Search

Achieving accurate measurements of G-quadruplexes (G4s), especially the characterization of their complicated non-covalent interactions with various components (such as metal ions and ligands) under physiological conditions, is of fundamental significance in unveiling their biological roles and developing antitumor drugs. By employing a nanopore ion emitter (∼30 nm), we demonstrated for the first time that G4 ions, which are free of non-specific adduction and meanwhile maintaining their pre-existing specific bindings with metal ions or ligands, can be directly liberated from common biochemical buffers (consisting of concentrated non-volatile salts of150 mM) for mass spectrometric examination. Notably, the intermediate complexes of G4s with mixed di-cation coordination formed during the Na

Methicillin-resistant

Myocardial miRNAs in peripheral blood are closely related to the pathogenic process of myocardial infarction. Rapid identification and accurate quantification of myocardial miRNAs are of great significance to clinical interventions for treating cardiovascular lesions. Therefore, a ratiometric electrochemiluminescence (ECL) biosensor integrating DNAzyme with a resonance energy transfer (RET) system was designed to detect myocardial miRNA. The dual-signal system was composed of rA marked substrate strand functionalized CdTe quantum dots (QDs) as reductive-oxidative (R-O) emitters and Cy5-labeled strand-functionalized Ru(bpy)

DNA methylation is catalyzed by a family of DNA methyltransferases that play crucial roles in various biological processes. Therefore, an ultrasensitive methyltransferase assay is highly desirable in biomedical research and clinical diagnosis. However, conventional assays for the detection of DNA methyltransferase activity often involve radioactive labeling, costly equipment, and laborious operation. In this study, an ultrasensitive and label-free method for detecting DNA adenine methyltransferase (Dam) and CpG methyltransferase (M.SssI) was developed using the nanopore technique coupled with DNA cascade signal amplification reactions. A hairpin DNA (H

Accurately obtaining information on the heterogeneity of CTCs at the single-cell level is a very challenging task that may facilitate cancer pathogenesis research and personalized therapy. However, commonly used multicellular population capture and release assays tend to lose effective information on heterogeneity and cannot accurately assess molecular-level studies and drug resistance assessment of CTCs in different stages of tumor metastasis. Herein, we designed a near-infrared (NIR) light-responsive microfluidic chip for biocompatible single-cell manipulation and study the heterogeneity of CTCs by a combination of the lateral flow microarray (LFM) chip and photothermal response system. First, immunomagnetic labeling and a gradient magnetic field were combined to distribute CTCs in different regions of the chip according to the content of surface markers. Subsequently, the LFM chip achieves high single-cell capture efficiency and purity (even as low as 5 CTCs per milliliter of blood) under the influence of lateral fluid and magnetic fields. Due to the rapid dissolution of the gelatin capture structure at 37 °C and the photothermal properties of gold nanorods, the captured single CTC cell can be recovered in large quantities at physiological temperature or released individually at a specific point by NIR. The multifunctional NIR-responsive LFM chip demonstrates excellent performance in capture and site release of CTCs with high viability, which provides a robust and versatile means for CTCs heterogeneity study at the single-cell level.

Lysosomal acidification is essential for its degradative function, and the flux of H+ correlated with that of K+ in lysosomes. However, there is little research on their correlation due to the lack of probes that can simultaneously image these two ions. To deeply understand the role of K+ in lysosomal acidification, here, we designed and fabricated a nanodevice using a K+-aptamer and two pH-triggered nanoswitches incorporated into a DNA triangular prism (DTP) as a dual signal response platform to simultaneously visualize K+ and pH in lysosomes by a fluorescence method. This strategy could conveniently integrate two signal recognition modules into one probe, so as to achieve the goal of sensitive detection of two kinds of signals in the same time and space, which is suitable for the detection of various signals with the correlation of concentration. By co-imaging both K+ and H+ in lysosomes, we found that the efflux of K+ was accompanied by a decrease of pH, which is of great value in understanding lysosomal acidification. Moreover, this strategy also has broad prospects as a versatile optical sensing platform for multiplexed analysis of other biomolecules in living cells.

Cytoplasmic microviscosity (CPMV) plays essential roles in governing the diffusion-mediated cellular processes and has been recognized as a reliable indicator of the cellular response of many diseases and malfunctions. Current CPMV studies are exclusively established by probe-assisted optical methods, which nevertheless necessitate the complicated synthesis and delivery of optical probes into cells and thus the issues of biocompatibility and bio-orthogonality. Using twin nanopipettes integrated with a patch-clamp system, a practical electrochemical single-cell measurement is presented, which is capable of real-time and long-term CPMV detection without cell disruption. Specifically, upon the operation of the twin nanopipettes, the cellular CPMV status, which is correlated to cytoplasmic ionic mobility, could be sensibly transduced via the ionic current passing through the nanosystem. The average CPMV value of HeLa cells was detected as ca. 86 cP. Notably, the correlation between chemotherapy and CPMV alterations makes this approach possible for the real-time and long-term assessment of the evolution of external stimuli, as exemplified by the two natural products taxol and colchicine. Integrated with the patch-clamp setup, this study features the first use of twin nanopipettes for electrochemical CPMV monitoring of single living cells, and it is expected to inspire more interest in the exploitation of dual- and multiple nanopipettes for advanced single-cell analysis.

This work developed a sensitive electrochemiluminescence (ECL) biosensor based on a cyclometalated iridium(III) complex ((bt)2Irbza), which was synthesized for the first time. Annihilation, reductive-oxidative, and oxidative-reductive ECL behaviors of (bt)2Irbza were investigated, respectively. The oxidative-reductive ECL intensity was the strongest compared with the other two, which showed 16.7 times relative ECL efficiency compared with commercial [Ru(bpy)3]2+ under the same experimental conditions. Therefore, an ECL biosensing system with (bt)2Irbza as the anodic luminophore was established for miRNA detection based on a closed bipolar electrode (BPE). Combined with both steric hindrance and catalytic effects induced by hemin/G-quadruplex in the cathodic reservoir of BPE that changed the Faraday current of the cathode and thus mediated the ECL intensity of (bt)2Irbza in the anode of BPE, the ECL sensor stated an ultrahigh sensitivity for microRNA (miRNA-122) analysis with a detection limit of 82 aM.

To date, plasmon resonance energy transfer (PRET)-based analytical approaches still inevitably suffer from limitations, such as lack of appropriate acceptor-donor pairs and the extra requirements of active groups of acceptors, which place great obstacles in extending the application of such methods, especially in the area of living cell studies. Herein, we design and fabricate a kind of "loading-type" plasmonic nanomaterials constituting gold nanoparticles as donors of PRET coated with mesoporous silicon, in which organic small molecules (CHCN) as acceptors of PRET were loaded (Au@MSN-CHCN). This "loading-type" strategy could conveniently integrate acceptor-donor pairs into one nanoparticle, so as to achieve the goal of sensitive detection of biomolecules in a complex physiological microenvironment. Based on the change of PRET efficiency of Au@MSN-CHCN induced by the specific reaction between CHCN and peroxynitrite (ONOO

Single particle plasmon scattering can provide real-time imaging information on the synthesis of nanomaterials. Here, an electrochemical deposition strategy is reported to synthesize plasmonic Au@Metal core-shell nanoparticles (Au@M NPs), which exhibit localized surface plasmon resonance (LSPR) properties. Because of the excellent catalytic activity of the methanol oxidation reaction (MOR), Pt, Pd, and Rh were reduced on the surface of Au NPs to form monometallic and bimetallic shells. Under dark field microscopy (DFM), the scattering changes could be utilized to track the surface nucleation and bulk deposition process. The synthesized Au@M NPs, which combined the plasmonic and electrocatalytic features, showed greatly enhanced activity for MOR. Under LSPR excitation, the electroxidation process toward MOR was accelerated and increased approximately linearly with increased illumination intensity, which could be mostly attributed to the generation of energetic charge carriers. This strategy of real-time plasmonic tracking electrochemical deposition at the single particle level is facile and universal, which could be extended to the precise synthesis of other plasmonic core-shell nanomaterials and the investigation of the pathway of plasmon accelerated chemical conversion.

A novel luminol electrochemiluminescence (ECL) sensing platform was developed based on the closed indium tin oxide bipolar electrode (ITO BPE) for detecting the biomarkers of squamous cell carcinomas named cytokeratin 19 fragments (CYFRA 21-1). A strategy of in situ-generated coreactant H2O2 and O2 was proposed to enhance luminol ECL intensity. CaO2, possessing a high capacity of self-supplying H2O2 and O2, was encapsulated by ZIF-67, glucose oxidase, and horseradish peroxidase (GOD/HRP-loaded ZIF-67@CaO2). In the presence of glucose, gluconic acid and H2O2 were generated via the catalytic effect of GOD; then, gluconic acid induced the degradation of ZIF-67, leading to the hydrolysis of the unprotected CaO2 to produce both O2 and H2O2. Therefore, the generated coreactants O2 and H2O2, via the oxidation of glucose and the hydrolysis of CaO2, can effectively enhance the luminol ECL behavior. According to the luminol ECL reaction occurring on the anode surface of the ITO BPE, a sandwich immunosensor was fabricated on the anodic ITO BPE and GOD/HRP-loaded ZIF-67@CaO2 as labels incubated with secondary antibodies. Owing to the cathodic reaction rate influencing the anodic reaction rate, Au nanoparticles were electrodeposited on the cathode surface of the ITO BPE, which not only meliorated oxygen reduction but also further enhanced the ECL intensity of luminol. Under optimal experiments, an ECL immunosensor for detecting CYFRA 21-1 with a wider linear range from 0.0075 to 50 ng mL-1 and a detection limit of 1.89 pg mL-1 (S/N = 3) was obtained.

Low-toxicity gold nanoclusters-decorated Ag@SiO2 (Au NCs-Ag@SiO2) nanocomposites modified plasmonic photoelectrodes were first fabricated to improve the photoelectric properties of Au NCs and practical application in biological detection. Through adjusting distance between Au NCs and plasmonic silver nanoparticles (Ag NPs), the photocurrent intensity of Au NCs enhanced by 3.8 times attributed to strong competition between enhancement functions of hot electron transfer, local electric field, light scattering effects, and quenching functions of nonradiative energy transfer. Further comparison between experimental results and theoretical simulations were conducted to gain a deeper understanding toward the photoelectric enhancement mechanism. Moreover, Au NCs-Ag@SiO2 nanocomposites was successfully applied to the construction of photoelectrochemical (PEC) biosensors for sensitively detecting alkaline phosphatase activity. This proposed PEC biosensor showed a wide linear range from 0.04 to 400 U·L-1, and a low detection limit of 0.022 U·L-1.

Nanochannel-based analytical techniques have great potential applications for nucleic acid sequencing and high sensitivity detection of biological molecules. However, the sensitivity of conventional solid-state nanochannel sensors is hampered by a lack of effective signal amplification strategies, which has limited its utility in the field of analytical chemistry. Here we selected a solid-state nanochannnel modified with polyethylenimine and Zr4+ in combination with graphene oxide as the sensing platform. The high-performance sensor is based upon the change of the surface charge of the nanochannel, which is resulted from DNA cascade signal amplification in solution. The target miRNA (miR-122) can be indirectly quantitated with a detection limit of 97.2 aM with an excellent selectivity. Depending on the nucleic acid's hybridization and configuration transform, the designed nanochannel sensing systems can realize the intelligent detection of multiple liver cancer-related miRNA (miR-122 and miR Let-7a) integrating with cascaded INHIBIT-OR logic gate to provide theoretical guidance and technical support for clinical diagnosis and therapeutic evaluation of liver cancer.

Owing to the characteristics of high throughput, high flexibility, and convenient separation of the sensing and reporting reactions, the bipolar electrode (BPE) shows great potential in clinical analysis. However, there are some difficulties in the combination of BPEs and multiplex electrochemiluminescence (ECL) biosensing, such as the need for small sample consumption, multistep operations, and separated sample loading. In this paper, a microfluidic BPE array chip was fabricated toward multiplex detection of cancer biomarkers. With a special channel structure and the difference in flow resistance of channels of different sizes, the direction of liquid flow was successfully controlled. In this way, rapid and automatic multiplex sampling was achieved on the array, which would help improve the sensing efficiency and reduce the reagent consumption. The ECL BPE array chip served as an immunosensor for multiple prostate cancer biomarkers including prostate-specific antigen (PSA), interleukin-6 (IL-6), and prostate-specific membrane antigen (PSMA). The microfluidic BPE chip shows good reproducibility and high sensitivity. The limits of detection for PSA, IL-6, and PSMA are 0.093 ng/mL, 0.061 pg/mL, and 0.059 ng/mL, respectively. It also exhibits excellent performance in real sample analysis. The integrated ECL BPE array shows a good application prospect in clinical sensing of cancer biomarkers, as well as point-of-care testing.

Lysosomal acidification is essential for its degradative function, and the flux of H

MicroRNAs (miRNAs) play key roles in many serious diseases, such as cancer. As a consequence, miRNAs are of great interest as biomarkers in clinical diagnostics. Simple, fast, selective, and sensitive detection of miRNAs, however, is challenged by their short length, homogeneous sequence, susceptibility to degradation, and low abundance in human serum. Here, we present a new strategy for highly sensitive and selective detection of miRNA based on the formation of a plasmonic Au@Ag nanosnowman. When triggered by miRNA-21, bimetallic nanoparticles with an asymmetric Au@Ag head-body structure were formed with significant red shift of the localized surface plasmon resonance (LSPR) scattering wavelength and clear color change from green to red. When combined with exonuclease III (Exo III)-assisted target recycling and hybridization chain reaction (HCR) amplification strategy, the proposed bioassay showed excellent selectivity toward miRNA-21 with a proportional band from 1 fM to 100 pM and ultrahigh sensitivity with a limit of detection of 0.60 fM under dark-field microscopy. The proposed strategy is universal, which shows good application prospects in clinical analysis.

This paper develops an efficient electrochemiluminescence (ECL) enhancement strategy on closed bipolar electrode for the detection of prostate specific antigen (PSA). We first synthesized a cyclometalated iridium(III) complex (pq)2Irbza with high ECL efficiency and used as ECL emitter in the anodic cell of BPE. While we introduced a Pt-tipped Au NRs and constructed a sandwich immune structure at the cathodic pole of BPE. Combined the signal amplification strategies of enzyme catalysis and the synergistic catalytic effect of bimetallic structure for the reduction of H2O2, the attached Pt-tipped Au NRs-GOx-Ab2 nanocomplex as both recognition probes and signal amplification units could mediate the ECL signals of (pq)2Irbza/tripropylamine (TPrA) on the anodes of BPE through faradaic reaction due to the charge neutrality of BPE. Therefore, a highly sensitive BPE-ECL sensor for detection of PSA with a detection limit of 0.72 pg/mL and a linear range from 1.0 pg/mL to 10 ng/mL was obtained. This work is expected to broaden the application of iridium complex and bimetallic nanocatalyst in biological detection and could be utilized to detect many other biological molecules.

This paper describes a bidirectional electrochemiluminescence (ECL) biosensor for the detection of microRNA-141 (miRNA-141) with aM level detection limit and two-segment 8 orders of magnitude linear range. Hemin/G-quadruplex DNAzyme was assembled on carbon nitride nanosheets and Au nanoparticles modified electrode. The ECL of carbon nitride nanosheets could be enhanced by the right amount of H2O2 (no more than 10 mM) and then inhibited by excessive H2O2 when 0.1 M K2S2O8 acted as coreactant. In the presence of excessive H2O2 (20 mM), a recovery of ECL intensity was obtained due to the catalytic reduction of H2O2 caused by hemin/G-quadruplex DNAzyme at lower target concentrations, and then an ECL decrease occurred mainly by biocatalytic precipitation (BCP)-induced charge transfer resistance on the electrode surface at higher target concentrations. Therefore, based on the change of the ECL intensity caused by the catalytic reduction of H2O2 and BCP, a highly sensitive bidirectional miRNA sensor with ultralow detection limit of 7.9 aM and wide linear range from 10-17 to 10-9 M was obtained. This work could attract more attention on the study of multiple mechanisms and also provides a more sensitive and precise method for the analysis of nucleic acids.

Lysosomes are acidic organelles that not only participate in intracellular degradation but also relate to various cellular functions. Abnormal pH in lysosomes would lead to lysosomal dysfunction, which may further result in many diseases. In this work, we statistically analyze the pH change in the lysosomes of HeLa cells model by using surface enhanced Raman scattering (SERS) imaging technique. We prepared a plasmon Raman pH probe and localized the pH probe to lysosomes via an incubation-depletion method. The pH profiles within lysosomes during the process of cellular autophagy and apoptosis were monitored in situ by SERS imaging. The pH in lysosomes decreased slightly during the process of autophagy, while the pH in lysosomes increased during apoptosis. The phenomenon, in general, is consistent with our current biological knowledge. However, we did not observe significant variation of pH between different individual cells. This information might provide an in depth understanding about the relationship of lysosomal pH with fundamental cellular functions and mechanism of diseases.

The structural characterization of proteins and their interaction network mapping in the gas phase highlights the need to preserve their most nativelike conformers in the transition from the solution to gas phase. Zwitterionic interactions in a protein are weak bonds between oppositely charged residues, which make an important contribution to protein stability. However, it is still not clear whether the native zwitterionic states of proteins can be retained or not when it is transferred from the solution to gas phase. Using the nonspecific Na+ adduction as a novel signature, here we show that the zwitterionic states of proteins can be preserved when a moderated droplet desolvation condition (temperature

Owing to the low abundance of microRNAs (miRNAs) in living tumor cells, the development of intracellular cancer-relevant miRNA stimuli-activatable photosensitizers (PSs) for accurate imaging and efficient photodynamic therapy (PDT) of tumors in vivo is extremely challenging. Herein, we engineered a tumor targeting and intracellular trace miRNA-activatable nanophotosensitizer Y-motif/FA@HyNP on the basis of an endogenous ATP-powered strand-displacement cascade amplification strategy, which was prepared by assembly of a quencher BHQ2-labeled Y-motif DNA structure (containing ATP-binding aptamer and target miRNA-binding complementary sequence) on the surface of folate (FA) and amine-functionalized hybrid micellar nanoparticles. We showed that the fluorescence emissions at both 555 and 627 nm were effectively inhibited due to BHQ2 in Y-motif/FA@HyNPs, leading to negligible PDT efficacy. Once Y-motif/FA@HyNPs were selectively internalized into tumor cells via FA-receptor-mediated endocytosis, the intracellular trace target miRNA initiated the dissociation of the BHQ2-terminated sequences from Y-motif/FA@HyNPs by means of abundant endogenous ATP-powered strand-displacement reactions, causing remarkable fluorescence enhancement and cascade amplification PDT. The activated dual-color fluorescence emissions at 555 and 627 nm were feasible to achieve real-time, highly sensitive, and specific imaging of trace target miRNA in living tumor cells. With the guidance of excellent imaging in living mice, Y-motif/FA@HyNPs exhibited the precise and efficient PDT of tumors as well as insignificant side effects in vivo. This work revealed the great potential of using an integration of receptor-mediated cell uptake and target-triggered recycling cascade amplification strategy to design early cancer-relevant stimuli-activatable PSs for both fluorescence imaging and PDT ablation of tumors in vivo, which could effectively facilitate the timeliness and precision of early cancer diagnosis and therapy.

This Letter reports a novel synthetic methodology for the fabrication of three-dimensional (3D) nanostructured CdS@carbon fiber (CF) networks and the validation of its feasibility for applications as a general platform for photoelectrochemical (PEC) bioanalysis. Specifically, 3D architectures are currently attracting increasing attention in various fields due to their intriguing properties, while CdS has been most widely utilized for PEC bioanalysis applications because of its narrow band gap, proper conduction band, and stable photocurrent generation. Using CdS as a representative material, this work realized the innovative synthesis of 3D CdS@CF networks via a simple solvothermal process. Exemplified by the sandwich immunoassay of fatty-acid-binding protein (FABP), the as-fabricated 3D CdS@CF networks exhibited superior properties, and the assay demonstrated good performance in terms of sensitivity and selectivity. This work features a novel fabrication of 3D CdS@CF networks that can serve as a general platform for PEC bioanalysis. The methodology reported here is expected to inspire new interest for the fabrication of other 3D nanostructured Cd-chalcogenide (S, Se, Te)@CF networks for wide applications in biomolecular detection and beyond.

In clinical diagnosis, the level of biological enzymes in serum has been generally regarded as markers of human diseases. In this work, a kind of simple and sensitive plasmonic probe (indicated as Au@FeOOH) has been synthesized with the guidance of plasmonic imaging and subsequently developed for the alkaline phosphatase (ALP) level detection under dark-field microscopy (DFM). As a kind of hydrolysis enzyme, ALP can promote the hydrolysis of l-ascorbic acid 2-phosphate to ascorbic acid (AA). AA further acts as a strong reduction reagent for the decomposition of the FeOOH shell, which results in a blue shift of localized surface plasmon resonance spectra and an obvious color change under DFM. RGB analyses show that using a ΔR/G value instead of scattering wavelength or R/G value as the analytical signal, the deviation attributed to the size distribution of the initial Au NPs is greatly suppressed, and a linear range from 0.2 to 6.0 U/L (R2 = 0.99) and a limit of detection of 0.06 U/L are acquired with various concentrations of ALP during the detection. Besides, this approach exhibits excellent selectivity in complex biological serum samples, which is expected to be applied for the early diagnosis of clinical diseases by monitoring various biomarkers in the future.

A simple process, rich information, and intelligent response are the goals pursued by cancer diagnosis and treatment. Herein, we developed a core-shell plasmonic nanomaterial (Au@MnO2-DNA), which consisted of a AuNP core with an outer shell MnO2 nanosheet decorated with fluorophore modified DNA, to achieve the aforementioned aims. On the basis of the unique optical properties of plasmonic nanoparticles and the oxidability of the shell MnO2, scattering signal and fluorescence (FL) signal changes were both related to the expression level of glutathione (GSH), for which a dual-mode imaging analysis was successfully achieved on single optical microscope equipment with one-key switching. Meanwhile, the product of Mn2+ from the reaction between MnO2 and GSH not only served as a smart chemodynamic agent to initiate Fenton-like reaction for achieving chemodynamic therapy (CDT) of cancer cells but also relieved the side effect of intracellular GSH in cancer therapy. Therefore, the core-shell plasmonic nanomaterials with dual modal switching features and diagnostic properties act as excellent probes for achieving bioanalysis of aberrant levels of intracellular GSH and simultaneously activating the CDT of cancer cells based on the in situ reactions in cancer cells.

Aggregation-induced emission (AIE) active Pdots are attractive nanomaterials applied in electrochemiluminescence (ECL) fields, while the irreversible redox reaction of these Pdots is a prevailing problem, resulting in instability of ECL emission. Herein, we first designed and synthesized an AIE-active Pdot with reversible redox property, which contains a tetraphenylethene derivate and benzothiadiazole (BT) to achieve stable ECL emission. BT has a good rigid structure with excellent electrochemical behaviors, which is beneficial for avoiding the destruction of the conjugated structure as much as possible during the preparation of Pdots, thus maintaining good redox property. The tetraphenylethene derivate, as a typical AIE-active moiety, provides a channel for highly efficient luminescence in the aggregated states. The Pdots exhibited reversible and quasi-reversible electrochemical behaviors during cathodic and anodic scanning, respectively. The stable annihilation, reductive-oxidative, and oxidative-reductive ECL signals were observed. Subsequently, we constructed an ultrasensitive ECL biosensor based on the oxidative-reductive ECL mode for the detection of miRNA-21 with a detection limit of 32 aM. This work provides some inspiration for the future design of ECL materials featuring AIE-active property and stable ECL emission.

MicroRNA (miRNA) has emerged as one of the ideal target biomarker analytes for cancer detection because its abnormal expression is closely related to the occurrence of many cancers. In this work, we combined three-dimensional (3D) popcorn-like gold nanofilms as novel surface-enhanced Raman scattering (SERS)-electrochemistry active substrates with toehold-mediated strand displacement reactions (TSDRs) to construct a DNA molecular machine for SERS-electrochemistry dual-mode detection of miRNA. 3D popcorn-like spatial structures generated more active "hot spots" and thus enhanced the sensitivity of SERS and electrochemical signals. Besides, the TSDRs showed high sequence-dependence and high specificity. The addition of target miRNA will trigger the molecular machine to perform two TSDRs in the presence of signal DNA strands modified by R6G (R6G-DNA), thus achieving an enzyme-free amplification detection of miRNA with a low limit of detection of 0.12 fM (for the SERS method) and 2.2 fM (for the electrochemical method). This biosensor can also serve as a universally amplified and sensitive detection platform for monitoring different biomarkers, such as cancer-related DNA, messenger RNA, or miRNA molecules, with high selectivity by changing the corresponding probe sequence.

As one of the most promising biomarkers for numerous malignant tumors, accurate and reliable reporting of Cathepsin B (CTSB) activity is of great significance to achieve efficient diagnosis of cancers at an early stage and predicting metastasis. Here, we report a vigorous ratiometric fluorescent method integrating a cancer-targeting recognition moiety with a remarkably large emission wavelength shift into a single matrix to report CTSB activity sensitively and specifically. As a proof of concept, we synthesized amine-rich carbon quantum dots (CQDs) with a blue fluorescence, which offered an efficient scaffolding to covalently assemble the nucleolin-targeting recognition nucleic acid aptamer AS1411 and a CTSB-cleavable peptide substrate Gly-Arg-Arg-Gly-Lys-Gly-Gly-Cys-COOH that tethered with a near-infrared (NIR) fluorophore chlorin e6 (Ce6-GRRGKGGC, Ce6-Pep), enabling a cancer-targeting and CTSB stimulus-responsive ratiometric nanoprobe AS1411-Ce6-CQDs. Owing to the efficient fluorescence resonance energy transfer (FRET) process from the CQDs to Ce6 inside the assembly of nanoprobe, the blue fluorescence of CQDs at ∼450 nm was remarkably quenched, along with an obvious NIR fluorescence enhancement of Ce6 at ∼650 nm. After selective entry into cancer cells via nucleolin-mediated endocytosis, the overexpressed CTSB in lysosome could cleave Ce6-Pep and trigger the Ce6 moiety dissociation from AS1411-Ce6-CQDs, thus leading to the termination of FRET process, achieving the efficient ratiometric fluorescence response toward endogenous CTSB with a remarkably large emission wavelength shift of ∼200 nm from NIR to blue emission region. Notably, the nanoprobe AS1411-Ce6-CQDs exhibited an excellent specificity for ratiometric fluorescent sensing of CTSB activity with an ultralow detection limit of 0.096 ng/mL, demonstrating its promising use for early precise cancer diagnosis in the near future.

Engineered nanopipette tools have recently emerged as a powerful approach for electrochemical nanosensing, which has major implications in both fundamental biological research and biomedical applications. Herein, we describe a generic method of target-triggered assembly of aptamers in a nanopipette for nanosensing, which is exemplified by sensitive and rapid electrochemical single-cell analysis of adenosine triphosphate (ATP), a ubiquitous energy source in life and important signaling molecules in many physiological processes. Specifically, a layer of thiolated aptamers is immobilized onto a Au-coated interior wall of a nanopipette tip. With backfilled pairing aptamers, the engineered nanopipette is then used for probing intracellular ATP via the ATP-dependent linkage of the split aptamers. Due to the higher surface charge density from the aptamer assembly, the nanosensor would exhibit an enhanced rectification signal. Besides, this ATP-responsive nanopipette tool possesses excellent selectivity and stability as well as high recyclability. This work provides a practical single-cell nanosensor capable of intracellular ATP analysis. More generally, integrated with other split recognition elements, the proposed mechanism could serve as a viable basis for addressing many other important biological species.

Collective cell migration plays a key role in tissue repair, metastasis, and development. Cellular tension is a vital mechanical regulator during the force-driven cell movements. However, the contribution and mechanism of cell-cell force interaction and energetic costs during cell migration are yet to be understood. Here, we attempted to unfold the mechanism of collective cell movement through quantification of the intercellular tension and energetic costs. The measurement of pN intercellular force is based on a "spring-like" DNA-probe and a molecular tension fluorescence microscopy. During the process of wound healing, the intercellular force along with the cell monolayer mainly originates from actin polymerization, which is strongly related to the cellular energy metabolism level. Intracellular force at different spatial regions of wound and the energetic costs of leader and follower cells were measured. The maximum force and energy consumption are mainly concentrated at the wound edge and dynamically changed along with different stages of wound healing. These results indicated the domination of leader cells other than follower cells during the collective cell migration.

Nanoelectrode arrays have been widely used in electroanalytical applications. The challenge is to develop low-cost and simple approaches to the fabrication of superuniform and ultrasmall nanoelectrode arrays for improving analytical performance and imaging resolution. Here, superuniform and high-density gold nanoelectrode arrays with tunable electrode diameters and interelectrode distances have been fabricated by electrodeposition, followed by a simple mechanical polishing process. The fabricated free-standing arrays have a high density (108 cm-2) of nanoelectrodes (60, 140, and 200 nm in diameter), and can be used as closed bipolar electrode arrays to image electrochemical heterogeneity with micrometer spatial resolution. With the help of a confocal microscope, individual nanoelectrodes can be visualized and resolved from the reflected light. Thus, the nanoelectrode arrays are promising in electrochemical imaging with high spatial resolution.

A novel luminol electrochemiluminescence (ECL) sensing platform was developed based on the closed indium tin oxide bipolar electrode (ITO BPE) for detecting the biomarkers of squamous cell carcinomas named cytokeratin 19 fragments (CYFRA 21-1). A strategy of

Despite great achievements in sensitive and selective detection of important biomolecules in living cells, it is still challenging to develop smart and controllable sensing nanodevices for cellular studies that can be activated at desired time in target sites. To address this issue, we have constructed a remote-controlled "lock-unlock" nanosystem for visual analysis of endogenous potassium ions (K+), which employed a dual-stranded aptamer precursor (DSAP) as recognition molecules, SiO2 based gold nanoshells (AuNS) as nanocarriers, and near-infrared ray (NIR) as the remotely applied stimulus. With the well-designed and activatable DSAP-AuNS, the deficiencies of traditional aptamer-based sensors have been successfully overcome, and the undesired response during transport has been avoided, especially in complex physiological microenvironments. While triggered by NIR, the increased local temperature of AuNS induced the dehybridiztion of DSAP, realized the "lock-unlock" switch of the DSAP-AuNS nanosystem, activated the binding capability of aptamer, and then monitored intracellular K+ via the change of fluorescence signal. This DSAP-AuNS nanosystem not only allows us to visualize endogenous ions in living cells at a desired time but also paves the way for fabricating temporal controllable nanodevices for cellular studies.

This paper describes an electrochemiluminescence resonance energy transfer (ECL-RET) system using Ru(bpy)32+-doped silica nanoparticles (RuSi NPs) as the ECL donor and hollow Au nanocages as the ECL acceptor. Tetrahedron DNA (TD) was used to construct the biosensing interface and control the distance (4.8 nm) between the ECL donor–acceptor pairs. The surface plasmon resonance (SPR) nanostructures, Au nanocages were assembled via the hairpin based sandwich assay. Due to the well overlap between the plasmon absorption spectrum of Au nanocages (628 nm) and the ECL emission spectrum of RuSi NPs (620 nm), high efficient energy transfer could occur. Subsequent cyclic DNA amplification further increased the binding amount of Au nanocages. Since the ECL inhibition is closely related with the binding amount of Au nanocages, a general “signal-off” ECL bioassay could thus be tailored with high sensitivity. At the optimized conditions, this ECL-RET system performed well with great stability and repeatability for nucl...

This work reports the synthesis, characterization, and application of bifunctional semiconducting CuO nanotubes (NTs) electrode for innovative synergized cathodic photoelectrochemical (PEC) enzymatic bioanalysis. Specifically, CuO NTs electrode was fabricated by surface oxidation of the copper foil in an alkaline aqueous solution with (NH4)2S2O8 and then annealed in air at 200 °C. After the subsequent coupling with the model enzyme of xanthine oxidase (XOD), the resulted photocathodic enzyme biosensor exhibited good analytical performance of rapid response, high stability, and good sensitivity. Especially, due to the unique catalytic property of CuO toward H2O2, a novel enzymatic cascade design between biological catalyst (XOD as natural enzyme) and biomimetic catalyst (CuO as the peroxidase mimetics) was constructed, and the dual-catalyst system with special synergy effect could achieve the cathodic PEC guanine bioanalysis with enhanced efficiency. In the determination, the cathodic photocurrent was foun...

The small absorption cross sections of most molecules led to the low sensitivity of traditional optical absorption spectroscopy. This obstacle might be overcome by applying the near-field plasmon resonance energy transfer (PRET) between plasmonic nanoparticle and surrounding molecules. In this work, we utilized PRET-based spectroscopy on single gold nanostars to study the specific biomolecule recognition and enzyme kinetics choosing biotin-SA pair and DNase I as models. By analyzing the changes of absorption spectra for black hole quencher 3 (BHQ3), derived from spectra difference, we explored the kinetics of specific biomolecule recognition and enzyme digestion in different physiological environment, and we found that the viscosities of media and the sizes of molecules play vital role in biomolecular recognition and enzyme digestion. Compared with the traditional optical absorption spectroscopy techniques, PRET-based spectroscopy offers a nanoscopic resolution owing to the small size of the probe, is more sensitive and achieves detection on the order of hundreds or even dozens of molecules, and can achieve high selectivity due to the specific biomolecular recognition. This method might be used in the fields of molecular diagnostics, drug discovery, cell systems, and clinical diagnostics.

Gold nanodendrites (Au NDs) exhibit extremely strong electromagnetic field located around multiple tip branches due to a plasmon coupling effect. In this work, a novel LSPR-enhanced ECL emission from CdTe nanocrystals (NCs) by Au NDs for the detection of nucleic acid is reported. This system is composed of a thin film of CdTe NCs on glassy carbon electrode (GCE) as anodic ECL emitter and Au NDs as plasmon enhancer. DNA tetrahedron embedded with a stem-loop hairpin structure on one edge was applied as a switch to regulate the distance between CdTe NCs and Au NDs. At original state, the hairpin structure was closed and DNA tetrahedron played in a relaxed state on CdTe NCs film. The ECL emission of CdTe NCs was quenched by proximal Au NDs due to Förster resonance energy transfer (FRET), which was defined as the "turn-off" mode. After the complementary hybridization with target DNA, the hairpin structure changed to a rodlike configuration, resulting in an increased distance between CdTe NCs and Au NDs, and a significant enhancement of ECL induced by LSPR of Au NDs, which was defined as a "turn-on" mode. Along with the asymmetric modification method, a controllable and versatile pathway for modifying nanomaterials, the ECL sensor performed well with great stability and repeatability for nucleic acid detection in the range from 1.0 to 500 fM. Considering the high sensitivity and selectivity in the serum sample assay, this proposed method indicates a great potential for bioassay application.

Metal-organic frameworks (MOFs) have been successfully used as efficient quenchers for fluorescent DNA detection. However, the surface charge property of MOFs can inevitably affect their fluorescence quenching behavior. Herein, nanoscale MOFs (NMOFs), including MOF nanosheets and nanoparticles, have been employed to investigate the relationship between the fluorescence quenching and surface properties of NMOFs. We find that the positively and negatively charged NMOFs exhibited totally opposite fluorescence quenching properties toward negatively charged FAM-labeled double-stranded DNA (dsDNA). On the contrast, they show negligible influence on the sensing of positively charged TAMRA-labeled dsDNA. This study provides a new insight of the fluorescence quenching property of NMOFs and offers a new concept for construction of ratiometric fluorescence DNA biosensors.

It is a great challenge to design a drug delivery system with a controlled manner, especially one triggered by an exclusive endogenous disease marker and with an easily tracked release process. Herein, we developed a drug delivery platform of carbon dots which were connected to a stem-loop molecular beacon loaded with doxorubicin and polyethylene glycol modified folic acid. Such a platform enables one to release drugs on demand under the stimuli of endogenous microRNA-21, and turn on the fluorescence of carbon dots and doxorubicin, which allows one to monitor the drug release process. The intracellular experiment indicated that folic acid could mediate endocytosis of the nanocarrier, and the overexpressed endogenous microRNA-21 served as a unique key to unlock the drug nanocarrier by competitive hybridization with the molecular beacon, which finally resulted in fluorescence recovery and realized a chemotherapeutic effect within human breast cancer cells. The nanocarrier may have potential application in personalized treatment of different cancer subtypes in which the corresponding miRNAs are overexpressed.

We have developed sensitive photoelectrochemical (PEC) detection of cysteine using the gold nanoparticles (Au NPs) equipped perovskite Bi4NbO8Cl heterostructure. The Bi4NbO8Cl was prepared by a solid-state reaction, and the Au NPs/Bi4NbO8Cl electrode was made through the electrostatic layer-by-layer self-assembly technique. The Au NPs/Bi4NbO8Cl electrode provided much enhanced photocurrent with a great increase compared to the bare Bi4NbO8Cl electrode and allowed for the plasmon-enhanced PEC detection of cysteine with good performance. It demonstrated rapid response, high stability, wide linear detection range and certain selectivity, implying its great promise in its application. Therefore, the Au NPs/Bi4NbO8Cl heterostructure has provided a promising platform for the development of PEC bioanalysis. More generally, these findings offered an insight into the exploitation of perovskite materials for PEC bioanalytical purposes.

Different from the most extensively used inorganic quantum dots (Qdots) for the current state-of-the-art photoelectrochemical (PEC) bioanalysis, this work reports the first demonstration of polymer dots (Pdots) for novel PEC bioanalysis. The semiconducting Pdots were prepared via the reprecipitation method and then immobilized onto the transparent indium tin oxide glass electrode for PEC biodetection of the model molecule l-cysteine. The experimental results revealed that the as-fabricated Pdots exhibited excellent and interesting PEC activity and good analytical performance of rapid response, high stability, wide linear range, and excellent selectivity. In particular, the PEC sensor could easily discriminate l-cysteine from reduced l-glutathione (l-GSH). This work manifested the great promise of Pdots in the field of PEC bioanalysis, and it is believed that our work could inspire the development of numerous functional Pdots with unique properties for innovative PEC bioanalytical purposes in the future.

It is challenging to develop a robust nanoprobe for real-time operational and accurate detection of heavy metals in single cells. Fe-CN coordination chemistry has been well studied to determine the structural characteristics of hemeproteins by different techniques. However, the frequently used cyanide ligands are inorganic molecules that release cyanide anion under particular conditions and cause cyanide poisoning. In the present study, organic cyanide (4-mercaptobenzonitrile, MBN) was utilized for the first time in developing a facile nanoprobe based on surface-enhanced Raman scattering (SERS) for quantitative detection of hemeproteins (oxy-Hb) and trivalent iron (Fe3+) ions. The nanoprobe prepared by coating the glass capillary tip (100 nm) with a thin gold film, which enables highly localized study in living cell system. The cyanide stretching vibration in MBN was highly sensitive and selective to Fe3+ and oxy-Hb with excellent binding affinity (Kd 0.4 pM and 0.1 nM, respectively). The high sensitivity...

Microfluidic paper analytical devices (μPADs) are smart and accessible substituents to traditional counterparts in point-of-care tests (POCT), which exploited delicate control over passive fluid in microscale for rich functions. In this work, we are extending such control by introducing novel ways to generate 1D and 2D gradients on μPADs. It is achieved by using paper-capillary-based serial sampling. The paper capillary is composed of a concaved paper channel sealed with tape, with test pads properly distributed aside. In such a structure, the liquid can not only quickly and automatically flow along the capillary but also be continuously consumed by the peripheral test pads. Thus, when we do serial sampling, an abnormal liquid chasing effect can be observed, where the later liquid sample chases and surpasses the earlier parts in the paper capillary, leading to reversely ordered sample distribution compared with that in a typical glass capillary. This specialty allows for fast, ordered, and tunable sequential sampling and enables efficient generation of 1D and 2D concentration gradient with one, two, and even three components on μPADs. Besides, we verified the applicability of this technique for arrayed assays, including 1D serial dilution-based metal ion colorimetry and a 2D bacterial antibiotic susceptibility test for synergic effect evaluations, which paves the way for high-throughput sample analysis and information-rich condition screening on μPADs.

Here, we proposed a novel local surface plasmon resonance (LSPR) enhanced ECL strategy based on the metallic inverse opals and Ru(bpy)32+-doped silica nanoparticles (RuSi NPs). Gold inverse opals (GIOs), as a plasmonic array, could interact with the ECL of RuSi NPs and excite the electromagnetic (EM) field at the gold surface. The triggered EM field could enhance the ECL emission of RuSi NPs. We compared the electrochemical and ECL performances of RuSi NPs modified on the gold electrodes with different surface morphologies and found that the ECL emission of RuSi NPs patterned at the inner surface of GIOs exhibited the highest intensity. The finite-difference time-domain (FDTD) simulations indicated that the EM field was related to the surface morphology of the metallic nanostructure, and the highest EM field was observed at the inner surface of the GIOs. Because of the superior ECL performances, the inner surfaces of GIOs were developed for nucleic acid detection with a detection limit of 3.3 fM (S/N = 3), which shows great promise for bioanalysis.

In the work, we showed that the use of nanoemitters (tip dimension1 μm, typically ∼100 nm) could dramatically reduce the nonspecific metal adduction to peptide or protein ions as well as improve the matrix tolerance of electrospray ionization mass spectrometry (ESI-MS). The proton-enriched smaller initial droplets are supposed to have played a significant role in suppressing the formation of metal adduct ions in nanoemitters. The proton-enrichment effect in the nanoemitters is related to both the exclusion-enrichment effect (EEE) and the ion concentration polarization effect (ICP effect), which permit the molecular ions to be regulated to protonated ones. Smaller initial charged droplets generated from nanoemitters need less fission steps to release the gas-phase ions; thus, the enrichment effect of salt was not as significant as that of microemitters (tip dimension1 μm), resulting in the disappearing of salt cluster peaks in high mass-to-charge (m/z) region. The use of nanoemitters demonstrates a novel method for tuning the distribution of the metal-adducted ions to be in a controlled manner. This method is also characterized by ease of use and high efficiency in eliminating the formation of adduct ions, and no pretreatment such as desalting is needed even in the presence of salt at millimole concentration.

Though microfluidic paper analytical devices (μPADs) have attracted paramounting attentions in recent years as promising devices for low cost point-of-care tests, their real applications for blood analysis are still challenged by integrating sample preparation with different detection modes on a same μPAD. Herein, we developed a novel μPAD, which well coupled automatic serum extraction with reliable dual mode iron health tests: fluorescent analysis for Fe3+ and colorimetric ELISA for ferritin. All these functions are made available by in situ carbon dots (CDs) and AuNPs sequential patterning techniques. For CDs immobilization, hydrothermal reaction was taken on paper, to which a patterned through-hole polydimethylsiloxane (PDMS) mask was applied. None fluorescence CDs (nF-CDs) were generated on exposed regions, while the fluorescent CDs (F-CDs) were generated simultaneously on covered regions. Sensitive serum iron quantification was realized on the F-CDs modified regions, where Fe3+ ion can selectively qu...

In this Letter, on the basis of the CdS quantum dots functionalized TiO2 nanotubes electrode, we proposed a simultaneous photoelectrochemical (PEC) immunoassay of dual cardiac markers using specific enzyme tags of alkaline phosphatase (ALP) and acetylcholine esterase (AChE). ALP and AChE were integrated into the PEC system through the sandwich immunobinding and could specifically catalyze the hydrolysis of ascorbic acid 2-phosphate (AAP) or the acetylthiocholine (ATC) to in situ generate ascorbic acid (AA) or thiocholine (TC) for sacrificial electron donating. These two enzymes were thus used to differentiate the signals of two cardiac targets in connection with the sandwich immunorecognition and PEC responses to the corresponding electron donors. This strategy demonstrates a proof of principle for the successful integration of dual enzyme tags with PEC immunoassay that can potentially provide a general format for multiplexed PEC bioanalysis.

Innovative techniques to measure microRNA (miRNA) in vivo could greatly improve the fundamental understanding of complex cellular processes. Herein, we report a novel method for real-time, quantitative miRNA detection inside living cells based on core-satellite plasmon rulers (PRs). This approach allows for the statistical analysis of single hybridization event caused by target miRNA. We investigated hundreds of satellite leaving events and found that the distribution of the time range for one strand displacement event is miRNA concentration-dependent, which obeyed Poisson statistics. Probing several such PRs under dark-field microscopy would provide precise determination of miRNA in vitro and in living cells, without photobleaching or blinking of the fluorophores. We believe the simple and practical approach on the basis of dynamic PRs with single-molecule sensitivity combined with statistical analysis hold promising potential to visualize native nucleic acids with short sequence and low-abundance.

In this study, we proposed a dual-wavelength electrochemiluminescence resonance energy transfer (ECL-RET) ratiometric sensor combined with duplex-specific nuclease (DSN)-assisted target recycling amplification to detect microRNAs (miRNAs). Due to the perfect overlapping of spectra, the gold-nanoparticle-luminol-layered-double-hydroxides (Au NP-luminol-LDH) nanocomposite and gold nanoclusters (Au NCs) exhibited excellent ECL-RET effect with high efficiency. The Au NP-luminol-LDH donor exhibits a strong and stable ECL emission at the wavelength peak of 440 nm, while the Au NC acceptor has an emission peak at 620 nm. Upon the introduction of DSN and target miRNAs, the specific DNA-RNA binding and nuclease cleaving could trigger the detachment of capture Au NCs-DNA from the surface of Au NP-luminol-LDH, resulting in an increased ECL signal of Au NP-luminol-LDH and a decreased fluorescence signal of Au NCs. By measuring the ratio of optical signals at 440 and 620 nm, the designed sensor provided a quantitative readout proportional to the target miRNAs concentration in the range of 10 aM to 100 pM with a lower detection limit (LOD) of 9.4 aM.