Search

Summary: The present study is devoted to articulating a modified folded‐cascode circuit, to make folded‐cascode structures an attractive configuration as a transimpedance amplifier (TIA) for being employed in Giga‐bit per second optical communication receiver systems. Giga‐bps communication receivers are highly necessitating circuits to isolate the input parasitic capacitance of the photodiode. The present modification makes folded cascodes comparable to the famous regulated cascode (RGC) structures by isolating this parasitic capacitor almost by the same quantity. The system is shown to be capable of operating at 2.5 Gbps up to 8 Gbps data rate with a fixed bandwidth. The paper analyzes and evaluates the designed circuit mathematically, and the obtained simulated results from Cadence using TSMC 65 nm CMOS validate the suitability of the modified circuit as a TIA. [ABSTRACT FROM AUTHOR]

This paper proposes a mid-stage latch circuit to be employed in a high-speed comparator. The advantages of the proposed circuit are low kickback noise and offset. Moreover, low-power and high-speed characteristics are obtained by avoiding direct connection between the pre-amplifier and latch stages using another stage between them. The power-delay product (PDP) of the comparator is reduced due to the reduction in charging and discharging delays at the latching nodes. The proposed comparator consumes only 244.19 µW using a 1 V supply voltage. Furthermore, the bandwidth, delay, offset, and kickback noise of the proposed comparator are 4 GHz, 26.91 ps, 3 mV, and 38 mV, respectively. Results indicate the proper performance of the proposed comparator in low-power applications. [ABSTRACT FROM AUTHOR]