Search

Photodynamic therapy (PDT) is a non-invasive therapy that has made significant progress in treating different diseases, including cancer, by utilizing new nanotechnology products such as graphene and its derivatives. Graphene-based materials have large surface area and photothermal effects thereby making them suitable candidates for PDT or photo-active drug carriers. The remarkable photophysical properties of graphene derivates facilitate the efficient generation of reactive oxygen species (ROS) upon light irradiation, which destroys cancer cells. Surface functionalization of graphene and its materials can also enhance their biocompatibility and anticancer activity. The paper delves into the distinct roles played by graphene-based materials in PDT such as photosensitizers (PS) and drug carriers while at the same time considers how these materials could be used to circumvent cancer resistance. This will provide readers with an extensive discussion of various pathways contributing to PDT inefficiency. Consequently, this comprehensive review underscores the vital roles that graphene and its derivatives may play in emerging PDT strategies for cancer treatment and other medical purposes. With a better comprehension of the current state of research and the existing challenges, the integration of graphene-based materials in PDT holds great promise for developing targeted, effective, and personalized cancer treatments., Competing Interests: The authors report no conflicts of interest in this work., (© 2024 Dilenko et al.)

Fluorescent carbon dots (CDs) are potential tools for the labeling of cells with many advantages such as photostability, multicolor emission, small size, rapid uptake, biocompatibility, and easy preparation. Affinity towards organelles can be influenced by the surface properties of CDs which affect the interaction with the cell and cytoplasmic distribution. Organelle targeting by carbon dots is promising for anticancer treatment; thus, intracellular trafficking and cytotoxicity of cationic CDs was investigated. Based on our previous study, we used quaternized carbon dots (QCDs) for treatment and monitoring the behavior of two human cancer cell MCF-7 and HeLa lines. We found similarities between human cancer cells and mouse fibroblasts in the case of QCDs uptake. Time lapse microscopy of QCDs-labeled MCF-7 cells showed that cells are dying during the first two hours, faster at lower doses than at higher ones. QCDs at a concentration of 100 µg/mL entered into the nucleus before cellular death; however, at a dose of 200 µg/mL, blebbing of the cellular membrane occurred, with a subsequent penetration of QCDs into the nuclear area. In the case of HeLa cells, the dose-depended effect did not happen; however, the labeled cells were also dying in mitosis and genotoxicity occurred nearly at all doses. Moreover, contrasted intracellular compartments, probably mitochondria, were obvious after 24 h incubation with 100 µg/mL of QCDs. The levels of reactive oxygen species (ROS) slightly increased after 24 h, depending on the concentration, thus the genotoxicity was likely evoked by the nanomaterial. A decrease in viability did not reach IC 50 as the DNA damage was probably partly repaired in the prolonged G0/G1 phase of the cell cycle. Thus, the defects in the G2/M phase may have allowed a damaged cell to enter mitosis and undergo apoptosis. The anticancer effect in both cell lines was manifested mainly through genotoxicity.

It is important to understand the nanomaterials intracellular trafficking and distribution and investigate their targeting into the nuclear area in the living cells. In our previous study, we firstly observed penetration of nonmodified positively charged carbon dots decorated with quaternary ammonium groups (QCDs) into the nucleus of mouse NIH/3T3 fibroblasts. Thus, in this work, we focused on deeper study of QCDs distribution inside two healthy mouse NIH/3T3 and L929 cell lines by fluorescence microspectroscopy and performed a comprehensive cytotoxic and DNA damage measurements. Real-time penetration of QCDs across the plasma cell membrane was recorded, concentration dependent uptake was determined and endocytic pathways were characterized. We found out that the QCDs concentration of 200 µg/mL is close to saturation and subsequently, NIH/3T3 had a different cell cycle profile, however, no significant changes in viability (not even in the case with QCDs in the nuclei) and DNA damage. In the case of L929, the presence of QCDs in the nucleus evoked a cellular death. Intranuclear environment of NIH/3T3 cells affected fluorescent properties of QCDs and evoked fluorescence blue shifts. Studying the intracellular interactions with CDs is essential for development of future applications such as DNA sensing, because CDs as DNA probes have not yet been developed.

Aim: Natural or artificial substances have become an inseparable part of our lives. It is questionable whether adequate testing has been performed in order to ensure these substances do not pose a serious health risk. The principal aim of our research was to clarify the potential risk of adding essential oils to food, beverages and cosmetic products., Methods: The toxicity of substances frequently employed in cosmetics, aromatherapy and food industry (bergamot oil, Litsea cubeba oil, orange oil, citral) were investigated using cell line NIH3T3 (mouse fibroblasts) with/without UV irradiation. The MTT assay was used to estimate the cell viability. Reactive oxygen species (ROS) which are products of a number of natural cellular processes such as oxygen metabolism and inflammation were measured to determine the extent of cellular stress. DNA damage caused by strand breaks was examined by comet assay., Results: MTT test determined EC50 values for all tested substances, varying from 0.0023% v/v for bergamot oil to 0.018% v/v for citral. ROS production measurement showed that UV radiation induces oxidative stress to the cell resulting in higher ROS production compared to the control and non-irradiated samples. Comet assay revealed that both groups (UV, without UV) exert irreversible DNA damage resulting in a cell death., Conclusions: Our findings suggest that even low concentrations (lower than 0.0464% v/v) of orange oil can be considered as phototoxic (PIF value 8.2) and probably phototoxic for bergamot oil (PIF value 4.6). We also found significant changes in the cell viability, the ROS production and the DNA after the cells were exposed to the tested chemicals. Even though these substances are widely used as antioxidants it should be noted that they present a risk factor and their use in cosmetic and food products should be minimized., (Copyright© by the National Institute of Public Health, Prague 2016)

Hyaluronan (HA) films exhibit properties suitable for various biomedical applications, but the solubility of HA limits their use in aqueous environments. Therefore, we developed water insoluble films based on palmitoyl esters of HA (pHA). Films were prepared from pHA samples with various degrees of substitution (DS) and molecular weights and their mechanical properties and swelling were characterized. Additionally, scanning electron microscopy and atomic force microscopy were used for visualization. Despite being prepared by solution casting, the films had a very smooth surface and were homogeneous in thickness. The film properties were in accordance with the polymer DS and molecular weight, enabling to tailor them for future applications by choosing a suitable pHA material. The behavior of the films toward cells was assessed in vitro. All films were non-cytotoxic and showed no adhesion of cells. These results show that the developed films are suitable candidates for various biomedical applications such as tissue engineering or wound healing., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Silver nanoparticles (AgNPs) have been used for decades as anti-bacterial agents in various industrial fields such as cosmetics, health industry, food storage, textile coatings and environmental applications, although their toxicity is not fully recognized yet. Antimicrobial and catalytic activity of AgNPs depends on their size as well as structure, shape, size distribution, and physico-chemical environment. The unique properties of AgNPs require novel or modified toxicological methods for evaluation of their toxic potential combined with robust analytical methods for characterization of nanoparticles applied in relevant vehicles, e.g., culture medium with/without serum and phosphate buffered saline., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The modification of implant surface situated in the area of peri-implant sulcus has important role in bacterial and cell adhesion. Six different chemically and physically modified titanium discs were prepared: glazed (Tis-MALP), unglazed (Tis-O), unglazed and alkali-etched (Tis-OA), unglazed and coated with ZrN (Tis-OZ), unglazed, sand blasted, and acid etched (Tis-OPAE), and unglazed, sand blasted, acid, and alkali etched (Tis-OPAAE). Analysis of surface topography was determined using scanning electron microscopy and atomic force microscopy (AFM). Biocompatibility of gingival fibroblasts was characterized by the production of tumor necrosis factor alpha, collagen I, matrix metalloproteinase 2 (MMP-2) after 24 and 72 h and expression of α3 β1 integrin and vinculin using enzyme-linked immunosorbent assay (ELISA) or modified ELISA after 6 and 24 h. Microorganism adhesion (five bacterial strains) and biofilm formation was also evaluated. The adhesion of bacteria and gingival fibroblasts was significantly higher on titanium disc Tis-OPAAE and biofilm formation on the same surface for Streptococcus mutans, Streptococcus gordonii, and Streptococcus intermedius. The gingival fibroblasts on Tis-OPAAE disc had also significantly lower production of MMP-2. The collagen production was significantly lower on all surfaces with roughness higher than 0.2 μm. This study confirmed that the titanium disc with the surface roughness 3.39 μm (Tis-OPAAE) supported the adhesion of bacterial strains as well as gingival fibroblasts., (Copyright © 2013 Wiley Periodicals, Inc.)

Two types of magnetic binary nanocomposites, Ag@Fe(3)O(4) and γ-Fe(2)O(3)@Ag, were synthesized and characterized and their antibacterial activities were tested. As a magnetic component, Fe(3)O(4) (magnetite) nanoparticles with an average size of about 70 nm and monodisperse γ-Fe(2)O(3) (maghemite) nanoparticles with an average size of 5 nm were used. Nanocomposites were prepared via in situ chemical reduction of silver ions by maltose in the presence of particular magnetic phase and molecules of polyacrylate serving as a spacer among iron oxide and silver nanoparticles. In the case of the Ag@Fe(3)O(4) nanocomposite, silver nanoparticles, caught at the surfaces of Fe(3)O(4) nanocrystals, were around 5 nm in a size. On the contrary, in the case of the γ-Fe(2)O(3)@Ag nanocomposite, ultrafine γ-Fe(2)O(3) nanoparticles surrounded silver nanoparticles ranging in a size between 20 and 40 nm. In addition, the molecules of polyacrylate in this nanocomposite type suppress considerably interparticle magnetic interactions as proved by magnetization measurements. Both synthesized nanocomposites exhibited very significant antibacterial and antifungal activities against ten tested bacterial strains (minimum inhibition concentrations (MIC) from 15.6 mg/L to 125 mg/L) and four candida species (MIC from 1.9 mg/L to 31.3 mg/L). Moreover, acute nanocomposite cytotoxicity against mice embryonal fibroblasts was observed at concentrations of higher than 430 mg/L (Ag@Fe(3)O(4)) and 292 mg/L (γ-Fe(2)O(3)@Ag). With respect to the non-cytotoxic nature of the polyacrylate linker, both kinds of silver nanocomposites are well applicable for a targeted magnetic delivery of silver nanoparticles in medicinal and disinfection applications., (Copyright © 2011 Elsevier Ltd. All rights reserved.)