Search

Wood is biomass made from lignocellulose, the main raw material for pulp production, both species of hardwood and softwood. Utilization of as much wood as possible, including less-known wood species, is widely open because the availability of good quality wood for industry raw materials is increasingly limited. In general, all wood species can be used for paper pulp. But the selection of types of lignocellulosic material with specific properties, such as physical, anatomical and chemical, play an important role in efficiently using wood as raw materials for pulp and paper. This research was carried out to examine wood properties (specific gravity, fiber quality and cellulose content) of four less-known hardwoods from natural tropical rainforest in South Sulawesi province of Indonesia and assessed their potential use for paper pulp. Those hardwood species comprised of cempedak (Artocarpus integer Merr.), jabon merah (Anthocephalus macrophyllus Hav.), saling-saling (Artocarpus teysmanii Miq.) and simpur (Dillenia serrata Thunb.). The specific gravity determined by the weight of oven dried wood and volume of air dried wood where the wood volume be measured by water immersion method, the fiber dimensions measured through maceration preparations which was made using the Franklin procedure, while TAPPI method used for chemical analysis. In condition to paper pulp raw material, the specific gravity (0.40 – 0.69) is categorized as moderate, the fiber quality is classified as good (class II), and cellulose content (40.12% - 52.47%) is categorized as moderate to high for all those less-known hardwoods. All four less-known hardwoods studied potentially use for paper pulp raw materials. But simpur has the most potential due to long fiber and higher specific gravity. [ABSTRACT FROM AUTHOR]

This study aims to analyze Indonesia's strategy in facing the Voluntary Partnership Agreement on Forest Law Enforcement Governance and Trade (FLEGT-VPA) cooperation agreement between the European Union and Indonesia to improve the export performance of Indonesian wood products to the European Union market. With research, an analysis of the opportunities and challenges that Indonesia intends to face in maintaining the stability of the export activities of Indonesian wood products and improving the quality of these wood products so that they can be accepted based on the standards of the destination country. FLEGT-VPA is a bilateral agreement between the European Union and timber exporting nations to improve forest sector governance and ensure that timber and wood products supplied into the EU are produced in line with partner country laws and regulations. The issue that a developing country like Indonesia wants to experience in an effort to improve the quality of wood products according to the standards of the destination country is a large number of illegal logging, illegal timber sales and others. This study focuses on the pulp and paper industry and uses qualitative analysis research methods and analyzes the data collection techniques from various sources. The increase in the export performance of Indonesian pulp, paper and, paperboard to the European Union from 2016 after the ratification of the FLEGT-VPA shows that the quality of Indonesian products is promising to spread in the European Union market. [ABSTRACT FROM AUTHOR]

Paper waste production in DKI Jakarta according to data from The Jakarta's Environmental Services reaches an average of 40% of total waste production per month for each municipality (kotamadya). On the other hand, Indonesia's necessity of construction development, notably residential home, is increasing constantly along with the amount of Indonesia's population. This condition stimulates innovation of eco-friendly, inexpensive building material with suitable strength. Since 1990's, papercrete, concrete with waste paper as substitution of fine and/ or coarse aggregate, has been studied. Its use for structural materials has evolved and required supporting research for application on larger structural components. In this research, homogeneity aspect of papercrete from domestic waste (office) is investigated along a certain height of vertical beam. To do so, Ultrasonic Pulse Velocity (UPV) propagation measurement on 5 vertical prismatic beam specimens was conducted. By using direct mode transmission, two transducerswere used through 15 cm of width. Rate of propagation can detect the density of concrete at each level since early age of concrete (2 hour after casting). It describes the distribution of material inside. This homogeneity study is beneficial in evaluating papercrete application in real beam structure in the future. [ABSTRACT FROM AUTHOR]

Moodle-based Learning Management Systems have been widely used in learning during the Covid-19 pandemic, especially in Indonesia. In this regard, this study aims to identify and describe the implementation of the Whole Language Approach in improving the ability to write simple scientific papers for students at PGRI Yogyakarta University through the Moodle-based Learning Management System. The method in this research is descriptive qualitative with data in the form of descriptions of the results of research implementation supported by observations, interviews, theoretical studies, and relevant research. The results of this study indicate an increase in the ability to write student scientific papers in the experimental class after using the Whole Language Approach through Moodle-based LMS in learning to write. Several aspects that were assessed were structure, systematics, language use, content coherence, and references used. This increase is indicated by the test numbers before and after the use of the Whole Language Approach through the Moodle-based LMS with mean values of 6.5 to 8.8 in the experimental class, and 6.7 to 7.1 in.the control class. This shows that the use of the Whole Language Approach through Moodle-based LMS is proven to improve students' ability to write simple scientific papers. [ABSTRACT FROM AUTHOR]

Cancer is the uncontrolled growth of new cells beyond the normal limits. The process by which cancers invade and spread to the other organs is called metastasis, this condition became the leading cause of death. One of detection methods that are currently used to detect tumors and metastatic tissues is conducted with radiopharmaceutical of [18F] fluoro-2-deoxy-2-D-glucose ([18F] FDG). This method is quite accurate, but is relatively expensive because it needs PET / CT camera that is still limited in Indonesia. Therefore, this study was conducted to develop other imaging methods using SPECT-CT camera that is cheaper and easy to reach especially for developing countries. Labelling 2-deoxy-D-glucose with technetium-99m (99mTc) indirectly using diethylenetriaminepentaacetic acid (DTPA) as a co-ligand / bifunctional agent has been carried out. The determination of the optimum conditions for the labelling of 99mTc-DTPA-DG were done by varying the amount of reducing agent (SnCl2.2H2O), ligand (2-deoxy-D-glucose), pH, and incubation time. Radiochemical purity of 99mTc-DTPA-DG was determined by ascending paper chromatography and electrophoresis paper. The results showed that the labelling optimum conditions of 99mTc-DTPA-DG was achieved by the number of ligand 2-deoxy-D-glucose as much as 2 mg, co-ligand DTPA 750 µg, 50 µg SnCl2.2H2O, the reaction takes place at pH 6 with an incubation time of 30 min at room temperature. 99mTc-DTPA-DG has a radiochemical purity of 93.16±1.31% and the electrophoresis results showed that there is a difference between the peaks of 99mTc-DTPA-DG with other impurities including 99mTc-DTPA. [ABSTRACT FROM AUTHOR]

Borassus flabellifer L. becomes one of the palm-based commodities in Indonesia that can grow well in dry areas, especially around the north coast of Java Island. An abundant waste of this plant, in the form of leaf midrib and fruit fiber, has a potential as a source of lignocellulose for the paper industry. In the present study, Kraft paper production was conducted to know the influence of the proportion of leaf midrib and fruit fiber of Borassus flabellifer L., and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of Kraft paper. The research method was a Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of Kraft paper. The ANOVA analysis was used to examine the physical quality of Kraft paper. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but insignificant between treatment of Gramatur and tear resistance. The best treatment of sensory tests was Kraft paper with proportion of 50% leaf midrib pulp, 50% fruit fiber pulp, and 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, Gramatur of 162.80 (g/m²), tensile strength of 1.70 (%), and tear resistance of 197.6 (gf). [ABSTRACT FROM AUTHOR]

The pulp and paper making industry is looking for new main raw material based on its physical, chemical and morphological characteristics. Currently in this industry, bagasse is the most useful raw material in pulp and paper industry. The objective of this study is to determine its suitability for pulping. Acacia auriculiformis is a fast-growing tree normally found in Indonesia and Australia. Acacia auriculiformis leaf contains of cellulose, hemi-cellulose and lignin. The range of lignin content in Acacia auriculiformis is 19%-20%. The hemi-cellulose and lignin contents was removed by soda-pulping process using different concentrations as followed; 3%, 5%, 10%, 15% and 20%. In order to determine the optimum pulping conditions for Acacia auriculiformis craft paper, several tests were conducted such as apparent density, tear test, tensile strength test and moisture absorption. It was found that the Acacia auriculiformis fibre treated with 3% sodium hydroxide (NaOH) solutions gave good tear test of the paper. For apparent density test, the best concentration of NaOH used for treating Acacia auriculiformis pulping is at 15%. From the study, the optimum concentration of NaOH in treating Acacia auriculiformis fibre is at 5% for best result in tensile strength. Hence, from the overall tests, 5% concentration of NaOH is the optimum value. From the findings, Acacia auriculiformis fibre has a potential to be used in paper making and food packaging industry. [ABSTRACT FROM AUTHOR]

Indonesia has targeted to reach 23% of renewable energy share by 2025. In order to meet the target, many researchers have focused on the explorations of renewable energy resources. One of the potential solutions to meet the target is the agricultural wastes, include corn cobs and areca nut fiber. In this study, the calorific value of corn cobs and areca nut fiber are tested. The corn cobs and areca nut fiber are collected from the farmers in Sumatera Utara province of Indonesia. In addition, the Paper waste is also tested. A bomb calorimeter of IKA C6000 is used to measure the energy content of the biomass. The results show that the calorific value of Corn cobs and Areca nut fiber is 5573 Cal/g and 4946 Cal/g, respectively.By using the average yearly production of Corn and Areca nut, these calorific values similar to 4,539 TOE and 4,653 TOE, respectively. If the potency can be used to replace the coal as an alternative fuel, this potency will reduce the Greenhouse gas (GHG) emission. The potency of mitigation GHG by replacing Corncob and Areca nut fiber are 18,306 and 18,491 ton of CO2e. [ABSTRACT FROM AUTHOR]

In recent years, with the increase of online learning platforms, obtaining learning behavior data from students, are becoming easy. However, analyzing the data to extract meaningful information remains challenging due to the data volume and complexity. Here, we apply Self-organizing Maps (SOM) to visualize the learning characteristics of many elementary students over many online assignments in mathematics class. As a case study, this research used the data log of MONSAKUN, a digital learning environment that focuses on exercising arithmetic using story-based questions by using a problem-posing approach with the integration of mathematical sentences. Our primary objective is to give intuitive understanding to the teachers regarding the students' performance that subsequently allows the teachers to generate meaningful advices. Here, SOM generates a two-dimensional map that preserved the topological order of high-dimensional learning characteristics data, in which students with similar learning characteristics are located close to each other, while students with significantly different characteristics are distanced from each other. We are interested especially in locating low-performing students, as they are the most important to be given advice by the teachers. By locating the low-performing students and other students in their vicinity on the map, the teacher may be able to use other students as references for improving the low-performing students' performances. The idea is to mimic the learning characteristics of the students designated as references. Due to the learning characteristics similarity, the low-performing students do not need to make drastic changes in their learning styles. It can be expected that by iterating this process over many assignments, the students' performances will gradually be improved. In this paper, we utilized a digital learning platform MONSAKUN, for learning arithmetic used in Japan. In this paper, we present our preliminary results in the form a learning-visualization of characteristics students of analytical and advisory tools and described our future goals for building a more flexible and general tool that can be deployed in Indonesia. [ABSTRACT FROM AUTHOR]

Performance based design is believed to be the next important alternative design method for designing high rise building in Indonesia. This method can also be used to evaluate existing building in order to check the building's performance level. This paper will discuss HALIM High Speed Railway Station project, which is a train station consist of 3 stories with a 226,8 meters long railway on the third floor. Jakarta Building Authority/TABG (Tim Ahli Bangunan Gedung) considers HALIM Station also as a bridge infrastructure rather than just an ordinary building; and not to mention that HALIM Station is the first high-speed railway station in Indonesia. Therefore, in order to make sure the structural safety, TABG requested to do a Performance Based Design analysis to check the response modification factor (R) and its performance level. While there are several ways to perform performance based design, this paper will use non-linear static pushover analysis only. Pushover analysis will be applied on the model based on seismic parameters referred to Indonesian code SNI 1726:2012 and also SNI 1726:2019 even though HALIM Station have been designed before the SNI 1726:2019 is enforced thoroughly. The result shows that all the code methods used on pushover analysis give the same Immediate Occupancy (IO) performance level category. Furthermore, the response modification factor (R) obtained by pushover analysis is greater than the originally defined. Thus, the structural design using the original response modification factor of 8 is on the safe side. [ABSTRACT FROM AUTHOR]

One of the main problems faced in the property management industry especially in Indonesia is limited knowledge or even ignorance of the important role of information technology and information systems in supporting and developing their business. Whereas in a world that is currently heading towards the digital industry and the trend of industry 4.0 which is on the rise, IT and IS components are needed. This paper will explain the important role of IT and IS to help understand their use, and how they can help businesses to grow in the property management industry which is increasingly competitive. The research method used in compiling this paper is in the form of observation of problems in the field. The result of this research is an Information Technology Support Model in the use of information technology to support the property management business. [ABSTRACT FROM AUTHOR]

As a result of the advancement of technology, Indonesia's focus has shifted to the enhancement and simplification of everyday transactions. This is highly common in the widespread use of e-wallets as a payment method for digital transactions involving multiple verification methods, including PIN, Password, Face Recognition and others. This study was conducted by distributing questionnaires to 385 respondents from generation Z in Indonesia who utilized face recognition as a security verification method for digital transactions. The purpose of this paper is to demonstrate the security and efficacy of facial recognition in digital wallet payment verification applications as experienced by users. With the use of the TAM model's analysis, it is proved that all the variables used are significantly related, allowing one to conclude that the safety and efficacy that are possessed are adequate. This paper also supports the growth of trust factors and reasonings for the usage of face recognition in digital transaction self-verification. [ABSTRACT FROM AUTHOR]

According to Indonesia's National Guidelines on Green Buildings (Kemen PUPR No,21,2021) called Penilaian Kinerja Bangunan Gedung Hijau (BGH), green buildings are mandatory for new and existing buildings. As environmental concerns grow, the Government uses these ratings to control energy consumption. A government initiative aims to increase demand for environmentally friendly buildings. This paper evaluates BGH's green building rating system for project certification in two Indonesian cities, Jakarta and Padang Paser Utara. Jakarta is the capital of Indonesia, the largest and one of the most populous urban city in Indonesia. Moreover, the new Indonesia capital city, Nusantara, will be built in Penajam Paser Utara, East Kalimantan. Using the results of this research, recommendations and suggestions can be given related to the design of green buildings both in Jakarta and Penajam Paser Utara. Evaluations will be conducted on simple residential buildings. The results of these studies indicate that designers and architects may have difficulty incorporating this rating systems into their designs. An evaluation of BGH ratings and sustainability analysis can be performed with building information modeling and a conceptual framework is presented toward the end of this paper. A rating system's success depends heavily on discussion among all stakeholders, including architects, engineers, environmentalists, governments, and communities. Indonesian experts in the building sector should take part in and contribute to this project. [ABSTRACT FROM AUTHOR]

This study is based on the problem of microplastics found in water, where plastic packaging is now widely used in food and beverage packaging and raises social concerns about its health effects. The microplastics, small plastic particles with a size of 5 mm or less, found in the body can be toxic, cause hormonal imbalances, heart disease, infertility, and obesity. Research on methods for analyzing microplastics in water is still limited in Indonesia, this study identify and analyze the microplastic content in the drinking water and its saurce in Indonesia using raman spectroscopy method. The analysis of microplastics content was performed on various drinking water samples and their sources. The test included 7 water samples from different brands, water sources and different water bottle industries in Indonesia. Content analysis was performed in three stages, starting with the preparatory stage, the filtration process. The filtration process is performed using filter paper that matches the size of the sample to be inspected. In addition, various particles trapped in the filter paper were analyzed under a microscope to separate the microplastic particles. At last, a raman spectroscopy test was performed to determine the type of microplastics present in the contents of the water sample. Through the analysis and study of the content of various water samples carried out, the analyzed water content found various types of microplastics in the form of fragments, fibers, filaments, and films, most of which were PET (Polyethylene terephthalate). There are also found to be polypropylene and PVC (Polyvinyl chloride). [ABSTRACT FROM AUTHOR]

The steel industries account for 6% of the world's CO2 emissions. The number of emissions will continue to increase as the steel industry in Indonesia grows. Generally, steel production uses blast furnaces which can produce large CO2 emissions. The blast furnace process emissions called blast furnace gas (BFG) contain 20.7% mol of CO2. The high CO2 content also causes the calorific value of the gas to be low, so the gas must be purified to increase its calorific value to be used for power generation. In addition, the steel industry also produces steel slag as waste with a high CaO content (45.2%) but with low economic value. To increase its economic value, CaO content can be used to absorb CO2 from BFG to produce Precipitated Calcium Carbonate (PCC). The use of PCC is very broad for various industrial needs, such as a filler in the paper industry which can increase paper brightness. Therefore, the "Precipitated Calcium Carbonate from Blast Furnace Gas and Steel Slag" plant is expected to be a solution to reduce CO2 emissions from the steel industry. BFG and steel slag as raw materials were obtained from PT. Krakatau Posco. The PCC production process consists of three main stages, namely: (1) Pre-Treatment Steel Slag; (2) Carbonation; and (3) Purification. In the pre-treatment stage, the pH-swing method was used to extract CaO with NH4Cl solvent using pH control. The use of NH4Cl solution is advantageous because it can be recycled. This process obtained a solution of CaCl2 and NH4OH, which was then reacted with CO2 from BFG in a bubble column reactor, resulting in a carbonation process. In the reactor, PCC (CaCO3) and several impurities are formed. The PCC solids formed will then be filtered, dried, and reduced in size so that the moisture content and size are under PCC specifications for the paper industry. Besides producing PCC, purified BFG will be recycled and used as fuel for power generation. The plant location is integrated with PT. Krakatau Posco in the industrial area, Cilegon, Banten, West Java, with a production capacity of 12,750 tons/year. From the results of the economic analysis, with the capital expenditure (capex) of about IDR 337 million and operational expenditure (OPEX) of about IDR 89 million: the payback period is about 6.35 years, and the break-even point (BEP) is 32.38%. [ABSTRACT FROM AUTHOR]

The need for renewable energy is highly increasing worldwide to fulfil energy demand as well as reduce the impact of global warming. Indonesia as the most extensive archipelago face real challenge to power its remote areas with green electricity. This paper assesses economically the idea of hybrid power plant of solar and/or biomass to electrify Indonesian remote areas with green electricity. Furthermore, the carbon credit as an additional income of this project is estimated using CDM methodology. The project is proposed in Sakti, Batukandik, and Batumadeg villages in Nusa Penida Island, Bali; the ER are 7460.57, 2587.10, and 9044.84 tCO2e/year, accordingly. The IRR is analyzed under two scenarios: the initial electricity cost of USD 0.15/kWh and the reduced cost of USD 0.10/kWh including carbon credits and biochar sales. The sensitivity analysis is conducted to observe the effect of most tentative variables towards the IRR. Furthermore, determining the feasibility of this project by analyzing the ERR is assessed to be important, whether it is profitable for the community or not. For the ERR analysis, there are two results calculations. The ERR value with the application of carbon credits shows 32.66%. In comparison, the ERR value without the application of carbon credits shows 28.19%. These values are obtained from several parameter calculations in the ERR analysis in this study. It consists of a consumer surplus, which is computed from the benefits obtained by PLN. Then, the producer surplus and job increases are computed from the benefits obtained by the community if this project is executed. This paper result has essential role in contribution to social, economic, and environmental goal for sustainable development and supporting national economic activities. [ABSTRACT FROM AUTHOR]

COVID 19 disease has spread worldwide, disrupting the economy, society, education, and health. It became crucial to understand the transmission curve and identify the best action in combating this highly transmissible epidemic. Epidemiological parameters of the deterministic Susceptible-Infected-Removed (SIR) model are widely used in explaining the characteristics and behavior of the disease spreading. Disease like COVID-19 is highly influenced by the uncontrolled factors of randomness, hence in this paper, the deterministic susceptible-infected-recovered-death (SIRD) model is extended to the stochastic SIRD (SSIRD) model. SSIRD model takes into consideration the noisy behavior of the process which explains the uncontrolled effects of the COVID-19 outbreak. The epidemiological parameter of the model changes throughout the epidemic due to external factors such as enforcement and public obedience to the control measures as well as the changes in healthcare facilities. These parameters need to be estimated. This paper estimates the epidemiological parameters of the SSIRD model using the Markov Chain Monte Carlo (MCMC) method of the Metropolis Hasting algorithm. The COVID-19 data from Malaysia and Indonesia are used and the dynamical behavior of the COVID-19 outbreak in both countries is simulated. The results show the parameter changing due to the uncontrolled factors influencing the trend of the pandemic curve. [ABSTRACT FROM AUTHOR]

The implementation of Community Activities Restrictions Enforcement (PPKM) during the Covid-19 pandemic reduced activities in the transportation sector. This paper presents the measurement of Carbon Monoxide (CO) concentrations during the PPKM in Makassar City, Indonesia. The samples were collected weekly from August to September 2021 from two traffic-heavy roads using Tedlar bags and a vacuum pump and then analyzed using the Non-Dispersive Infrared method (NDIR). Results showed that the average concentrations of CO on the first street in the morning, midday, and afternoon were 826.63±83.34 µg/m3, 685.65±57.43 µg/m3, 861.6±59.79 µg/m3, respectively; and on the second street were 875.46±77.80 µg/m3, 741.80±62.95 µg/m3, 833.04±44.80 µg/m3, respectively. These CO concentrations measured during the PPKM are lower than those measured before the PPKM on the same sites, reported in another paper. The concentrations are also much lower than those of the Air Quality Standard in Makassar, 30,000 µg/m3. This finding implies that similar policies to reduce traffic and pollution, such as car-free-day, should be enacted to improve air quality. [ABSTRACT FROM AUTHOR]

Urban planners often have a good vision for the urban environment, but that vision is usually limited to visual aesthetics. The sound-based qualitative perspective of the urban environment, which includes sonic and ecological diversity in urban design, is generally ignored. The soundscape approach can be the most effective system for application in urban planning. This paper aims to apply the soundscape approach to urban planning and explore the impact of sound on the formation of urban open spaces through a case study of the Surakarta City parks Indonesia. A mixture of quantitative and qualitative research methods was used. The quantitative method was used to measure background noise using a sound level meter and visualize with a surfer mapping software. The qualitative method was used to observe behavior, the physical environment and perception through interviews. In this context, the paper concludes that the concept of the soundscape is a well-established theme in acoustic environments to identify acoustic data that is compared with the human perception of the environment. Human perceptions of the natural environment and elements of natural sounds, as physical factors, can shape human settlements into a better living environment. [ABSTRACT FROM AUTHOR]

Advancements in technology are a double-edged sword in terms of nuclear safety and security. In recent years, the increased use of drones or unmanned aerial vehicles (UAV) has created both opportunities and new threats to nuclear security. UAV intervention has a wide range of applications that could be a threat to nuclear facility, including aerial shooting, the possibility of stealth smuggling of prohibited substances and objects both to and from nuclear facility protected areas, or sabotage with potential damage to critical infrastructure elements, blackouts, and looting. As a result, nuclear facilities that lack effective means of detecting and combating UAV may be vulnerable to the spread of dangerous materials and terrorist sabotage attacks. Considering the various UAV threats, nuclear facilities must take practical measures to protect themselves at the facility level based on the established UAV threat criteria such as early detection and identification, appropriate response and disablement measures. The action taken to ensure that a nuclear facility is prepared to withstand UAV threat include ensuring that regulations exist as a legal basis and that a nuclear facility has a Physical Protection System (PPS) capable of carrying out detect, delay, and response functions. Many international governments have issued warnings to small UAV (drones) owners, urging them to obtain official licenses before flying their photography drones. The use of UAVs in Indonesia is governed by Regulation of the Minister of Transportation of the Republic of Indonesia Number PM 27 of 2021, PM 37 of 2020, PM 63 of 2021, and PM 34 of 2021. The purpose of this paper is to examine the readiness of PPS in Serpong Nuclear Facility, and the result of this paper will be used as a recommendation for developing the PPS and/or the nuclear security regulation in Indonesia. [ABSTRACT FROM AUTHOR]

The implementation of green building is believed to be a key factor in achieving sustainable development in the building sector. The Green Building Council Indonesia is responsible for the development and deployment of green buildings in Indonesia, and has released version 1.2 of the Greenship rating tools for evaluating new green buildings. The use of renewable energy sources in green buildings is highly encouraged, with one point awarded for every 0.5% of energy usage covered by renewable energy, up to a maximum of five points. The installation of rooftop PV systems is a popular choice for renewable energy in many governmental green-rated buildings, but it is important to determine the ideal capacity to prevent overpriced installation costs. This paper proposes a method where the focus is on gaining maximum points in renewable energy and minimizing investment costs, rather than maximizing installed capacity. This approach can reduce capacity by up to 68%. Another important consideration is choosing the optimum grid connectivity type, and the paper discusses the options of on-grid or zero export schemes. Zero export scheme is chosen for this case since the capacity of the PV system is much smaller than the grid power connection. [ABSTRACT FROM AUTHOR]

Cancer is the second leading cause of death globally and increasing every year, including in Indonesia. Promethium-149 (149Pm) is one of beta-emitting (Eβ-max of 1.07 MeV and T1/2 of 2.21 days) radiolanthanides that can be used for therapeutic application. Radioisotope of 149Pm can be produced with high specific activity that was suitable for labeling of biomolecule as a targeted radiopharmaceutical for cancer therapy. Radiochemical separation of 149Pm from irradiated of neodymium oxide (Nd2O3) target with 98.4% neodymium-148 (148Nd) isotope enrichment has been carried out based on extraction chromatography method using LN (Eichrom) resin column. The target material was irradiated at Bandung TRIGA 2000 reactor. Radiochemical purity the final product of 149PmCl3 radioisotope was determined using paper chromatography and paper electrophoresis methods. Radionuclide purity of 149PmCl3 solution was determined using a gamma-ray spectrometer equipped with HP-Ge detector and a multichannel analyzer (MCA). The results show that the optimum condition on separation of 149Pm from irradiated of Nd2O3 target with 98.4% 148Nd isotope enrichment was obtained using 1.5N HNO3 solution at temperature of 80 °C as mobile phase. The yield of 149Pm obtained from the separation was 97.8 ± 2.1%. The final product of 149PmCl3 radioisotope has physico-chemical characteristic that meet the requirements for nuclear medicine applications with radiochemical purity and radionuclide purity of 99.7 ± 0.2% and 99.9 ± 0.1%, respectively. The solution of 149PmCl3 was clear, with the pH of 1 and stable for 1.5 weeks at room temperature. [ABSTRACT FROM AUTHOR]

While cigarette use has been addressed as a global health problem, most smokers still find difficulties and barriers in accessing health facilities or finding a suitable method to quitting the habit. This paper will discuss the study exploring a self-help group on an online-based platform, namely Facebook, in Indonesia. This study adopted quasi-experimental, with pre and post-test using the control group as the previous ethical clearance. The respondents consisting of thirty-two smokers were recruited on non-probability sampling with the purposive sampling method. The data were collected by using a valid (r=0,666) and reliable (r=0,846) Richmond Test motivation questionnaire. Wilcoxon and Mann-Whitney tests were used to analyse them further. The study revealed low participation on the online platform with discussion based on a self-help group. There was no significant motivation improvement among the experimental group after the intervention, as well as no significant difference in motivation improvement between the control and the experimental group upon pursuing the program (p>0,05, t=0,058). In terms of low involvement, an online platform was less effective in improving quit-smoking motivation among smokers. Further research is needed to develop more interactive and longer interventions to facilitate cost-effective smoking cessation through social media. [ABSTRACT FROM AUTHOR]

Massive utilization of firewood faced problems related to deforestation and harmful emissions. Indonesia experiences the fastest deforestation rate in the world (1000 km2/year). Household air pollution (HAP) resulting from the smoke of burning firewood causes premature deaths of around 165,000 to 68,000 each year in Indonesia. Liquified petroleum gas (LPG) and electricity are projected to be clean energy sources for households; however, switching to LPG fuel or electricity for remote rural households is constrained by their limited financial ability. Therefore, shifting the energy supply of rural communities from wood to fuel from agricultural waste can reduce the risk of deforestation, while reducing HAP is done by forming it into bio-briquettes. Manufacturing rice husk (RH) or carbonized rice husk (CRH) for bio-briquette fuels is intended to solve the problem of massive woody biomass and improve the combustion process to reduce the risk of HAP. This paper specifically investigates and compares the physical and chemical properties of RH and CRH as a first step to verifying their potential as bio-briquette materials. [ABSTRACT FROM AUTHOR]

This paper depicted the subsurface structure in geothermal prospective area in Mount Talang, West Sumatera, Indonesia. Data were gathered from magnetic field yielded from Miligauss Meter at 144 sites surrounding Garara Hot Spring. Magnetic anomaly value was obtained from the raw data and was corrected by using IGRF and diurnal variation. Reduction to pole and upward continuation were applied to remove noise and separate local and regional anomalies. It was then sliced, and subsurface modeling showed that the incision consists of 4 types of layers. The topmost layer was identified as volcanic sedimentary rock dominated by clay. The second layer was rock formed from old pyroclastic deposits, young volcanic rocks, sediments, and lava located at a depth of 250 m to 1800 m. These two layers were assumed to be cap rock. The third layer was interpreted as old volcanic rock consisting of andesitic lava rock and clay alteration at a depth of 1200 to 3800 m. The fourth layer at a depth of more than 3800 m was composed of rhyolitic igneous rocks and metamorphic rocks. This layer was identified as a layer that was a source of heat or hot rock which has continuity with the magma of Mount Talang. [ABSTRACT FROM AUTHOR]

Longitudinal data consists of repeated observations made from time to time on each individual. The correlation between observations within the same unit in longitudinal data makes the Generalized Linear Mixed Model (GLMM) an appropriate method for the analysis of longitudinal data. GLMM will not have a good estimation if the data contains missing values. To solve this problem, the imputation method is used. This paper discusses two imputation methods, namely mean and median row. The missing value is filled with the average or median value of all the values in the subject. It is known that poverty cases in districts/cities in Eastern Indonesia contain the missing value. Thus, poverty cases in these areas can be used as case studies of the data used. The purpose of the study is to form a GLMM model longitudinal with the Poisson response variable on poverty data in Eastern Indonesia to obtain factors that positively and negatively affect poverty in eastern Indonesia and obtain the right method of median row and mean row in the imputation methods to handle missing values based on the AIC value of the resulting estimate using GLMM. A mean row method is recommended to impute the missing values in Longitudinal data of poverty cases in Eastern Indonesia's districts/cities. [ABSTRACT FROM AUTHOR]

Due to operational and safety reason the gas obtained from the oil production generally will be burned into gas flare. Furthermore, elimination of gas flaring is a significant and essential step toward ensuring that significant natural resources are not wasted and mitigating climate change. In 2015, a program called Zero Routine Flaring (ZRF) initiated by the World Bank is targeting by 2030. The ZRF program is managed by Global Gas Flaring Reduction (GGFR) and obligates oil corporations and governments to put an end to recurring flare-ups by 2030. Based on the volume of routine gas flaring, current state of flaring gas is 162 MMSCFD. With this number, Indonesia ranks 16th worldwide [1]. The objective of this paper is to review the Indonesian government's regulation of routine gas flares due to the World Bank's initiative about ZRF by 2030. The fact shows that the Indonesian government has issued regulations related to gas flare management through the Minister of Energy and Mineral Resources Regulation No. 17 year 2021 [2] and Minister of Energy and Mineral Resources Regulation No. 30 year 2021 [3]. A review of those regulations has been done. Along with the regulations, Oil and Gas companies in Indonesia are also making efforts to reduce routine gas flares, for example, by utilizing gas flares as boiler and gas turbine fuel. These actions successfully decreased Indonesian routine gas flares from 342 MMSCFD in 2012 to 162 MMSCFD in 2021. However, Indonesia's routine gas flares have not yet suited the criteria set by the Government of Indonesia. In conclusion, to achieve the ZRF targets by 2030, oil companies and the Governments, must assist each other in this journey. In addition, it is necessary to improve regulations and gas flare monitor programs and provide fines and incentives for companies that meet the gas flare criteria according to the regulation. [ABSTRACT FROM AUTHOR]

Indonesia has the largest geothermal potential in the world, recently Indonesia only utilizes 7% of their geothermal to generate electricity. To increase the electricity production, the development of new geothermal power plant is needed, also the optimization of existing geothermal power plant. There are several types of geothermal powerplant system, depends on steam condition and utilization. This paper aimed to analyze the heat loss occurred in geothermal powerplant system X, also compare the cooling system between direct contact condenser (DCC) and indirect contact condenser (ICC). The comparison study has been simulated by using ASPEN HYSIS software. The method used to analyze the heat loss was by calculating exergy in each stream, so that we can calculate the exergy destruction at each process equipment. The result shows that the turbine produced 60 MW of electricity and largest heat loss occur on cooling tower with percentage about 17.64% for ICC system and 18.41% for DCC. [ABSTRACT FROM AUTHOR]

Lowering Covid-19 cases globally and nationally provides a positive indication of economic growth, especially in Batam City, Indonesia. This condition is also followed by increased electrical energy consumption, particularly in residential houses. This paper presents an electrical energy audit process of a residential house using the IKE (Energy Consumption Intensity) parameter. The audit was conducted in a home with a building area of 226 m2 and an electrical capacity of 4400 VA. The result shows that the total electricity consumption of such a house is 1,266.34 kWh per month, to which the air-conditioning system contributed the most prominent electricity consumption of the whole facilities in the house. Providentially, the score of IKE is less than 8.5, which means such a residential house is categorized as very efficient energy consumption. Furthermore, the self-evaluating checklist technique has carried out to find the main factor that affects the electricity consumption of the air-conditioning system. Regarding the highest rating score on the self-evaluating checklist of air conditioning systems, the ceiling has a score of 77.5%. This result means that the ceiling needs to be evaluated to reduce the heat load of the house, which in turn reduces the electrical energy consumption of the air conditioning system. Finally, this work can use as an initial audit framework for assessing electrical energy consumption in residential houses in Indonesia. [ABSTRACT FROM AUTHOR]

The palm oil industry plays a vital role in Indonesia's development. As the world's largest CPO producer and exporter, Indonesia earns substantial gains in foreign currencies from palm oil, and its derivative trades bring stability and security to Indonesia's economy. Despite those significant benefits, the sector has drawn both national and international criticism for its negative environmental and social impact. This paper aims to conduct a systematic LCA evaluation guided by the International Sustainability and Carbon Certification (ISCC 2015) methodology to establish an ecological profile of CPO production. A GHG Audit was conducted by using activity data derived from the company's record data and from other available literature. Following the methodology prescribed by the ISCC, this study found that 0.64 KgCO2eq is emitted per KgCPO produced. [ABSTRACT FROM AUTHOR]

Padang is one of the metropolitan cities in Indonesia and the capital city of West Sumatra Province. As a metro city, traffic jams are one of the city's problems, especially at adjacent intersections. Isolated traffic management applied in the city has yet to successfully solve the problem. This paper aims to evaluate the performance of some intersections if traffic signal coordination is applied. In this simulation study, PTV Vissim software was used. The study's findings indicated that traffic signal coordination would improve the traffic performance of the intersection. [ABSTRACT FROM AUTHOR]

Construction industry as one of the sectors that causes climate change must start paying attention to environmental impacts. Through the provision of numerous ecosystem services, Green infrastructure (GI) is one of the essential strategies for achieving sustainable development since it can effectively coordinate social, economic, and environmental growth. Thus, GI has been highlighted as a promising strategy to aid cities in adapting to climate change. 197 papers published between 2016 and 2021 were organized and classified using the 7th version of Publish or Perish software as part of this study's literature review methodology. Results show that there has been a significant growth in research on green infrastructure in recent years, with Sustainability Journal dominating the field. The initial top three cited journals that cover GI research are China Earth Sciences, Construction & Building Materials, and Cities. Another set of findings reveals that issues with water, materials, heat, air pollution, and policies-regulation & cost have been particularly focused on. Future research is needed and quite promising, such as: green materials, solutions to water & flood problems, urban heat, and GI regulation are topics that need further research, especially in Indonesia. [ABSTRACT FROM AUTHOR]

The design of the literature review study is how the development of research results on the Science, Technology, Engineer Mathematic (STEM) Approach in Physics Learning in a bibliometric way and Challenges trends in physics learning research that integrates STEM. An article search used the Scopus Base data conducted on June 19, 2023. Data was collected as metadata, retrieved from Scopus data with the keywords STEM AND physics AND learning from 2006-2023. The results of data collection obtained were 329 articles downloaded with their metadata stored in CVS forms, and the results were rechecked to determine whether all the articles matched the keywords. The data results are in the form of document types consisting of articles, book chapters, conference papers, and conference reviews. Visualization processing with R programming software is carried out with four visualizations consist of annual scientific production, Wordcloud, and Network visualization. The results of this analysis study show that the trend theme of the STEM Approach in physics learning is learning media and computer-aided instruction with a significant annual increase every year in 2020 there were 54 articles, in 2021 there were 94 articles, in 2022 there were 48 articles. Meanwhile, the three largest scientific production countries are the USA with 76 articles; Indonesia with 51 articles; and Thailand with 14 articles. Research trends in 2023 are learning media and your STEM Challenges can be seen from the less trending topic is the influence of STEM on the Creative thinking and critical thinking skills. [ABSTRACT FROM AUTHOR]

This paper describes the development of a blended-based sustainable training model. The blended learning model is used to overcome participants' limited time constraints in ongoing training to increase the competency of tourism village community empowerment facilitators. The research method used is development research. The research subjects were community empowerment facilitators in tourist villages, DKI Jakarta, and West Java. The data collection techniques used were observation, interviews, and literature review. Data analysis in this research was carried out using qualitative descriptions. The study results show that conceptually implementing a blended learning-based continuous training model increases facilitators' competence in empowering the Tourism Village community through the stages of input, process, and output analysis. In the input component, the training manager maps the competency of the facilitator's objective conditions; the training process component uses an andragogy approach where participants have self-concept practical experience and can overcome the problems they face; and the output component produces tourism village facilitators who master three competency elements, namely basic, core and special. [ABSTRACT FROM AUTHOR]

Researchers and experts have developed various techniques, models, and methods to predict the price movements of cryptocurrencies, especially Bitcoin. However, among the many techniques studied in the literature, there is still a lack of focus on mining, creating, and developing datasets with specific patterns for predicting the next cryptocurrency price movement. This is an exciting reason to conduct further research. A web-based Patterned Dataset Application and a Telegram bot were constructed to address this issue. These tools read the price position of each cryptocurrency and predict the next price direction based on the last position indicated by the Patterned Dataset Application. The experiment's results show that when the Patterned Dataset Application shows a diamond crash position, it is time to make a purchase; conversely, when it shows a diamond moon position, it is time to make a sale. It is hoped that by utilizing the Patterned Dataset Application, potential losses can be minimized, and there is more potential for profit in cryptocurrency trading. Even though the initial data source comes from Indonesia's most prominent digital cryptocurrency trading market, according to coinmarketcap, namely Indodax, the results of this patterned dataset application can often describe the same cryptocurrency conditions globally. The novelty of this research is to produce a new way of predicting the next cryptocurrency price movement using patterned datasets. At the end of this paper, it will be proven that hypothesis 1 and hypothesis 2 on the results of the patterned dataset are true. [ABSTRACT FROM AUTHOR]

Higher Order Thinking Skills (HOTS) is one of the requirements that must be owned by innovative learning. In its development, teachers are required to be able to choose the right learning strategies, not only in planning and assessment but also in the learning process. This paper explores the lesson plans made by teachers in developing learning that empowers HOTS on plant material in senior high school. The research approach is qualitative research with descriptive methods. The documents used in this study were taken from students taking curriculum and learning design courses. The samples used were eight lesson plans using plant themes. From the results obtained, there are four learning approaches developed, including the scientific, concepts, environmental, and STEM approaches. The learning models developed also vary, including Discovery Learning, Project Based Learning (PjBL), Problem-Based Learning (PBL), and Cooperative Learning. The development of these approaches and models is expected to be an inspiration for biology teachers to develop plant material learning in high school, especially in facing the new challenges of the implementation of a new curriculum in Indonesia called Kurikulum Merdeka. [ABSTRACT FROM AUTHOR]

The agricultural practice in upland landscape area throughout Indonesia provide examples of complex socio-ecological systems experiencing rapid socio-economic and environmental transformations in response to sustainable development challenges. There is a close relationship between agriculture productivity, biodiversity conservation, and sustainable landscape management. This paper examines the biodiversity and conservation of food plants for food security toward sustainable development in the uplands of Indonesia. A desk study with descriptive qualitative was implemented in this paper. The data were collected from secondary sources and thus analyzed through understanding and synthesizing the literature. We review the studies between 2007-2022, agriculture commodities were the dominant food plants found in the farmland and home garden in Sumatra, Java, Sumbawa, and Papua, for subsistence and commercial purpose, especially for horticulture commodities. The results showed that there is a challenge today in how to push agricultural systems so as to promote an agroecosystem, and it is clear that sustainable agriculture both promotes and is enhanced by food plant biodiversity. In order to reduce environmental trade-offs and social and institutional tensions, economic expansion and conservation agendas in the upland should be matched. It is expected that protecting food plants in upland areas will promote sustainable growth and ensure community food security. The biodiversity conservation of food plants can be implemented through sustainable landscape management. [ABSTRACT FROM AUTHOR]

The rise of private space actors marks the Space 4.0. era. The participation of private actors contributes to the economy, GDP, and technology advancements. Realizing this, States try to accommodate and nurture their space industry, including Indonesia. To do so, learning from State practices is important. New Zealand and Singapore are the perfect examples of new space-driven countries that managed to foster their national space industry rapidly. This paper compares and analyses how the three countries work to enhance their new space from the law and policy perspective and what lessons Indonesia can learn from the other two countries. It is concluded that the three countries have a fairly strong policy or regulatory base to develop space industry. However, Singapore and New Zealand are providing first-hand support like grants to keep space companies thriving. Direct involvement with business-related ministries such as economics or industry is also imperative to ensure the longevity of space projects or funding programs. Their space policies reflect these measures. To foster its national space industry, this paper recommends Indonesia to push its space policy to be more proactive, focused, and coordinated with the relevant stakeholders. [ABSTRACT FROM AUTHOR]

Security, safety, and sustainability are concepts that have long been discussed in space governance issues to prevent any damage. However, the challenges of an increasingly congested and complicated space environment make the functional loss and even the space assets themselves bigger and need to be mitigated. The resilience approach was then developed by several countries in response to these challenges. Indonesia also faces the same challenge even though its space assets are still relatively few. Nevertheless, the application of the concept of resilience in its space activities has not yet been elaborated on in its own space policy as well as in the discourse of resilience policy in general. Therefore, this paper discusses the development of the concept of space resilience in the literature and reflects it into policies and practices in Indonesia. The study method used is desk research. In the end, this paper finds that the reinvigoration of Wawasan Nusatara concept as Indonesian geopolitics could be the focal point for introducing space resilience. [ABSTRACT FROM AUTHOR]

This paper show our preliminary results on solar acitivty effect to the low-latitude Sq field. We analyzed one solar cycle of geomagnetic data observed at Biak station Indonesia during 1992-2004 to show the dependence of Sq field amplitude to solar activity. In this paper, the monthly sunspot number has been used to represent the solar activity. We found that the amplitude of Sq field following the trend of sunspot number. Also, we analyzed the seasonal variation of Sq field and found that the amplitude of Sq field during equinoxes are larger than solstices. This results show that low latitude Sq field are influenced by the solar radiation. [ABSTRACT FROM AUTHOR]

The Indonesian construction industry has a very low rate of women involvement. Previous studies have investigated the barriers and challenges of women participation in this industry including gender discrimination, harassments, inflexible working hours and limited opportunities for women. Despite a range of efforts and initiatives to increase the involvement of women, this industry remains a male dominated sector in Indonesia. This paper aims to quantitatively identify the key barriers to female students' career choice in the Indonesian construction industry. It employs a comprehensive literature review, followed by a questionnaire survey distribution. A total of 89 valid responses was obtained and analysed using RII and Factor Analysis. The analysis found that lack of confidence is the top barrier followed by safety issues and inequality in the recruitment process. In addition, this study has also established five clusters of barriers to female students' career choice, namely: male dominance, working environment, stereotyping, nature of the jobs, and gender discrimination. This paper provides a crucial study on career choice by minorities in the construction industry and thus, is an important step to recognize diversity and equality efforts in the industry. [ABSTRACT FROM AUTHOR]

The energy demand in Indonesia increases continuously, but its availability is thinning out. Therefore, an alternative energy where the source is bountiful but has not been used properly is needed, such as used paper. This used paper is usually produced by office activities, educational institutions, even home activities. The used paper contains very high cellulose since the lignin contained in the raw material has been removed during the pulping process. Cellulose is a polymeric compound consisting of glucose monomers. The hydrolysis of cellulose is able to produce glucose which subsequently can be fermented into bio-ethanol. A study on hydrolysis of used paper to produce glucose as the raw material of bio-ethanol is urgent to conduct. The present work studied the hydrolysis of used paper using acid catalyst (sulfuric acid, chloride acid), which was heated in a microwave equipped with a cooling set up to avoid the evaporation of hydrolysate. The level of glucose in the hydrolysate was affected linearly by the acid concentration, hydrolysis time, and microwave power. Using chloride acid 2N for 7 hours, the hydrolysis produced glucose with a level of 76.542%, and 59.532% for sulfuric acid 3N. [ABSTRACT FROM AUTHOR]

Aquatic animals have been long time as a source of nutrition. Because human population grows, the demand of aquatic food also grows. It results in wild stock of aquatic animals is depleted and becomes insufficient to supply people's demand. Due to this reason, aquaculture farms are developed and grow. The water of aquaculture pond must be unpolluted and sufficient concentration of dissolved oxygen (DO). Oxygen is available for free in the atmosphere, but it requires a tool, aerator, to dissolve oxygen in the atmosphere into water efficiently. In Indonesia, mechanical paddle wheel aerator is popularly used. A paddle wheel aerator requires electricity to turn the electric motor, then the blades. A lot of aquaculture farms are in remote areas where electricity grid is minimum or even unavailable. In this paper, a concept of individual net zero-energy paddle wheel aerator is proposed. It had been tested 800-Wp solar PV system is able to supply enough electricity to run the aerator with 0.75 HP AC motor. The concept of small package solar PV system for individual aerator makes the system simple and the user can develop the solar PV system for whole facilities gradually depending on the need and available capital. Since the supply of solar energy is intermittent, battery system is necessary to smooth the electricity supply and to provide reference voltage. The research also found that the aerator with 8 blades and 16 holes per blade results in effective DO enhancement. [ABSTRACT FROM AUTHOR]

This study objective is to produce flipbook on integral topic for 11th grade student that are valid and practical. Based on this paper, hopefully teacher can know how to develop flipbook especially in integral topic. The type of the research is design research with development model used is Plomp model that consisting of two phases: (1) preliminary research, (2) prototyping phase. The subjects of this study were 11th grade students at Sekolah Menengah Atas Pembangunan Laboratorium Universitas Negeri Padang, Padang. The research instruments were interview guides, observation sheets, validity sheets, student practicality sheets, and teacher practicality sheets. This research has produced a very valid and very practical flipbook. Teachers and students gave a good response to this flipbook because it helps them in the learning process. Students said that learning to use flipbooks was more interesting and very useful in today's learning situations. [ABSTRACT FROM AUTHOR]

The Indonesian government has taken several policies to break the chain of transmission of the COVID-19 virus infection since the spread of this virus variant was first discovered in March 2020 in Indonesia. One of them is to require everyone to get vaccinated. This national vaccination program has been started since early January 2021 until now and expected to be one of the solutions to control the spread of coronavirus in Indonesia. This paper presents robust k-means to show the cluster of the spread of COVID-19 in Indonesia after the implementation of the vaccine policy for Indonesian citizens. The k-means algorithm is an unsupervised machine learning method. This method is well known in clustering. This is a partition clustering algorithm which is widely used in practice but in general, this method is sensitive to the presence of outliers. The variables considered in this study are the number of deaths, the number of recovered patients and the number of patients. Experimental comparisons are made with the basic k-means and robust k-means algorithm. It seems that for data on May, 2021, the cluster with k=3 in the robust case will provide closer risk levels of the provinces in Indonesia with their risk in reality, namely provinces with high, mid and low-level risk. [ABSTRACT FROM AUTHOR]

The literature review found that only a few studies in Indonesia have been applied to modeling peatlands fire occurrences. In our previous studies, various machine learning classification approaches are applied to predict forest fire occurrence in the peatlands area. Our previous empirical study found that the datasets of fire hotspot areas, especially for data from the South Kalimantan area, need to be more balanced. In this paper, we consider ADAptive SYNthetic (ADASYN) method for the sampling approach to balance the datasets. We found that by balancing the data, the performance of the classification method can improve about 2-4%. [ABSTRACT FROM AUTHOR]

Coronavirus Disease (COVID-19) pandemic has emerged as one of the biggest challenge faced by researchers, especially in public health system. Since the virus spread and mutates quickly, strategies are needed so that the public health system doesn't collapse due to overcapacity. Modeling and forecasting accurately the COVID-19 daily new cases is very important to understand and help carry out risk management for the outbreak control. To obtain the estimation of the Indonesian daily cases of COVID-19 based on daily confirmed cases, we present a comparative study between three deep learning methods in this paper: Long Short-Term Memory (LSTM), Gated Recurrent Unit (GRU), and Convolutional Long Short-Term Memory (Conv-LSTM). The data used is daily confirmed cases from September 1st to September 7th, 2021. The result is Conv-LSTM model produces better performance than other methods. Here we also provide 7 day out-of-sample forecast for daily cases from September 1st to September 7th, 2021 using each model. [ABSTRACT FROM AUTHOR]

This paper outlines our efforts in foresight technology, utilizing the TASDA framework, with a specific focus on the utilization of scenario planning. Scenario planning is a valuable tool for aiding management in comprehending potential future scenarios and making well-informed decisions. In this context, we are applying it to the development of research topics concerning Indonesia's maritime industry. This research aims to enhance stakeholders' understanding of issues related to the growth of maritime research topics in Indonesia, encompassing aspects such as tourism, oceanography, fisheries, infrastructure, energy, and mineral resources. Moreover, the study investigates changes in the strategic environment, including socio-political and economic factors that influence the progression of maritime research in Indonesia. We employ scenario planning analysis to chart the strategic environment and its ramifications on maritime research topics in Indonesia. This includes an examination of both global and national trends. We formulate driving and uncertainty factors within the framework of scenario planning analysis, which are then crafted into strategic environmental scenarios. The outcome of this scenario planning exercise yields four distinct scenarios. This methodology is well-suited for establishing the trajectory of national development aimed at constructing a research-driven maritime industry by 2045. However, achieving these objectives necessitates substantial advancements in science and technology, as delineated in current national policies, rather than adhering to conventional, business-as-usual approaches. To further refine the roadmap for the national maritime research industry, strategic planning and technology road mapping become imperative to optimize progress towards technological confidence. [ABSTRACT FROM AUTHOR]

It is known that the studies of peatlands fire occurrences in Indonesia are less studied before. In our previous study, the prediction of the peatlands fire occurrence was modeled using various machine learning classification approaches. It is found that using South Kalimantan Province data, in the empirical study we previously found that the datasets are unbalanced, i.e., the occurrence and the nonoccurrence of fire hotspots areas. In the study presented in this paper, to improve the classification performance, we consider Adaptive Neighbor Synthetic Majority Oversampling Technique (ANS-SMOTE) approach to balance the data. Using the considered empirical data, we found that this method did not always gives improvement in the classification results. [ABSTRACT FROM AUTHOR]

In Indonesia, most coal mining systems are carried out using the open pit mining method. This method is considered cheaper and easier to apply in the field but has an impact on the creation of ex-coal mining pits (void). Recent regulation states that every mining company is obliged to carry out reclamation including environment management efforts for mining pits. However, not all mining business actors have complied with this effort, especially companies that do not have official permits. This ex-coal mining pit existence in the new capital city of Indonesia (IKN) delineation area become a crucial issue to be managed appropriately and wisely. The IKN Nusantara is the future capital city of Indonesia designed as a smart forest city, where 75% of the total area is maintained as a green space. This paper describes the management effort than can be carried out in ex-coal mining pit (void) within new capital city (IKN) Nusantara. All of the environmental management efforts for ex-coal mining pit (void) need to be aligned with detailed urban spatial plans in the future. There are several alternative efforts to utilize void that can be carried out, for example, as a source of clean water and raw materials, tourist destinations, sports areas, wildlife wetland habitats that are connected to the surrounding forest, landfills, agricultural reservoirs, and also water sources for forest fire mitigation. [ABSTRACT FROM AUTHOR]