Search

A 700-kA gas switch with graphite electrodes for pulsed power supply module has been developed. This paper describes the design, construction, and testing of the high-current gas switch and its trigger system. The two-electrode gas switch is selected, which suffers high peak and fast rise time currents. The trigger generator based on resonant charging of a pulse transformer is constructed to trigger the gas spark. An electrodynamic force model of switch electrodes is established. The electrodynamic force of connecting wires is also calculated. By comparison of the mechanical strengths of polyformaldehyde, epoxy, and fiber-reinforced plastic (FRP) rods, where FRP rods are selected as switch rods, the experimental results show that the mechanical strength of the switch increases by 200%. Extensive electric testing has proven the operating parameters of the switch and its trigger system. The experimental results show that the measured discharge current waveform is demonstrated to be over a 700-kA peak current and a 500- \mu \texts pulsewidth. The transfer charge per shot is more than 500 C. [ABSTRACT FROM PUBLISHER]

Starting from the updated requirements of an advanced laser system, a switch–trigger system for a 2.0-MJ pulsed power supply (PPS) module is developed. This paper discusses the design, construction, and testing of this switch–trigger system. The two-electrode construction for the spark gap switch is selected because of its superiority in terms of long working life, high peak currents, and fast rise time of currents. The trigger generator based on resonant charging of a pulse transformer is constructed. A magnetic isolator and a pressure controller are the auxiliary equipment of this system. In the section based on mathematical principles, the equations of the lifetime and stability of this spark gap switch with graphite electrodes are given. These expressions can be regarded as the design basis of the same type of switch. As for the trigger generator, the analysis states that an appropriate ratio can be obtained when using the resonant charging based on a core-type pulse transformer. The charging time is dependent on the leakage inductance and the capacitance of the primary and secondary capacitors. Extensive testing proves the operating parameters of the switches and the trigger generator. The measured discharge current waveform of the 2.0-MJ capacitive PPS module is demonstrated to be over 500 kA peak current and 500 \mus pulse width. The life test proves that the switch–trigger system can support more than 200 kC transfer charge. By replacing the electrodes, the lifetime of this switch can be extended furthrer. [ABSTRACT FROM PUBLISHER]

In this paper, starting from the project requirements, a 1.2-MJ pulsed power supply (PPS) module for a high-power laser system has been developed. The main circuit of this module consists of a high energy density capacitor bank, a spark gap switch, a magnetic switch, a trigger generator, and a load subsystem. Due to the superiority in the stability and service life, the two-electrode construction for the spark gap switch, high peak currents, and rise time of the currents is selected. Since a two-electrode spark gap switch has no separate trigger electrode and must be directly overvolted by the trigger generator, a small Marx generator has been designed and constructed for the advantage of the proven compactness and electrical performance. The effect of the magnetic switch represents a couple of functions. One is to block the triggering pulse produced by the Marx generator. Another is to permit the discharging current coming from the main capacitor bank. Finally, the measured discharge current waveform of the 1.2-MJ capacitive PPS module is demonstrated to be over a 300-kA peak current and a 500- \mu\s pulsewidth. Moreover, the life test has proved that the switch–trigger system can support more than 1500 discharging processes. [ABSTRACT FROM AUTHOR]

A spindle-shaped diffuse plasma cage is represented by photoreportage in the room-temperature atmospheric-pressure air. It is found that a closed plasma cage covered with diffuse plasma can be obtained only in an appropriate ring-ring electrode distance. By adjusting the ring-ring distance, we can destroy the closure property characterized by the appearance of corona or arc discharge on the surface of the cage. In addition, much larger plasma cage can be acquired using larger rings or adding more rings. [ABSTRACT FROM PUBLISHER]

Analysis of breakdown mechanism in gas-insulated trigatron switches is important for the engineering design and function prediction. Based on the gas discharge theory, a physical model was proposed to estimate the breakdown time for gas-insulated trigatron switches. And the model can explain the breakdown in the trigatron switches with two modes of the breakdown mechanism, i.e., fast breakdown mode (FBM) and slow-breakdown mode (SBM). Based on Raether breakdown criterion, this paper discussed the factors affecting on the E-field enhancement. The E-field is composed of the static E-field and the dynamic E-field, which leads to transformation of breakdown mechanism. Some coefficients could be determined by experiment and simulation, which are helpful to get the quantitative solution of breakdown time. [ABSTRACT FROM AUTHOR]

Two-electrode graphite spark gap switch (TGSGS) is used as the main discharge switch and triggered by a reliable trigger generator in pulsed power conditioning system (PPCS). There would be 108 energy modules in PPCS working at the same time. The reliable operating and jitters of the trigger generators will have impact on the PPCSs performance. In this paper, the working modes of the TGSGS are discussed and the performance of trigger generators in PPCS is tested and presented. A protection strategy of the trigger generator in PPCS is introduced, and effect of the blocking capacitor on the trigger pulse transmission is analyzed and tested. The protection strategy of the trigger generator based on blocking capacitor and fuse can effectively prevent the energy anti-irrigation failure when the pulse transformer core saturated. The blocking capacitor has some effect on the trigger pulse transmission, and has the larger capacitance, getting the higher peak amplitude on the cathode of the TGSGS. It is tried to discuss the working characteristics of the thyristors, and proposes a selection reference of the thyristors in this and other similar applications. The combination of analysis and measurement would be useful for the selection of thyristors and other components. [ABSTRACT FROM PUBLISHER]