Search

The problem of the optimal three-level location allocation of transfer center, processing factory and distribution center for supply chain network under uncertain transportation cost and customer demand are studied. We establish a two-stage fuzzy 0-1 mixed integer optimization model, by considering the uncertainty of the supply chain. Given the complexity of the model, this paper proposes a modified hybrid second order particle swarm optimization algorithm (MHSO-PSO) to solve the resulting model, yielding the optimal location and maximal expected return of supply chain simultaneously. A case study of clothing supply chain in Shanghai of China is then presented to investigate the specific influence of uncertainties on the transfer center, clothing factory and distribution center three-level location. Moreover, we compare the MHSO-PSO with hybrid particle swarm optimization algorithm and hybrid genetic algorithm, to validate the proposed algorithm based on the computational time and the convergence rate. [ABSTRACT FROM AUTHOR]

Abstract: Dynamic programming (DP) is one of classic and sophisticated optimization methods that have successfully been applied to solve the problem of hydro unit load dispatch (HULD). However, DP will be faced with the curse of dimensionality with the increase of unit number and installed generating capacity of hydropower station. With the appearance of the huge hydropower station similar to the Three George with 26 generators of 700MW, it is hard to apply the DP to large scale HULD problem. It is crucial to seek for other optimization techniques in order to improve the operation quality and efficiency. Different with the most of literature about power generation scheduling that focused on the comparisons of novel PSO algorithms with other techniques, the paper will pay emphasis on comparison study of PSO with DP based on a case hydropower station. The objective of study is to seek for an effective and feasible method for the large scale of hydropower station of the current and future in China. This paper first compares the performance of PSO and DP using a sample load curve of the Wujiangdu hydropower plant located in the upper stream of the Yangtze River in China and contained five units with the installed capacity of 1250MW. Next, the effect of different load interval and unit number on the optimal results and efficiency of two methods has also been implemented. The comparison results show that the PSO is feasible for HULD. Furthermore, we simulated the effect of the magnitude of unit number and load capacity on the optimal results and cost time. The simulation comparisons show that PSO has a great advantage over DP in the efficiency and will be one of effective methods for HULD problem of huge hydropower stations. [Copyright &y& Elsevier]

Abstract: In this paper, an improved particle swarm optimization (IPSO) algorithm is proposed. Besides the individual best position and the global best position, a nominal average position of the swarm is introduced in IPSO. The performance of IPSO is compared to different PSO variants with five well-known benchmark functions. The experimental results show that the proposed IPSO algorithm improves the searching performance on the benchmark functions. And then, IPSO, as well as other PSO variants, is applied to optimal tuning of Proportional–Integral–Derivative (PID) gains for a typical PID control system of water turbine governor. The computer simulation results of an actual hydro power plant in China show that IPSO algorithm has stable convergence characteristic and good computational ability, and it is an effective and easily implemented method for optimal tuning of PID gains of water turbine governor. [Copyright &y& Elsevier]

• A new ET model (SW_OPT) integrates the SW and the Ts-VI model using PSO. • E, T and ET from SW_OPT were validated in a typical irrigated area of China. • SW_OPT calculates ET and its components with high accuracy. • SW_OPT is significantly more accurate compared to SW_Ori. • SW_OPT has low sensitivity to most of input and empirical parameters. Daily actual evapotranspiration (ET) and its components – soil evaporation (E) and vegetation transpiration (T) – play a key role in water resource management of irrigated areas. Nevertheless, due to large uncertainties in the parameterization of the resistances in irrigated areas, traditional ET models do not always provide accurate ET estimates, especially for its components. This uncertainty is mainly due to the difficulty of determining the empirical parameters accurately of soil and canopy resistances which is debated for a long time and the error in input variables. This paper proposed an optimized Shuttleworth-Wallace model (SW) using the particle swarm optimization (PSO) algorithm to integrate the original SW with the surface temperature-vegetation index (Ts-VI) triangle models (named Shuttleworth & Wallace_Temperature Vegetation Index model, SW_TVI).The performance of the SW_TVI model was significantly improved by optimizing the soil and canopy resistances in the original SW model using discontinuous regional ET estimates from the Ts-VI model under clear-sky conditions. Compared with the original SW model, the root mean squared error (RMSE) and mean absolute deviation (MAD) of the SW_TVI model were reduced by more than 30%, against in situ measurements in the Heihe River Basin. The Bias of the T/ET ratio was also significantly reduced from -22.3% for the original SW model to -5.5% for the SW_TVI model. The annual contributions of E and T to ET were about 20% and 80%, respectively, and had a strong seasonal variation in the typical irrigated area of China. In summary, the SW_TVI model shows three outstanding advantages: (1) it estimates daily continuous E, T, and total ET with high accuracy; (2) it is very robust and insensitive or slightly sensitive to most input variables and empirical parameters; (3) it is independent from ground data. This new SW_TVI model will benefit water resources management in irrigated areas, particularly in arid and semi-arid regions. [ABSTRACT FROM AUTHOR]