Search

A novel technology for the simultaneous and independent measurement of dual parameters is proposed and experimented. By using a single fiber Bragg grating half-pasted by 1C-LV epoxy under different curing conditions, the sensor structure is designed such that the reflective single-peak spectrum splits into a twin-peak spectrum, which makes the FBG spectrum form a natural spectral peak splitting bias. A measurement limitation exists in the FBG sensor packaging at room temperature, which can be solved by the high-temperature cured packaging method. To verify the validity of the theory and methodology, the experimental system is used. In the range from -1000 to +1000 με and from 35 to 75°C, the Bragg wavelength change is relative linear to the strain and temperature. The temperature and strain variations can be independently and simultaneously measured using the split peak, and the deviations of the FBG sensor are ±1°C and ±5 με, respectively. This single FBG sensor can realize dual-parameter measurement, which is valuable for narrow-space health monitoring. [ABSTRACT FROM AUTHOR]

To reduce loads acting on artillery carriages and obtain better values of recoil resistance, a study on multiple attribute decision making with interval uncertainty of the liquid orifice of a recoil mechanism was conducted. Taking the dimensions of the liquid orifice as the uncertainty variables, the uncertainty optimization model and algorithm based on three parameter interval were used to achieve the optimization schemes of the throttling bar outer dimensions with different tolerance grades. The multiple optimization schemes were sorted by employing the multiple attribute decision making method, in which the attribute weights were determined based on the maximum deviation method. The results show that the optimal design scheme is the one which considers simultaneously the parameter design and tolerance design of the throttling bar outer diameters. The optimal interval of the recoil resistance peaks and the optimal recoil resistance curve with sufficient fullness and flatness were obtained. The study results are beneficial for artillery design and evaluation concerning both the manufacturability of artillery and particular requirements of recoil resistance. [ABSTRACT FROM AUTHOR]

An in-line optical fiber Mach–Zehnder interferometric (MZI) sensor is proposed and experimentally demonstrated for magnetic field measurement. The fabrication mechanism of the optical fiber microstructures by CO2 laser is described in detail. The sensor with symmetrical structure is fabricated by splicing a 7-mm length of seven-core fiber and two fiber peanuts, which is encapsulated with magnetic fluid in the capillary. The transmission spectrum of the MZI is modulated by the refractive index of the magnetic fluid, which is affected by the magnetic field. The experimental results indicate that the mode interference is sensitive to the magnetic field and different dips of the interference spectrum have different sensitivities. Hence, simultaneous measurement of the temperature and magnetic field can be achieved by simultaneously monitoring two different dips. The sensitivities of the magnetic field and temperature can reach up to 0.062 nm∕Gs and 0.081 nm∕°C, respectively. The proposed Mach–Zehnder interference sensor has a more compact structure, simple manufacturing process, and high reliability, which would find potential applications in weak magnetic sensing fields. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study is to propose a method to construct corneal biomechanical model which is the foundation for simulation of corneal microsurgery. Methods: Corneal material has two significant characteristics: hyperelastic and viscoelastic. Firstly, Mooney-Rivlin hyperelastic model of cornea obtained based on stored-energy function can be simplified as a linear equation with two unknown parameters. Then, modified Maxwell viscoelastic model of the cornea, whose analytical form is consistent with the generalized Prony-series model, is proposed from the perspective of material mechanics. Results: Parameters of the model are determined by the uniaxial tensile tests and the stress-relaxation tests. Corneal material properties are simulated to verify the hyper-viscoelastic model and measure the effectiveness of the model in the finite element simulation. On this basis, an in vivo model of the corneal is built. And the simulation of extrusion in vivo cornea shows that the force is roughly nonlinearly increasing with displacement, and it is consistent with the results obtained by extrusion experiment of in vivo cornea. Conlusions: This paper derives a corneal hyper-viscoelastic model to describe the material properties more accurately, and explains the mathematical method for determination of the model parameters. The model is an effective biomechanical model, which can be directly used for simulation of trephine and suture in keratoplasty. Although the corneal hyper-viscoelastic model is taken as the object of study, the method has certain adaptability in biomechanical research of ophthalmology. [ABSTRACT FROM AUTHOR]