Search

To meet commercialization requirements, the distributions of materials in hafnium-based ferroelectric devices—including their phase and orientation—need to be controlled. This article presents a method for improving the ferroelectric phase ratio and orientation by adjusting the stress distribution of the annealing structure in a three-dimensional capacitor. In such a structure, stress can be applied in three directions: tangential, axial, and radial; there are, thus, more ways to regulate stress in three-dimensional structures than in two-dimensional structures. This work sought to clarify the role of the stress direction on the proportions and orientations of ferroelectric phases. The results of stress simulations show that a structure with an internal TiN electrode, but no filling provides greater axial and tangential stresses in the hafnium-oxide layer. In comparison with the case of the hole being filled with tungsten, the proportion of the O phase is increased by approximately 20%, and in experiments, the projection of the polarization direction onto the normal was found to be increased by 5%. Axial and tangential stresses are regarded to be beneficial for the formation of the O phase and for improving the orientation of the polarization direction. This work provides a theoretical basis and guidance for the three-dimensional integration of hafnium-based ferroelectric materials. [ABSTRACT FROM AUTHOR]

Background: The efficacy and safety of potassium-competitive acid blockers (P-CABs) in the eradication of Helicobacter pylori (Hp) remains controversial when compared with proton pump inhibitors (PPIs). Objectives: The current study set out to compare the differences in the eradication rate and adverse reactions between eradication regimens based on P-CAB or PPI drugs and the differences between the vonoprazan-based and the tegoprazan-based regimens to explore the efficacy and safety of different Hp eradication regimens. Data sources and methods: Databases including PubMed, EMBASE, Cochrane Library, and WOS were searched from the inception of these databases up to July 2023, and eligible randomized controlled trials (RCTs) were included. The outcome measures were the eradication rate and the incidence of adverse reactions of different regimens in treating Hp. The results were estimated as relative risk (RR) and its 95% confidence interval (CI), and R 4.2.1 software was used to perform the network meta-analysis (NMA). Results: A total of 20 studies were included in the analysis, involving 5815 patients with Hp. In terms of eradication rate, the 2-week vonoprazan-based triple regimen (V-Tri-2w) was the best, which was superior to the 2-week PPI-based quadruple regimen [P-Qua-2w, RR = 0.9, 95% CI: (0.85–0.95)] and the 1-week tegoprazan-based triple regimen [T-Tri-1w, RR = 0.79, 95% CI: (0.64–0.97)]; the 2-week tegoprazan-based quadruple regimen (T-Qua-2w) was superior to the 1-week PPI-based triple regimen [P-Tri-1w, RR = 0.82, 95% CI: (0.67–0.99)], and there was no difference between the remaining tegoprazan-based regimens and the PPI-based or vonoprazan-based regimens. In terms of the incidence of adverse reactions, the 2-week vonoprazan-based binary regimen (V-Bi-2w) was lower than that of the 2-week PPI-based quadruple regimen [P-Qua-2w, RR = 1.98, 95% CI: (1.57–2.52)]; there was no significant difference between 1 and 2 weeks for each regimen, such as the vonoprazan-based triple regimen [RR = 1.11, 95% CI: (0.82–1.52)]. Conclusion: In the eradication treatment of Hp, the efficacy and safety of vonoprazan-based regimens are generally better than those of PPI-based regimens. Among them, the V-Tri-2w regimen has the highest eradication rate and may be the preferred choice for Hp eradication. [ABSTRACT FROM AUTHOR]

The 2D/3D perovskite heterostructures have been widely investigated to enhance the efficiency and stability of perovskite solar cells (PSCs). However, rational manipulation of phase distribution and energy level alignment in such 2D/3D perovskite hybrids are still of great challenge. Herein, we successfully achieved spontaneous phase alignment of 2D/3D perovskite heterostructures by concurrently introducing both 2D perovskite component and organic halide additive. The graded phase distribution of 2D perovskites with different n values and 3D perovskites induced favorable energy band alignment across the perovskite film and boosted the charge transfer at the relevant heterointerfaces. Moreover, the 2D perovskite component also acted as a "band‐aid" to simultaneously passivate the defects and release the residual tensile stress of perovskite films. Encouragingly, the blade‐coated PSCs based on only ≈2 s in‐situ fast annealed 2D/3D perovskite films with favorable energy funnels and toughened heterointerfaces achieved promising efficiencies of 22.5 %, accompanied by extended lifespan. To our knowledge, this is the highest reported efficiency for the PSCs fabricated with energy‐saved thermal treatment just within a few seconds, which also outperformed those state‐of‐the‐art annealing‐free analogues. Such a two‐second‐in‐situ‐annealing technique could save the energy cost by up to 99.6 % during device fabrication, which will grant its low‐coast implementation. [ABSTRACT FROM AUTHOR]

The 2D/3D perovskite heterostructures have been widely investigated to enhance the efficiency and stability of perovskite solar cells (PSCs). However, rational manipulation of phase distribution and energy level alignment in such 2D/3D perovskite hybrids are still of great challenge. Herein, we successfully achieved spontaneous phase alignment of 2D/3D perovskite heterostructures by concurrently introducing both 2D perovskite component and organic halide additive. The graded phase distribution of 2D perovskites with different n values and 3D perovskites induced favorable energy band alignment across the perovskite film and boosted the charge transfer at the relevant heterointerfaces. Moreover, the 2D perovskite component also acted as a "band‐aid" to simultaneously passivate the defects and release the residual tensile stress of perovskite films. Encouragingly, the blade‐coated PSCs based on only ≈2 s in‐situ fast annealed 2D/3D perovskite films with favorable energy funnels and toughened heterointerfaces achieved promising efficiencies of 22.5 %, accompanied by extended lifespan. To our knowledge, this is the highest reported efficiency for the PSCs fabricated with energy‐saved thermal treatment just within a few seconds, which also outperformed those state‐of‐the‐art annealing‐free analogues. Such a two‐second‐in‐situ‐annealing technique could save the energy cost by up to 99.6 % during device fabrication, which will grant its low‐coast implementation. [ABSTRACT FROM AUTHOR]

The perovskite solar cells (PSCs) are promising for commercialization and practical application. However, high‐quality perovskite films are normally fabricated in inert gas‐filled glovebox, followed by thermal annealing, which is energy‐consuming and thus not cost‐effective. In this study, a simple manufacturing strategy is demonstrated to fabricate the highly‐crystalline perovskite films in ambient air (a relative humidity of over ≈50%) at room temperature via blade‐coating without the subsequent thermal–annealing. The perovskite precursor chemistry is tailored by solvent engineering via employing 2‐methoxyethanol, which can strongly coordinate with ammonium halide species, thus forming highly uniform small‐sized colloids and facilitating the homogeneous nucleation and rapid crystallization of perovskite films even at room temperature. The resultant PSCs fabricated with ambient‐processed, annealing‐free MAPbI3 perovskite films exhibit a champion efficiency up to 19.16% with negligible hysteresis and improved reproducibility, which is on par with the high‐temperature annealed counterparts fabricated in N2, and represented one of the highest reported efficiencies for the room‐temperature processed PSCs in ambient air. The unencapsulated devices show extended lifespan over 1000 h with nearly no efficiency loss. [ABSTRACT FROM AUTHOR]

Organic nonlinear optical materials have potential in applications such as lightings and bioimaging, but tend to have low photoluminescent quantum yields and are prone to lose the nonlinear optical activity. Herein, we demonstrate to weave large-area, flexible organic nonlinear optical membranes composed of 4-N,N-dimethylamino-4ʹ-Nʹ-methyl-stilbazolium tosylate@cyclodextrin host-guest supramolecular complex. These membranes exhibited a record high photoluminescence quantum yield of 73.5%, and could continuously emit orange luminescence even being heated at 300 °C, thus enabling the fabrication of thermotolerant light-emitting diodes. The nonlinear optical property of these membranes can be well-preserved even in polar environment. The supramolecular assemblies with multiphoton absorption characteristics were used for in vivo real-time imaging of Escherichia coli at 1000 nm excitation. These findings demonstrate to achieve scalable fabrication of organic nonlinear optical materials with high photoluminescence quantum yields, and good stability against thermal stress and polar environment for high-performance, durable optoelectronic devices and humanized multiphoton bio-probes. Organic nonlinear optical materials have potential in applications such as bioimaging, but tend to have low photoluminescent quantum yields and are prone to aggregation-caused quenching. Here, the authors report a host-guest approach for improving the luminescent properties of these materials. [ABSTRACT FROM AUTHOR]

Objectives: To determine whether age at menarche (AAM), age at first live birth (AFB), and estradiol levels are causally correlated with the development of systemic lupus erythematosus (SLE). Methods: A two-sample Mendelian randomization (MR) analysis was performed after data was collected from a dataset of genome-wide association studies (GWASs) related to SLE (as outcome), and from open access databases to find statistics related to AAM, AFB, and estradiol levels (as exposure). Result: In our study, a negative causal correlation between AAM and SLE was confirmed by MR analysis (MR egger: beta = 0.116, SE = 0.948, p = 0.909; weighted median: beta = −0.416, SE = 0.192, p = 0.030; and IVW: beta = −0.395, SE = 0.165, p = 0.016). However, there were no genetic causal effects of AFB and the estradiol levels on SLE, based on the results of MR analysis as follows: AFB (MR egger: beta = - 2.815, SE = 1.469, p = 0.065; Weighted median: beta = 0.334, SE = 0.378, p = 0.377; and IVW: beta = 0.188, SE = 0.282, p = 0.505) and the estradiol levels (MR egger: beta = 0.139, SE = 0.294, p = 0.651; weighted median: beta = 0.063, SE = 0.108, p = 0.559; IVW: beta = 0.126, SE = 0.097, p = 0.192). Conclusions: Our findings revealed that AAM may be associated with increased risk of the development of SLE, while there were no such causal effects from AFB and estradiol levels. [ABSTRACT FROM AUTHOR]

The permanent magnet synchronous motor (PMSM) has been widely used in the field of ship electric propulsion due to its advantages of a small size, light weight, low loss, and high efficiency. In this paper, a 100 kW ship-side thruster motor was taken as the research object, and the problem of the high harmonic content of the air gap magnetic flux density in the motor was addressed by designing a rotor eccentricity. On this basis, the hybrid Taguchi method of genetic algorithm was used to optimize the rotor structural parameters with increasing the efficiency and reducting the cost of the motor as the optimization objectives. The results show that the performance and economy of the motor have been greatly improved after optimization. Finally, the motor weight reduction hole was designed, and a prototype was manufactured and tested. The test data are within the allowable range compared with the simulation data, verifying the effectiveness of the multiobjective optimization algorithm proposed in this paper. [ABSTRACT FROM AUTHOR]

Mixed‐cation, small band‐gap perovskites via rationally alloying formamidinium (FA) and methylammonium (MA) together have been widely employed for blade‐coated perovskite solar cells with satisfied efficiencies. One of the stringent challenges lies in difficult control of the nucleation and crystallization kinetics of the perovskites with mixed ingredients. Herein, a pre‐seeding strategy by mixing FAPbI3 solution with pre‐synthesized MAPbI3 microcrystals has been developed to smartly decouple the nucleation and crystallization process. As a result, the time window of initialized crystallization has been greatly extended by 3 folds (i.e. from 5 s to 20 s), which enables the formation of uniform and homogeneous alloyed‐FAMA perovskite films with designated stoichiometric ratios. The resultant blade‐coated solar cells achieved a champion efficiency of 24.31 % accompanied by outstanding reproducibility with more than 87 % of the devices showing efficiencies higher than 23 %. [ABSTRACT FROM AUTHOR]

Mixed‐cation, small band‐gap perovskites via rationally alloying formamidinium (FA) and methylammonium (MA) together have been widely employed for blade‐coated perovskite solar cells with satisfied efficiencies. One of the stringent challenges lies in difficult control of the nucleation and crystallization kinetics of the perovskites with mixed ingredients. Herein, a pre‐seeding strategy by mixing FAPbI3 solution with pre‐synthesized MAPbI3 microcrystals has been developed to smartly decouple the nucleation and crystallization process. As a result, the time window of initialized crystallization has been greatly extended by 3 folds (i.e. from 5 s to 20 s), which enables the formation of uniform and homogeneous alloyed‐FAMA perovskite films with designated stoichiometric ratios. The resultant blade‐coated solar cells achieved a champion efficiency of 24.31 % accompanied by outstanding reproducibility with more than 87 % of the devices showing efficiencies higher than 23 %. [ABSTRACT FROM AUTHOR]

Aim: To evaluate the utility of magnetic resonance imaging (MRI) and magnetic resonance sialography (MRS) for diagnosis of primary Sjögren syndrome (pSS) singly or integrated with 2016 American College of Rheumatology (ACR)/European League Against Rheumatic Diseases (EULAR) classification criteria. Methods: The diagnostic efficiencies of MRI, MRS, and labial salivary gland biopsy (LSGB) were evaluated. The prediction model was established by multivariate analysis. Finally, performance of the ACR/EULAR criteria was evaluated after addition of MRI + MRS or replacement of original items by MRI + MRS. Results: The combined use of LSGB + MRI + MRS provided the greatest diagnostic value. MRI and MRS grade had positive correlations with disease duration and pathological grade of the labial gland (both P < 0.001). MRI and MRS grade had positive correlations with xerostomia severity and negative correlations with unstimulated salivary flow rate (both P < 0.001). The consistency of MRI grade and MRS grade in the diagnosis of parotid gland lesions was poor (κ = 0.253, P < 0.001). The diagnostic efficiency of our prediction model (AUC 0.906) was similar to that of criteria from the ACR/EULAR (AUC 0.930). Adding MRI + MRS to the ACR/EULAR criteria improved the sensitivity (92.3% vs 90.8%), whereas the specificity remained the same (88.9% vs 89.1%). Replacing LSGB by MRI + MRS in the ACR/EULAR criteria decreased both sensitivity and specificity (88.1% vs 90.8% and 86.4% vs 89.1%, respectively). Conclusion: The combined application of MRI and MRS has ideal clinical application value in the diagnosis of early‐stage pSS. Validity of the ACR/EULAR criteria remains high after incorporation of MRI + MRS. [ABSTRACT FROM AUTHOR]

The multi-UAV path planning method based on artificial potential field (APF) has the advantage of rapid processing speed and the ability to deal with dynamic obstacles, though some problems remain—such as a lack of consideration of the initial heading constraint of the UAVs, making it easy to fall into a local minimum trap, and the path not being sufficiently smooth. Consequently, a fixed-wing UAV formation path planning method based on piecewise potential field (PPF) is proposed, where the problem of UAV formation flight path planning in different states can be solved by suitable design of the PPF function. Firstly, the potential field vector can be used to represent the potential field functions of obstacles and target points to meet the kinematic constraints of the UAV. Secondly, the local minimum region can be detected, the additional potential field vector being set to break away from this region. Finally, the change rules of the potential field vector of a UAV in the formation reconstruction scene can be designed, a smooth formation flight track being assured by adjusting the corresponding speed of each UAV track point. Considering the path planning of a five-UAV formation as an example, we conducted simulation experiments. The results showed that—compared with the existing methods based on APF—the results obtained using the PPF-based method considered the initial heading limits of the UAVs, the planned path being considerably smoother. Moreover, the proposed method could plan multiple UAV tracks, satisfying the known constraints without conflict in complex scenarios. [ABSTRACT FROM AUTHOR]

Lead halide perovskites show great potential to be used in wearable optoelectronics. However, obstacles for real applications lie in their instability under light, moisture and temperature stress, noxious lead ions leakage and difficulties in fabricating uniform luminescent textiles at large scale and high production rates. Overcoming these obstacles, we report simple, high-throughput electrospinning of large-area (> 375 cm2) flexible perovskite luminescent textiles woven by ultra-stable polymer@perovskite@cyclodextrin@silane composite fibers. These textiles exhibit bright and narrow-band photoluminescence (a photoluminescence quantum yield of 49.7%, full-width at half-maximum <17 nm) and the time to reach 50% photoluminescence of 14,193 h under ambient conditions, showcasing good stability against water immersion (> 3300 h), ultraviolet irradiation, high temperatures (up to 250 °C) and pressure surge (up to 30 MPa). The waterproof PLTs withstood fierce water scouring without any detectable leaching of lead ions. These low-cost and scalable woven PLTs enable breakthrough application in marine rescue. Instability of perovskites under light, moisture and temperature stress hinders their potential in real applications. Here Tian et al. demonstrate the high-throughput fabrication of large-area, flexible, color-tunable, waterproof and durable wearable luminescent textiles suitable for marine rescue. [ABSTRACT FROM AUTHOR]

Scientifically and reasonably pricing products and allocating slots are key to improving the profitability and competitiveness of high-speed railway expresses. In this research, we focus on the freight transportation pricing and slot allocation of high-speed railway express companies in a competitive environment. The goals of this research are to make decisions on the pricing and slot allocation schemes of the high-speed railway express between sections through the method of multicriteria decision making, and then to test these changes in reality. This research innovatively takes the high-speed freight Electric Multiple Unit (EMU) train as its research object and innovatively applies the revenue management theory to high-speed railway express research in a competitive environment, proposing a comprehensive decision-making model based on the sharing rate model. The results show that, by adopting the scheme proposed in this research, the income of high-speed railway express companies can be increased by 13.6%. In addition, the method proposed in this research also enriches the current theory on high-speed railway freight transportation, providing strategies for companies to expand their market and increase profit. [ABSTRACT FROM AUTHOR]

Fibroblast-derived exosomes have been reported to transfer microRNAs to recipient cells, where they regulate target gene expression, which is of interest for understanding the basic biology of inflammation, tissue homeostasis, and development of therapeutic approaches. Initial microarray-based analysis carried out in this study identified the rheumatoid arthritis (RA)–related differentially expressed gene pyruvate dehydrogenase kinase 4 (PDK4). Subsequently, the upstream regulatory microRNA-106b (miR-106b) of PDK4 was predicted with bioinformatic analyses. A collagen-induced arthritis (CIA)-induced mouse model was established, and exosomes were isolated from synovial fibroblasts (SFs) and transferred into chondrocytes to identify the role of exosomes in rheumatoid arthritis (RA). We found that PDK4 was poorly expressed in RA cartilage tissues and chondrocytes, while miR-106b was highly expressed in RA SFs and SF-derived exosomes. Notably, PDK4 was confirmed as a target gene of miR-106b. Over-expression of PDK4 promoted the proliferation and migration abilities of chondrocytes and inhibited their apoptosis as well as affected the receptor activator of nuclear factor kappa B ligand (RANKL)/RANK/osteoprotegerin (OPG) system. Meanwhile, miR-106b was delivered from SFs to chondrocytes through exosomes, which suppressed chondrocyte proliferation and migration and accelerated apoptosis as well as affected the RANKL/RANK/OPG system via down-regulation of PDK4. Furthermore, in vivo results validated that miR-106b inhibition could relieve CIA-induced RA. Taken together, SF-derived exosomal miR-106b stimulates RA initiation by targeting PDK4, indicating a physiologically validated potential approach for the prevention and treatment of RA. Key messages: PDK4 is decreased in chondrocytes of RA, while miR-106b is increased in SFBs. PDK4 promotes proliferation and migration of chondrocytes. miR-106b could target 3′UTR of PDK4 gene. SFB-exosomal miR-106b inhibits proliferation and migration of chondrocytes. Inhibition of miR-106b attenuates RA progression in a CIA mouse model. [ABSTRACT FROM AUTHOR]

Rheumatoid arthritis (RA) is a chronic inflammation mediated by autoimmune responses. MEG3, a kind of long noncoding RNA (lncRNA), participates in cell proliferation in cancer tissues. However, the correlation between MEG3 and RA is yet unclear. Therefore, to clarify how MEG3 works in RA, we performed a series of experiments using RA samples. We found that MEG3 was downregulated in the fibroblast‐like synoviocytes of RA patients (RA‐FLS), in comparison with healthy subjects. MEG3 was also down‐regulated evidently in lipopolysaccharide (LPS)‐treated chondrocyte. As part of our experiments, MEG3 was overexpressed in chondrocyte by transfection with lentivirus containing sequences encoding MEG3. In addition, in presence of LPS, reductions were identified not only in the cell proliferation, but also in the generation of interleukin‐23 (IL‐23), which, however were reversed in the lentivirus (containing MEG3‐encoding sequences)‐transfected chondrocytes. Up‐regulated MEG3 resulted in an increase the level of Ki67. Moreover, MEG3 was negatively correlated with miR‐141, and miR‐141 was up‐regulated in LPS‐treated chondrocyte. Inhibitory effects of MEG3 overexpression, mentioned above, were partially abolished by overexpressed miR‐141. Further, animal experiment also showed the inhibitory effect of MEG3 in overexpression on the AKT/mTOR signaling pathway. In‐vivoexperiments also showed that cell proliferation was facilitated by MEG3 overexpression with inhibited inflammation. In summary, the protective role of MEG3 in RA was proved to be exerted by the increase in the rate of proliferation, which might correlate to the regulatory role of miR‐141 and AKT/mTOR signal pathway, suggesting that MEG3 holds great promise as a therapeutic strategy for RA. [ABSTRACT FROM AUTHOR]