Search

The exchange bias phenomenon, inherent in exchange-coupled ferromagnetic and antiferromagnetic systems, has intrigued researchers for decades. Van der Waals materials, with their layered structures, offer an ideal platform for exploring exchange bias. However, effectively manipulating exchange bias in van der Waals heterostructures remains challenging. This study investigates the origin of exchange bias in MnPS 3 /Fe 3 GeTe 2 van der Waals heterostructures, demonstrating a method to modulate nearly 1000% variation in magnitude through simple thermal cycling. Despite the compensated interfacial spin configuration of MnPS 3 , a substantial 170 mT exchange bias is observed at 5 K, one of the largest observed in van der Waals heterostructures. This significant exchange bias is linked to anomalous weak ferromagnetic ordering in MnPS 3 below 40 K. The tunability of exchange bias during thermal cycling is attributed to the amorphization and changes in the van der Waals gap during field cooling. The findings highlight a robust and adjustable exchange bias in van der Waals heterostructures, presenting a straightforward method to enhance other interface-related spintronic phenomena for practical applications. Detailed interface analysis reveals atom migration between layers, forming amorphous regions on either side of the van der Waals gap, emphasizing the importance of precise interface characterization in these heterostructures., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

Covalent organic frameworks (COFs) are promising electrocatalyst platforms owing to their designability, porosity, and stability. Recently, COFs with various chemical structures are developed as efficient electrochemical CO 2 reduction catalysts. However, controlling the morphology of COF catalysts remains a challenge, which can limit their electrocatalytic performance. Especially, while porphyrin COFs show promising catalytic properties, their particle size is mostly large and uncontrolled because of the severe aggregation of crystallites. In this work, a new synthetic methodology for rationally downsized COF catalyst particles is reported, where a tritylated amine is employed as a novel protected precursor for COF synthesis. Trityl protection provides high solubility to a porphyrin precursor, while its deprotection proceeds in situ under typical COF synthesis conditions. Subsequent homogeneous nucleation and colloidal growth yield smaller COF particles than a conventional synthesis, owing to suppressed crystallite aggregation. The downsized COF particles exhibit superior catalytic performance in electrochemical CO 2 reduction, with higher CO production rate and faradaic efficiency compared to conventional COF particles. The improved performance is attributed to the higher contact area with a conductive agent. This study reveals particle size as an important factor for the evaluation of COF electrocatalysts and provides a strategy to control it., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Metal-organic frameworks (MOFs) are a rapidly growing class of materials that offer great promise in various applications. However, the synthesis remains challenging: for example, a range of crystal structures can often be accessed from the same building blocks, which complicates the phase selectivity. Likewise, the high sensitivity to slight changes in synthesis conditions may cause reproducibility issues. This is crucial, as it hampers the research and commercialization of affected MOFs. Here, it presents the first-ever interlaboratory study of the synthetic reproducibility of two Zr-porphyrin MOFs, PCN-222 and PCN-224, to investigate the scope of this problem. For PCN-222, only one sample out of ten was phase pure and of the correct symmetry, while for PCN-224, three are phase pure, although none of these show the spatial linker order characteristic of PCN-224. Instead, these samples resemble dPCN-224 (disordered PCN-224), which has recently been reported. The variability in thermal behavior, defect content, and surface area of the synthesised samples are also studied. The results have important ramifications for field of metal-organic frameworks and their crystallization, by highlighting the synthetic challenges associated with a multi-variable synthesis space and flat energy landscapes characteristic of MOFs., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Controlled synthesis of phase-pure metal-organic frameworks (MOFs) is essential for their application in technological areas such as catalysis or gas sorption. Yet, knowledge of their phase formation and growth remain rather limited, particularly with respect to species such as water whose vital role in MOF synthesis is often neglected. As a consequence, synthetic protocols often lack reproducibility when multiple MOFs can form from the same metal source and linker, and phase mixtures are obtained with little or no control over their composition. In this work, the role of water in the formation of the Zr-porphyrin MOF disordered PCN-224 (dPCN-224) is investigated. Through X-ray total scattering and scanning electron microscopy, it is observed that dPCN-224 forms via a metal-organic intermediate that consists of Zr 6 O 4 (OH) 4  clusters linked by tetrakis(4-carboxy-phenyl)porphyrin molecules. Importantly, water is not only essential to the formation of Zr 6 O 4 (OH) 4  clusters, but it also plays a primary role in dictating the formation kinetics of dPCN-224. This multidisciplinary approach to studying the speciation of dPCN-224 provides a blueprint for how Zr-MOF synthesis protocols can be assessed and their reproducibility increased, and highlights the importance of understanding the role of water as a decisive component in Zr-MOF formation., (© 2023 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

While micromachines with tailored functionalities enable therapeutic applications in biological environments, their controlled motion and targeted drug delivery in biological media require sophisticated designs for practical applications. Covalent organic frameworks (COFs), a new generation of crystalline and nanoporous polymers, offer new perspectives for light-driven microswimmers in heterogeneous biological environments including intraocular fluids, thus setting the stage for biomedical applications such as retinal drug delivery. Two different types of COFs, uniformly spherical TABP-PDA-COF sub-micrometer particles and texturally nanoporous, micrometer-sized TpAzo-COF particles are described and compared as light-driven microrobots. They can be used as highly efficient visible-light-driven drug carriers in aqueous ionic and cellular media. Their absorption ranging down to red light enables phototaxis even in deeper and viscous biological media, while the organic nature of COFs ensures their biocompatibility. Their inherently porous structures with ≈2.6  and ≈3.4 nm pores, and large surface areas allow for targeted and efficient drug loading even for insoluble drugs, which can be released on demand. Additionally, indocyanine green (ICG) dye loading in the pores enables photoacoustic imaging, optical coherence tomography, and hyperthermia in operando conditions. This real-time visualization of the drug-loaded COF microswimmers enables unique insights into the action of photoactive porous drug carriers for therapeutic applications., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Carbon nitrides are among the most studied materials for photocatalysis; however, limitations arise from inefficient charge separation and transport within the material. Here, this aspect is addressed in the 2D carbon nitride poly(heptazine imide) (PHI) by investigating the influence of various counterions, such as M = Li + , Na + , K + , Cs + , Ba 2+ , NH 4 + , and tetramethyl ammonium, on the material's conductivity and photocatalytic activity. These ions in the PHI pores affect the stacking of the 2D layers, which further influences the predominantly ionic conductivity in M-PHI. Na-containing PHI outperforms the other M-PHIs in various relative humidity (RH) environments (0-42%RH) in terms of conductivity, likely due to pore-channel geometry and size of the (hydrated) ion. With increasing RH, the ionic conductivity increases by 4-5 orders of magnitude (for Na-PHI up to 10 -5 S cm -1 at 42%RH). At the same time, the highest photocatalytic hydrogen evolution rate is observed for Na-PHI, which is mirrored by increased photogenerated charge-carrier lifetimes, pointing to efficient charge-carrier stabilization by, e.g., mobile ions. These results indicate that also ionic conductivity is an important parameter that can influence the photocatalytic activity. Besides, RH-dependent ionic conductivity is of high interest for separators, membranes, or sensors., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

The intuitive use, inexpensive fabrication, and easy readout of colorimetric sensors, including photonic crystal architectures and Fabry-Pérot interference sensors, have made these devices a successful commercial case, and yet, understanding how the diffusion of analytes occurs throughout the structure is a key ingredient for designing the response of these platforms on demand. Herein, the diffusion of amines in a periodic multilayer system composed of two-dimensional nanosheets and dielectric nanoparticles is tracked by a combination of spectroscopic measurements and theoretical modelling. It is demonstrated that diffusion is controlled by the molecular size, with larger molecules showing larger layer swelling and slower diffusion times, which translates into important sensor characteristics such as signal change and saturation time. Since the approach visualizes the analyte impregnation process in a time- and spatially resolved fashion, it directly relates the macroscopic color readout into microscopic processes occurring at the molecular level, thus opening the door to rational sensor design., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Graphitic carbon nitrides have emerged as an earth-abundant family of polymeric materials for solar energy conversion. Herein, a 2D cyanamide-functionalized polyheptazine imide (NCN-PHI) is reported, which for the first time enables the synergistic coupling of two key functions of energy conversion within one single material: light harvesting and electrical energy storage. Photo-electrochemical measurements in aqueous electrolytes reveal the underlying mechanism of this "solar battery" material: the charge storage in NCN-PHI is based on the photoreduction of the carbon nitride backbone and charge compensation is realized by adsorption of alkali metal ions within the NCN-PHI layers and at the solution interface. The photoreduced carbon nitride can thus be described as a battery anode operating as a pseudocapacitor, which can store light-induced charge in the form of long-lived, "trapped" electrons for hours. Importantly, the potential window of this process is not limited by the water reduction reaction due to the high intrinsic overpotential of carbon nitrides for hydrogen evolution, potentially enabling new applications for aqueous batteries. Thus, the feasibility of light-induced electrical energy storage and release on demand by a one-component light-charged battery anode is demonstrated, which provides a sustainable solution to overcome the intermittency of solar radiation., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

An approach toward intercalant tunable nanosheet-based Fabry-Pérot sensors is presented. The intercalant tetrabutylammonium significantly increases the sensitivity of the photonic nose sensor to volatile organic compounds with increasing polarity, enabling polarity-driven color-coded vapor differentiation. Paired with the improved millisecond response times for polar vapors, vapor imaging with spatio-temporal resolution is within reach., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Covalent organic frameworks (COFs) are a new class of nanoporous polymeric vector showing promise as drug-delivery vehicles with high loading capacity and biocompatibility. The interaction between the carrier and the cargo is specifically tailored on a molecular level by H-bonding. Cell-proliferation studies indicate higher efficacy of the drug in cancer cells by nanocarrier delivery mediated by the COF., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A 2D nanosheet-based photonic nose for vapor identification is presented. A HSbP2 O8 nanosheet thin-film sensor with resistive readout is developed for the tracking of trace amounts of water, and a photonic HSbP2 O8 /TiO2 multilayer structure is effective at optically distinguishing between chemically similar solvent vapors through analyte-specific host-guest interactions., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new optical touchless positioning interface based on ultrasensitive humidity responsive 1D photonic crystals utilizing the giant moisture dependent swelling capacity of 2D phosphatoantimonate nanosheets is presented. The spatially confined, full spectral color change combined with reversible transparency switching induced by the humidity sheath of a human finger allows for real time, true color lateral finger motion tracking under touchless conditions., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)