. The subset covers all possible combinations of a given strength and hence tries to match the effectiveness of the exhaustive set. This mechanism of reduction has been used successfully in software testing research with t-way testing (where t indicates the interaction strength of combinations). Potentially, other systems may exhibit many similarities with this approach. Hence, it could form an emerging application in different areas of research due to its usefulness. To this end, more recently it has been applied in a few research areas successfully. In this paper, we explore the applicability of combinatorial test design technique for Fractional Order (FO), Proportional-Integral-Derivative (PID) parameter design controller, named as FOPID, for an automatic voltage regulator (AVR) system. Throughout the paper, we justify this new application theoretically and practically through simulations. In addition, we report on first experiments indicating its practical use in this field. We design different algorithms and adapted other strategies to cover all the combinations with an optimum and effective test set. Our findings indicate that combinatorial test design can find the combinations that lead to optimum design. Besides this, we also found that by increasing the strength of combination, we can approach to the optimum design in a way that with only 4-way combinatorial set, we can get the effectiveness of an exhaustive test set. This significantly reduced the number of tests needed and thus leads to an approach that optimizes design of parameters quickly. [ABSTRACT FROM AUTHOR]

A Hyperspectral (HS) image provides observational powers beyond human vision capability but represents more than 100 times the data compared to a traditional image. To transmit and store the huge volume of an HS image, we argue that a fundamental shift is required from the existing “original pixel intensity”-based coding approaches using traditional image coders (e.g., JPEG2000) to the “residual”-based approaches using a video coder for better compression performance. A modified video coder is required to exploit spatial-spectral redundancy using pixel-level reflectance modelling due to the different characteristics of HS images in their spectral and shape domain of panchromatic imagery compared to traditional videos. In this paper a novel coding framework using Reflectance Prediction Modelling (RPM) in the latest video coding standard High Efficiency Video Coding (HEVC) for HS images is proposed. An HS image presents a wealth of data where every pixel is considered a vector for different spectral bands. By quantitative comparison and analysis of pixel vector distribution along spectral bands, we conclude that modelling can predict the distribution and correlation of the pixel vectors for different bands. To exploit distribution of the known pixel vector, we estimate a predicted current spectral band from the previous bands using Gaussian mixture-based modelling. The predicted band is used as the additional reference band together with the immediate previous band when we apply the HEVC. Every spectral band of an HS image is treated like it is an individual frame of a video. In this paper, we compare the proposed method with mainstream encoders. The experimental results are fully justified by three types of HS dataset with different wavelength ranges. The proposed method outperforms the existing mainstream HS encoders in terms of rate-distortion performance of HS image compression. [ABSTRACT FROM AUTHOR]

This paper proposes a method to predict fluctuations in the prices of cryptocurrencies, which are increasingly used for online transactions worldwide. Little research has been conducted on predicting fluctuations in the price and number of transactions of a variety of cryptocurrencies. Moreover, the few methods proposed to predict fluctuation in currency prices are inefficient because they fail to take into account the differences in attributes between real currencies and cryptocurrencies. This paper analyzes user comments in online cryptocurrency communities to predict fluctuations in the prices of cryptocurrencies and the number of transactions. By focusing on three cryptocurrencies, each with a large market size and user base, this paper attempts to predict such fluctuations by using a simple and efficient method. [ABSTRACT FROM AUTHOR]

How can we extract hidden relations from a tensor and a matrix data simultaneously in a fast, accurate, and scalable way? Coupled matrix-tensor factorization (CMTF) is an important tool for this purpose. Designing an accurate and efficient CMTF method has become more crucial as the size and dimension of real-world data are growing explosively. However, existing methods for CMTF suffer from lack of accuracy, slow running time, and limited scalability. In this paper, we propose S3CMTF, a fast, accurate, and scalable CMTF method. In contrast to previous methods which do not handle large sparse tensors and are not parallelizable, S3CMTF provides parallel sparse CMTF by carefully deriving gradient update rules. S3CMTF asynchronously updates partial gradients without expensive locking. We show that our method is guaranteed to converge to a quality solution theoretically and empirically. S3CMTF further boosts the performance by carefully storing intermediate computation and reusing them. We theoretically and empirically show that S3CMTF is the fastest, outperforming existing methods. Experimental results show that S3CMTF is up to 930× faster than existing methods while providing the best accuracy. S3CMTF shows linear scalability on the number of data entries and the number of cores. In addition, we apply S3CMTF to Yelp rating tensor data coupled with 3 additional matrices to discover interesting patterns. [ABSTRACT FROM AUTHOR]

In this paper, a new prediction approach is proposed for ocean vessel heave compensation based on echo state network (ESN). To improve the prediction accuracy and enhance the robustness against noise and outliers, a generalized similarity measure called correntropy is introduced into ESN training, which is referred as corr-ESN. An iterative method based on half-quadratic minimization is derived to train corr-ESN. The proposed corr-ESN is used for the heave motion prediction. The experimental results verify its effectiveness. [ABSTRACT FROM AUTHOR]

Cell segmentation in microscopy is a challenging problem, since cells are often asymmetric and densely packed. Successful cell segmentation algorithms rely identifying seed points, and are highly sensitive to variablility in cell size. In this paper, we present an efficient and highly parallel formulation for symmetric three-dimensional contour evolution that extends previous work on fast two-dimensional snakes. We provide a formulation for optimization on 3D images, as well as a strategy for accelerating computation on consumer graphics hardware. The proposed software takes advantage of Monte-Carlo sampling schemes in order to speed up convergence and reduce thread divergence. Experimental results show that this method provides superior performance for large 2D and 3D cell localization tasks when compared to existing methods on large 3D brain images. [ABSTRACT FROM AUTHOR]

Kernel regression models have been used as non-parametric methods for fitting experimental data. However, due to their non-parametric nature, they belong to the so-called “black box” models, indicating that the relation between the input variables and the output, depending on the kernel selection, is unknown. In this paper we propose a new methodology to retrieve the relation between each input regressor variable and the output in a least squares support vector machine (LS-SVM) regression model. The method is based on oblique subspace projectors (ObSP), which allows to decouple the influence of input regressors on the output by including the undesired variables in the null space of the projection matrix. Such functional relations are represented by the nonlinear transformation of the input regressors, and their subspaces are estimated using appropriate kernel evaluations. We exploit the properties of ObSP in order to decompose the output of the obtained regression model as a sum of the partial nonlinear contributions and interaction effects of the input variables, we called this methodology Nonlinear ObSP (NObSP). We compare the performance of the proposed algorithm with the component selection and smooth operator (COSSO) for smoothing spline ANOVA models. We use as benchmark 2 toy examples and a real life regression model using the concrete strength dataset from the UCI machine learning repository. We showed that NObSP is able to outperform COSSO, producing stable estimations of the functional relations between the input regressors and the output, without the use of prior-knowledge. This methodology can be used in order to understand the functional relations between the inputs and the output in a regression model, retrieving the physical interpretation of the regression models. [ABSTRACT FROM AUTHOR]

Clustering large and complex data sets whose partitions may adopt arbitrary shapes remains a difficult challenge. Part of this challenge comes from the difficulty in defining a similarity measure between the data points that captures the underlying geometry of those data points. In this paper, we propose an algorithm, DCG++ that generates such a similarity measure that is data-driven and ultrametric. DCG++ uses Markov Chain Random Walks to capture the intrinsic geometry of data, scans possible scales, and combines all this information using a simple procedure that is shown to generate an ultrametric. We validate the effectiveness of this similarity measure within the context of clustering on synthetic data with complex geometry, on a real-world data set containing segmented audio records of frog calls described by mel-frequency cepstral coefficients, as well as on an image segmentation problem. The experimental results show a significant improvement on performance with the DCG-based ultrametric compared to using an empirical distance measure. [ABSTRACT FROM AUTHOR]