Search

Microbial-induced CaCO3 precipitation has been widely applied in bacterial-based self-healing concrete. However, the limited biogenetic CaCO3 production by bacteria after they were introduced into the incompatible concrete matrix is a major challenge of this technology. In the present study, the potential of combining two metabolic pathways, urea hydrolysis and nitrate reduction, simultaneously in one bacteria strain for improving the bacterial CaCO3 yield has been investigated. One bacterial strain, Ralstonia eutropha H16, which has the highest Ca2+ tolerance and is capable of performing both urea hydrolysis and nitrate reduction in combined media was selected among three bacterial candidates based on the enzymatic examinations. Results showed that H16 does not need oxygen for urea hydrolysis and urease activity was determined primarily by cell concentration. However, the additional urea in the combined medium slowed down the nitrate reduction rate to 7 days until full NO3− decomposition. Moreover, the nitrate reduction of H16 was significantly restricted by an increased Ca2+ ion concentration in the media. Nevertheless, the overall CaCO3 precipitation yield can be improved by 20 to 30% after optimization through the combination of two metabolic pathways. The highest total CaCO3 precipitation yield achieved in an orthogonal experiment was 14 g/L. It can be concluded that Ralstonia eutropha H16 is a suitable bacterium for simultaneous activation of urea hydrolysis and nitrate reduction for improving the CaCO3 precipitation and it can be studied later, on activation of multiple metabolic pathways in bacteria-based self-healing concrete. [ABSTRACT FROM AUTHOR]

While numerous reports exist on the axenic culturing of different hydrogen-oxidizing bacteria (HOB), knowledge about the enrichment of microbial communities growing on hydrogen, oxygen, and carbon dioxide as sole carbon and energy sources remains negligible. We want to elucidate if in such enrichments, most enriched populations are HOBs or heterotrophic organisms. In the present study, bacteria enriched from a soil sample and grown over 5 transfers using a continuous supply of hydrogen, oxygen, and carbon dioxide to obtain an enriched autotrophic hydrogen-oxidizing microbiome. The success of the enrichment was evaluated by monitoring ammonium consumption and biomass concentration for 120 days. The shift in the microbial composition of the original soil inoculum and all transfers was observed based on 16S rRNA amplicon sequencing. The hydrogen-oxidizing facultative chemolithoautotroph Hydrogenophaga electricum was isolated and found to be one of the abundant species in most transfers. Moreover, Achromobacter was isolated both under heterotrophic and autotrophic conditions, which was characterized as a hydrogen-oxidizing bacterium. The HOB enrichment condition constructed in this study provided an environment for HOB to develop and conquer in all transfers. In conclusion, we showed that enrichments on hydrogen, oxygen, and carbon dioxide as sole carbon and energy sources contain a diverse mixture of HOB and heterotrophs that resulted in a collection of culturable isolates. These isolates can be useful for further investigation for industrial applications. [ABSTRACT FROM AUTHOR]

The suitability of using a spore-forming ureolytic strain, Bacillus sphaericus, was evaluated for self-healing of concrete cracks. The main focus was on alkaline tolerance, calcium tolerance, oxygen dependence, and low-temperature adaptability. Experimental results show that B. sphaericus had a good tolerance. It can grow and germinate in a broad range of alkaline pH. The optimal pH range is 7 ∼ 9. High alkaline conditions (pH 10 ∼ 11) slow down but not stop the growth and germination. Oxygen was strictly needed during bacterial growth and germination, but not an essential factor during bacterial urea decomposition. B. sphaericus also had a good Ca tolerance, especially at a high bacterial concentration of 10 cells/mL; no significant influence was observed on bacterial ureolytic activity of the presence of 0.9M Ca. Furthermore, at a low temperature (10 °C), bacterial spores germinated and revived ureolytic activity with some retardation. However, this retardation can be counteracted by using a higher bacterial concentration and by supplementing yeast extract. It can be concluded that B. sphaericus is a suitable bacterium for application in bacteria-based self-healing concrete. [ABSTRACT FROM AUTHOR]

Flow cytometry is a rapid and quantitative method to determine bacterial viability. Although different stains can be used to establish viability, staining protocols are inconsistent and lack a general optimization approach. Very few 'true' multicolor protocols, where dyes are combined in one sample, have been developed for microbiological applications. In this mini-review, the discrepancy between protocols for cell-permeant nucleic acid and functional stains are discussed as well as their use as viability dyes. Furthermore, optimization of staining protocols for a specific setup are described. Original data using the red-excitable SYTO dyes SYTO 59 to 64 and SYTO 17, combined with functional stains, for double and triple staining applications is also included. As each dye and dye combination behaves differently within a certain combination of medium matrix, microorganism, and instrument, protocols need to be tuned to obtain reproducible results. Therefore, single, double, and triple stains are reviewed, including the different parameters that influence staining such as stain kinetics, optimal stain concentration, and the effect of the chelator EDTA as membrane permeabilizer. In the last section, we highlight the need to investigate the stability of multicolor assays to ensure correct results as multiwell autoloaders are now commonly used. [ABSTRACT FROM AUTHOR]

Biorefineries allow the production of value-added chemicals, yet this also causes the formation of considerable amounts of wastewater that require suitable treatment. These biorefinery wastewaters often contain a high salinity, which inhibits methanogenesis. In this research, molasses were used to mimic these waste streams to evaluate their treatability by anaerobic digestion. Two different carrier materials, i.e., carbon felt and biochar, with similar surface properties were evaluated for their potential to stabilize anaerobic digestion of these wastewaters via active enrichment of the methanogenic community. Initial stable methane production values between 620 and 640 mL CH L day were reported in each treatment. At the end of the experiment, methane production decreased with more than 50 %, while VFA increased to values up to 20 g COD L, indicating severe process failure, due to the high potassium concentration in these wastewaters, irrespective of the presence of carrier material. However, an increased relative abundance of Methanosaetaceae both on the biochar and carbon felt was observed. In conclusion, this research demonstrated that carbon felt and biochar are both suitable carrier materials for selective enrichment of Methanosaetaceae, yet this did not lead to stable anaerobic digestion of a potassium-rich molasses waste stream. The increased relative abundance of Methanosaetaceae on both carrier materials can, nonetheless, be considered valuable in terms of alternative applications and warrants further research. [ABSTRACT FROM AUTHOR]

The beneficial effect of microbially induced carbonate precipitation on building materials has been gradually disclosed in the last decade. After the first applications of on historical stones, promising results were obtained with the respect of improved durability. An extensive study then followed on the application of this environmentally friendly and compatible material on a currently widely used construction material, concrete. This review is focused on the discussion of the impact of the two main applications, bacterial surface treatment and bacteria based crack repair, on concrete durability. Special attention was paid to the choice of suitable bacteria and the metabolic pathway aiming at their functionality in concrete environment. Interactions between bacterial cells and cementitious matrix were also elaborated. Furthermore, recommendations to improve the effectiveness of bacterial treatment are provided. Limitations of current studies, updated applications and future application perspectives are shortly outlined. [ABSTRACT FROM AUTHOR]

The methane removal capacity of mixed methane-oxidizing bacteria (MOB) culture in a biofilter setup using autoclaved aerated concrete (AAC) as a highly porous carrier material was tested. Batch experiment was performed to optimize MOB immobilization on AAC specimens where optimum methane removal was obtained when calcium chloride was not added during bacterial inoculation step and 10-mm-thick AAC specimens were used. The immobilized MOB could remove methane at low concentration (~1000 ppmv) in a biofilter setup for 127 days at average removal efficiency (RE) of 28.7 %. Unlike a plug flow reactor, increasing the total volume of the filter by adding a biofilter in series did not result in higher total RE. MOB also exhibited a higher abundance at the bottom of the filter, in proximity with the methane gas inlet where a high methane concentration was found. Overall, an efficient methane biofilter performance could be obtained using AAC as the carrier material. [ABSTRACT FROM AUTHOR]

Methane-oxidizing cultures from five different inocula were enriched to be used for co-metabolic degradation of micropollutants. In a first screening, 18 different compounds were tested for degradation with the cultures as well as with four pure methane-oxidizing bacterial (MOB) strains. The tested compounds included pharmaceuticals, chemical additives, pesticides, and their degradation products. All enriched cultures were successful in the degradation of at least four different pollutants, but the compounds degraded most often were sulfamethoxazole (SMX) and benzotriazole (BTZ). Addition of acetylene, a specific methane monooxygenase (MMO) inhibitor, revealed that SMX and BTZ were mainly degraded co-metabolically by the present MOB. The pure MOB cultures exhibited less degradation potential, while SMX and BTZ were also degraded by three of the four tested pure strains. For MOB, copper (Cu) concentration is often an important factor, as several species have the ability to express a soluble MMO (sMMO) if the Cu concentration is low. In literature, this enzyme is often described to have a broader compound range for co-metabolic degradation of pollutants, in particular when it comes to aromatic structures. However, this study indicated that co-metabolic degradation of the aromatic compounds SMX and BTZ was possible at high Cu concentration, most probably catalyzed by pMMO. [ABSTRACT FROM AUTHOR]

Anaerobic digestion is considered a key technology for the future bio-based economy. The microbial consortium carrying out the anaerobic digestion process is quite complex, and its exact role in terms of 'elasticity', i.e., the ability to rapidly adapt to changing conditions, is still unknown. In this study, the role of the initial microbial community in terms of operational stability and stress tolerance was evaluated during a 175-day experiment. Five different inocula from stable industrial anaerobic digesters were fed a mixture of waste activated sludge and glycerol. Increasing ammonium pulses were applied to evaluate stability and stress tolerance. A different response in terms of start-up and ammonium tolerance was observed among the different inocula. Methanosaetaceae were the dominant acetoclastic methanogens, yet, Methanosarcinaceae increased in abundance at elevated ammonium concentrations. A shift from a Firmicutes to a Proteobacteria dominated bacterial community was observed in failing digesters. Methane production was strongly positively correlated with Methanosaetaceae, but also with Bacteria related to Anaerolinaceae, Clostridiales, and Alphaproteobacteria. Volatile fatty acids were strongly positively correlated with Betaproteobacteria and Bacteroidetes, yet ammonium concentration only with Bacteroidetes. Overall, these results indicate the importance of inoculum selection to ensure stable operation and stress tolerance in anaerobic digestion. [ABSTRACT FROM AUTHOR]

Within sustainable resource management, the recovery of nitrogen and phosphorus nutrients from waste streams is becoming increasingly important. Although the use of microalgae has been described extensively in environmental biotechnology, the potential of nitrate-accumulating microalgae for nutrient recovery has not been investigated yet. The ability of these marine microorganisms to concentrate environmental nitrate within their biomass is remarkable. The aim of this study was to investigate the application potential of nitrate-accumulating diatoms for nutrient recovery from marine wastewaters. The intracellular nitrate storage capacity was quantified for six marine diatom strains in synthetic wastewater. Amphora coffeaeformis and Phaeodactylum tricornutum stored the highest amount of nitrate with respectively 3.15 and 2.10 g N L of cell volume, which accounted for 17.3 and 4.6 %, respectively, of the total nitrogen content. The growth and nitrate and phosphate uptake of both diatoms were further analyzed and based on these features P. tricornutum showed the highest potential for nutrient recovery. A mathematical model was developed which included intracellular nitrate storage and the kinetic parameters were derived for P. tricornutum. Furthermore, a simulation study was performed to compare the performance of a proposed microalgal nutrient recovery unit with a conventional denitrification system for marine wastewater treatment. Overall, this study demonstrates the potential application of P. tricornutum for saline wastewater treatment with concurrent nitrogen and phosphorus recycling. [ABSTRACT FROM AUTHOR]

Nitrification is a well-studied and established process to treat ammonia in wastewater. Although thermophilic nitrification could avoid cooling costs for the treatment of warm wastewaters, applications above 40 °C remain a significant challenge. This study tested the effect of salinity on the thermotolerance of mesophilic nitrifying sludge (34 °C). In batch tests, 5 g NaCl L increased the activity of aerobic ammonia-oxidizing bacteria (AerAOB) by 20-21 % at 40 and 45 °C. For nitrite-oxidizing bacteria (NOB), the activity remained unaltered at 40 °C, yet decreased by 83 % at 45 °C. In a subsequent long-term continuous reactor test, temperature was increased from 34 to 40, 42.5, 45, 47.5 and 50 °C. The AerAOB activity showed 65 and 37 % higher immediate resilience in the salt reactor (7.5 g NaCl L) for the first two temperature transitions and lost activity from 45 °C onwards. NOB activity, in contrast to the batch tests, was 37 and 21 % more resilient in the salt reactor for the first two transitions, while no difference was observed for the third temperature transition. The control reactor lost NOB activity at 47.5 °C, while the salt reactor only lost activity at 50 °C. Overall, this study demonstrates salt amendment as a tool for a more efficient temperature transition for mesophilic sludge (34 °C) and eventually higher nitrification temperatures. [ABSTRACT FROM AUTHOR]

Biological treatment using methane-oxidizing bacteria (MOB) immobilized on six porous carrier materials have been used to mitigate methane emission. Experiments were performed with different MOB inoculated in building materials at high (~20 % (v/v)) and low (~100 ppmv) methane mixing ratios. Methylocystis parvus in autoclaved aerated concrete (AAC) exhibited the highest methane removal rate at high (28.5 ± 3.8 μg CH g building material h) and low (1.7 ± 0.4 μg CH g building material h) methane mixing ratio. Due to the higher volume of pores with diameter >5 μm compared to other materials tested, AAC was able to adsorb more bacteria which might explain for the higher methane removal observed. The total methane and carbon dioxide-carbon in the headspace was decreased for 65.2 ± 10.9 % when M. parvus in Ytong was incubated for 100 h. This study showed that immobilized MOB on building materials could be used to remove methane from the air and also act as carbon sink. [ABSTRACT FROM AUTHOR]

Methane (CH) release from wetlands is an important source of greenhouse gas emissions. Gas exchange occurs mainly through the aerenchyma of plants, and production of greenhouse gases is heavily dependent on rhizosphere biogeochemical conditions (i.e. substrate availability and redox potential). It is hypothesized that by introducing a biocatalyzed anode electrode in the rhizosphere of wetland plants, a competition for carbon and electrons can be invoked between electrical current-generating bacteria and methanogenic Archaea. The anode electrode is part of a bioelectrochemical system (BES) capable of harvesting electrical current from microbial metabolism. In this work, the anode of a BES was introduced in the rhizosphere of rice plants ( Oryza sativa), and the impact on methane emissions was monitored. Microbial current generation was able to outcompete methanogenic processes when the bulk matrix contained low concentrations of organic carbon, provided that the electrical circuit with the effective electroactive microorganisms was in place. When interrupting the electrical circuit or supplying an excess of organic carbon, methanogenic metabolism was able to outcompete current generating metabolism. The qPCR results showed hydrogenotrophic methanogens were the most abundant methanogenic group present, while mixotrophic or acetoclastic methanogens were hardly detected in the bulk rhizosphere or on the electrodes. Competition for electron donor and acceptor were likely the main drivers to lower methane emissions. Overall, electrical current generation with BESs is an interesting option to control CH emissions from wetlands but needs to be applied in combination with other mitigation strategies to be successful and feasible in practice. [ABSTRACT FROM AUTHOR]

In situ bioreactive capping is a promising technology for mitigation of surface water contamination by discharging polluted groundwater. Organohalide respiration (OHR) of chlorinated ethenes in bioreactive caps can be stimulated through incorporation of solid polymeric organic materials (SPOMs) that provide a sustainable electron source for organohalide respiring bacteria. In this study, wood chips, hay, straw, tree bark and shrimp waste, were assessed for their long term applicability as an electron donor for OHR of cis-dichloroethene (cDCE) and vinyl chloride (VC) in sediment microcosms. The initial release of fermentation products, such as acetate, propionate and butyrate led to the onset of extensive methane production especially in microcosms amended with shrimp waste, straw and hay, while no considerable stimulation of VC dechlorination was obtained in any of the SPOM amended microcosms. However, in the longer term, short chain fatty acids accumulation decreased as well as methanogenesis, whereas high dechlorination rates of VC and cDCE were established with concomitant increase of Dehalococcoides mccartyi and vcrA and bvcA gene numbers both in the sediment and on the SPOMs. A numeric simulation indicated that a capping layer of 40 cm with hay, straw, tree bark or shrimp waste is suffice to reduce the groundwater VC concentration below the threshold level of 5 μg/l before discharging into the Zenne River, Belgium. Of all SPOMs, the persistent colonization of tree bark by D. mccartyi combined with the lowest stimulation of methanogenesis singled out tree bark as a long-term electron donor for OHR of cDCE/VC in bioreactive caps. [ABSTRACT FROM AUTHOR]

Energy-positive sewage treatment can be achieved by implementation of oxygen-limited autotrophic nitrification/denitrification (OLAND) in the main water line, as the latter does not require organic carbon and therefore allows maximum energy recovery through anaerobic digestion of organics. To test the feasibility of mainstream OLAND, the effect of a gradual temperature decrease from 29 to 15 °C and a chemical oxygen demand (COD)/N increase from 0 to 2 was tested in an OLAND rotating biological contactor operating at 55–60 mg NH 4+–N L −1 and a hydraulic retention time of 1 h. Moreover, the effect of the operational conditions and feeding strategies on the reactor cycle balances, including NO and N 2O emissions were studied in detail. This study showed for the first time that total nitrogen removal rates of 0.5 g N L −1 day −1 can be maintained when decreasing the temperature from 29 to 15 °C and when low nitrogen concentration and moderate COD levels are treated. Nitrite accumulation together with elevated NO and N 2O emissions (5 % of N load) were needed to favor anammox compared with nitratation at low free ammonia (<0.25 mg N L −1), low free nitrous acid (<0.9 μg N L −1), and higher DO levels (3–4 mg O 2 L −1). Although the total nitrogen removal rates showed potential, the accumulation of nitrite and nitrate resulted in lower nitrogen removal efficiencies (around 40 %), which should be improved in the future. Moreover, a balance should be found in the future between the increased NO and N 2O emissions and a decreased energy consumption to justify OLAND mainstream treatment. [ABSTRACT FROM AUTHOR]

The biomass of industrially grown Phaeodactylum tricornutum was subjected in a novel way to bio-methanation at 33°C, i.e., in an anaerobic membrane bioreactor (AnMBR) at a hydraulic retention time of 2.5 days, at solid retention times of 20 to 10 days and at loading rates in the range of 2.6-5.9 g biomass-COD L day with membrane fluxes ranging from 1 to 0.8 L m h. The total COD recovered as biogas was in the order of 52%. The input suspension was converted to a clear effluent rich in total ammonium nitrogen (546 mg TAN L) and phosphate (141 mg PO-P L) usable as liquid fertilizer. The microbial community richness, dynamics, and organization in the reactor were interpreted using the microbial resource management approach. The AnMBR communities were found to be moderate in species richness and low in dynamics and community organization relative to UASB and conventional CSTR sludges. Quantitative polymerase chain reaction analysis revealed that Methanosaeta sp. was the dominant acetoclastic methanogen species followed by Methanosarcina sp. This work demonstrated that the use of AnMBR for the digestion of algal biomass is possible. The fact that some 50% of the organic matter is not liquefied means that the algal particulates in the digestate constitute a considerable fraction which should be valorized properly, for instance as slow release organic fertilizer. Overall, 1 kg of algae dry matter (DM) could be valorized in the form of biogas (€2.07), N and P in the effluent (€0.02) and N and P in the digestate (€0.04), thus totaling about €2.13 per kilogram algae DM. [ABSTRACT FROM AUTHOR]

A new biological inspired method to produce nanopalladium is the precipitation of Pd on a bacterium, i.e., bio-Pd. This bio-Pd can be applied as catalyst in dehalogenation reactions. However, large amounts of hydrogen are required as electron donor in these reactions resulting in considerable costs. This study demonstrates how bacteria, cultivated under fermentative conditions, can be used to reductively precipitate bio-Pd catalysts and generate the electron donor hydrogen. In this way, one could avoid the costs coupled to hydrogen supply. The catalytic activities of Pd(0) nanoparticles produced by different strains of bacteria (bio-Pd) cultivated under fermentative conditions were compared in terms of their ability to dehalogenate the recalcitrant aqueous pollutants diatrizoate and trichloroethylene. While all of the fermentative bio-Pd preparations followed first order kinetics in the dehalogenation of diatrizoate, the catalytic activity differed systematically according to hydrogen production and starting Pd(II) concentration in solution. Batch reactors with nanoparticles formed by Citrobacter braakii showed the highest diatrizoate dehalogenation activity with first order constants of 0.45 ± 0.02 h and 5.58 ± 0.6 h in batches with initial concentrations of 10 and 50 mg L Pd, respectively. Nanoparticles on C. braakii, used in a membrane bioreactor treating influent containing 20 mg L diatrizoate, were capable of dehalogenating 22 mg diatrizoate mg Pd over a period of 19 days before bio-Pd catalytic activity was exhausted. This study demonstrates the possibility to use the combination of Pd(II), a carbon source and bacteria under fermentative conditions for the abatement of environmental halogenated contaminants. [ABSTRACT FROM AUTHOR]

In a previous study, biogenic silver nanoparticles were produced by Lactobacillus fermentum which served as a matrix preventing aggregation. In this study the antibacterial activity of this biogenic silver was compared to ionic silver and chemically produced nanosilver. The minimal inhibitory concentration (MIC) was tested on Gram-positive and Gram-negative bacteria and was comparable for biogenic silver and ionic silver ranging from 12.5 to 50 mg/L. In contrast, chemically produced nanosilver had a much higher MIC of at least 500 mg/L, due to aggregation upon application. The minimal bactericidal concentration (MBC) in drinking water varied from 0.1 to 0.5 mg/L for biogenic silver and ionic silver, but for chemically produced nanosilver concentrations, up to 12.5 mg/L was needed. The presence of salts and organic matter decreased the antimicrobial activity of all types of silver resulting in a higher MBC and a slower inactivation of the bacteria. The mode of action of biogenic silver was mainly attributed to the release of silver ions due to the high concentration of free silver ions measured and the resemblance in performance between biogenic silver and ionic silver. Radical formation by biogenic silver and direct contact were found to contribute little to the antibacterial activity. In conclusion, biogenic nanosilver exhibited equal antimicrobial activity compared to ionic silver and can be a valuable alternative for chemically produced nanosilver. [ABSTRACT FROM AUTHOR]

The oxygen-limited autotrophic nitrification/denitrification (OLAND) process comprises one-stage partial nitritation and anammox, catalyzed by aerobic and anoxic ammonium-oxidizing bacteria (AerAOB and AnAOB), respectively. The goal of this study was to investigate whether quorum sensing influences anoxic ammonium oxidation in an OLAND biofilm, with AnAOB colonizing 13% of the biofilm, as determined with fluorescent in situ hybridization (FISH). At high biomass concentrations, the specific anoxic ammonium oxidation rate of the OLAND biofilm significantly increased with a factor of 1.5 ± 0.2 compared to low biomass concentrations. Supernatant obtained from the biofilm showed no ammonium-oxidizing activity on itself, but its addition to low OLAND biomass concentrations resulted in a significant activity increase of the biomass. In the biofilm supernatant, the presence of long-chain acylhomoserine lactones (AHLs) was shown using the reporter strain Chromobacterium violaceum CV026, and one specific AHL, N-dodecanoyl homoserine lactone (C-HSL), was identified via LC-MS/MS. Furthermore, C-HSL was detected in an AnAOB-enriched community, but not in an AerAOB-enriched community. Addition of C-HSL to low OLAND biomass concentrations resulted in a significantly higher ammonium oxidation rate ( p < 0.05). To our knowledge, this is the first report demonstrating that AHLs enhance the anoxic ammonium oxidation process. Future work should confirm which species are responsible for the in situ production of C-HSL in AnAOB-based applications. [ABSTRACT FROM AUTHOR]

In a microbial electrolysis cell (MEC), hydrolysate produced by hydrothermal treatment of wheat straw was used for hydrogen production during selective recovery of phenols. The average H production rate was 0.61 m H/m MEC·day and equivalent to a rate of 0.40 kg COD/m MEC·day. The microbial community in the anode biofilm was adapted by establishment of xylose-degrading bacteria of the Bacteriodetes phylum (16%) and Geobacter sulfurreducens (49%). During the process, 61% of the chemical oxygen demand was removed as hydrogen at 64% yield. The total energy production yield was 78% considering the energy content in the consumed compounds and the cell voltage of 0.7 V. The highest hydrogen production was equivalent to 0.8 kg COD/m MEC·day and was obtained at pH 7-8 and 25°C. Accumulation of 53% w/v phenolic compounds in the liquor was obtained by stepwise addition of the hydrolysate during simultaneous production of hydrogen from consumption of 95% for the hemicellulose and 100% of the fatty acids. Final calculations showed that hydrolysate produced from 1 kg wheat straw was upgraded by means of the MEC to 22 g hydrogen (266 L), 8 g xylan, and 9 g polyphenolics for potential utilization in biobased materials. [ABSTRACT FROM AUTHOR]

In this study, the microbial community characteristics in continuous lab-scale anaerobic reactors were correlated to reactor functionality using the microbial resource management (MRM) approach. Two molecular techniques, denaturing gradient gel electrophoresis (DGGE) and terminal-restriction fragment length polymorphism (T-RFLP), were applied to analyze the bacterial and archaeal communities, and the results obtained have been compared. Clustering analyses showed a similar discrimination of samples with DGGE and T-RFLP data, with a clear separation between the meso- and thermophilic communities. Both techniques indicate that bacterial and mesophilic communities were richer and more even than archaeal and thermophilic communities, respectively. Remarkably, the community composition was highly dynamic for both Bacteria and Archaea, with a rate of change between 30% and 75% per 18 days, also in stable performing periods. A hypothesis to explain the latter in the context of the converging metabolism in anaerobic processes is proposed. Finally, a more even and diverse bacterial community was found to be statistically representative for a well-functioning reactor as evidenced by a low Ripley index and high biogas production. [ABSTRACT FROM AUTHOR]

Effluents of anaerobic digesters are an underestimated source of greenhouse gases, as they are often saturated with methane. A post-treatment with methane-oxidizing bacterial consortia could mitigate diffuse emissions at such sites. Semi-continuously fed stirred reactors were used as model systems to characterize the influence of the key parameters on the activity of these mixed methanotrophic communities. The addition of 140 mg L−1 NH–N had no significant influence on the activity nor did a temperature increase from 28°C to 35°C. On the other hand, addition of 0.64 mg L−1 of copper(II) increased the methane removal rate by a factor of 1.5 to 1.7 since the activity of particulate methane monooxygenase was enhanced. The influence of different concentrations of NaCl was also tested, as effluents of anaerobic digesters often contain salt levels up to 10 g NaCl L−1. At a concentration of 11 g NaCl L−1, almost no methane-oxidizing activity was observed in the reactors without copper addition. Yet, reactors with copper addition exhibited a sustained activity in the presence of NaCl. A colorimetric test based on naphthalene oxidation showed that soluble methane monooxygenase was inhibited by copper, suggesting that the particulate methane monooxygenase was the active enzyme and thus more salt resistant. The results obtained demonstrate that the treatment of methane-saturated effluents, even those with increased ammonium (up to 140 mg L−1 NH–N) and salt levels, can be mitigated by implementation of methane-oxidizing microbial consortia. [ABSTRACT FROM AUTHOR]

The present study reports the disinfection effects of chemically and electrochemically dosed chlorine on two models for typical water-borne bacteria ( Escherichia coli and Legionella beliardensis) by plating and flow cytometry (FCM) in combination with different fluorescence dyes. The residual effect on various cell functions, including cultivability, esterase activity, membrane polarization, and integrity, was tested at different free chlorine concentrations. In comparison, chemical disinfection yielded on average 60% more E. coli cells entering the viable but nonculturable (VBNC) state than electrochemical disinfection. Here, VBNC is defined as those cells with intact cell membrane but which cannot be cultured on solid nutrient agar plates. L. beliardensis was about five times more resistant to chlorine disinfection than E. coli. The results also suggested the two methods result in different disinfection mechanisms on L. beliardensis, i.e., chemically dosed chlorine targeted cell membrane integrity before enzyme activity, while electrochemically dosed chlorine acted the other way round. In addition, both bacteria lost the integrity of their cell membranes at three times lower chlorine concentration over a longer contact time (i.e., 40 vs. 10 min) by the chemical method. Our results showed that FCM is an appropriate tool to evaluate the effects of water disinfection and the percentage of cells in VBNC in a matter of hours. Electrochemical disinfection is suggested to be a favorable alternative for chemical disinfection. [ABSTRACT FROM AUTHOR]

The bacterial storage polymer poly-β-hydroxybutyrate (PHB) has the potential to be used as an alternative anti-infective strategy for aquaculture rearing. In this research, the effects of (partially) replacing the feed of European sea bass juveniles with PHB were investigated. During a 6-week trial period, the PHB showed the ability to act as an energy source for the fish. This indicated that PHB was degraded and used during gastrointestinal passage. The gut pH decreased from 7.7 to 7.2 suggesting that the presence of PHB in the gut led to the increased production of (short-chain fatty) acids. The diets supplemented with 2% and 5% PHB ( w/ w) induced a gain of the initial fish weight with a factor 2.4 and 2.7, respectively, relative to a factor 2.2 in the normal feed treatment. Simultaneously, these treatments showed the highest bacterial range-weighted richness in the fish intestine. Based on molecular analysis, higher dietary PHB levels induced larger changes in the bacterial community composition. From our results, it seems that PHB can have a beneficial effect on fish growth performance and that the intestinal bacterial community structure may be closely related to this phenomenon. [ABSTRACT FROM AUTHOR]

There is a growing demand for silver-based biocides, including both ionic silver forms and metallic nanosilver. The use of metallic nanosilver, typically chemically produced, faces challenges including particle agglomeration, high costs, and upscaling difficulties . Additionally, there exists a need for the development of a more eco-friendly production of nanosilver. In this study, Gram-positive and Gram-negative bacteria were utilized in the non-enzymatic production of silver nanoparticles via the interaction of silver ions and organic compounds present on the bacterial cell. Only lactic acid bacteria, Lactobacillus spp., Pediococcus pentosaceus, Enterococcus faecium, and Lactococcus garvieae, were able to reduce silver. The nanoparticles of the five best producing Lactobacillus spp. were examined more into detail with transmission electron microscopy. Particle localization inside the cell, the mean particle size, and size distribution were species dependent, with Lactobacillus fermentum having the smallest mean particle size of 11.2 nm, the most narrow size distribution, and most nanoparticles associated with the outside of the cells. Furthermore, influence of pH on the reduction process was investigated. With increasing pH, silver recovery increased as well as the reduction rate as indicated by UV–VIS analyses. This study demonstrated that Lactobacillus spp. can be used for a rapid and efficient production of silver nanoparticles. [ABSTRACT FROM AUTHOR]

The rate of anodic electron transfer is one of the factors limiting the performance of microbial fuel cells (MFCs). It is known that phenazine-based metabolites produced by Pseudomonas species can function as electron shuttles for Pseudomonas themselves and also, in a syntrophic association, for Gram-positive bacteria. In this study, we have investigated whether phenazine-based metabolites and their producers could be used to improve the electricity generation of a MFC operated with a mixed culture. Both anodic supernatants obtained from MFCs operated with a Pseudomonas strain (P-PCA) producing phenazine-1-carboxylic acid (PCA) and those from MFCs operated with a strain (P-PCN) producing phenazine-1-carboxamide (PCN) exerted similarly positive effects on the electricity generation of a mixed culture. Replacing supernatants of MFCs operated with a mixed culture with supernatants of MFCs operated with P-PCN could double the currents generated. Purified PCA and purified PCN had similar effects. If the supernatant of an engineered strain overproducing PCN was used, the effect could be maintained over longer time courses, resulting in a 1.5-fold increase in the production of charge. Bioaugmentation of the mixed culture MFCs using slow release tubes containing P-PCN not only doubled the currents but also maintained the effect over longer periods. The results demonstrated the electron-shuttling effect of phenazine-based compounds produced by Pseudomonas species and their capacity to improve the performance of MFCs operated with mixed cultures. [ABSTRACT FROM AUTHOR]

Previous studies revealed the abundance of Pseudomonas sp. in the microbial community of a microbial fuel cell (MFC). These bacteria can transfer electrons to the electrode via self-produced phenazine-based mediators. A MFC fed with acetate where several Pseudomonas sp. were present was found to be rich in a Gram-positive bacterium, identified as Brevibacillus sp. PTH1. Remarkably, MFCs operated with only the Brevibacillus strain in their anodes had poor electricity generation. Upon replacement of the anodic aqueous part of Brevibacillus containing MFCs with the cell-free anodic supernatants of MFCs operated with Pseudomonas sp. CMR12a, a strain producing considerable amounts of phenazine-1-carboxamide (PCN) and biosurfactants, the electricity generation was improved significantly. Supernatants of Pseudomonas sp. CMR12a_Reg, a regulatory mutant lacking the ability to produce PCN, had no similar improvement effect. Purified PCN, together with rhamnolipids as biosurfactants (1 mg L−1), could clearly improve electricity generation by Brevibacillus sp. PTH1, as well as enable this bacterium to oxidize acetate with concomitant reduction of ferric iron, supplied as goethite (FeOOH). When added alone, PCN had no observable effects on Brevibacillus’ electron transfer. This work demonstrates that metabolites produced by Pseudomonas sp. enable Gram-positive bacteria to achieve extracellular electron transfer. Possibly, this bacterial interaction is a key process in the anodic electron transfer of a MFC, enabling Brevibacillus sp. PTH1 to achieve its dominance. [ABSTRACT FROM AUTHOR]

Ammonium can be removed as dinitrogen gas by cooperating aerobic and anaerobic ammonium-oxidizing bacteria (AerAOB and AnAOB). The goal of this study was to verify putative mutual benefits for aggregated AerAOB and AnAOB in a stagnant freshwater environment. In an ammonium fed water column, the biological oxygen consumption rate was, on average, 76 kg O2 ha−1 day−1. As the oxygen transfer rate of an abiotic control column was only 17 kg O2 ha−1 day−1, biomass activity enhanced the oxygen transfer. Increasing the AnAOB gas production increased the oxygen consumption rate with more than 50% as a result of enhanced vertical movement of the biomass. The coupled decrease in dissolved oxygen concentration increased the diffusional oxygen transfer from the atmosphere in the water. Physically preventing the biomass from rising to the upper water layer instantaneously decreased oxygen and ammonium consumption and even led to the occurrence of some sulfate reduction. Floating of the biomass was further confirmed to be beneficial, as this allowed for the development of a higher AerAOB and AnAOB activity, compared to settled biomass. Overall, the results support mutual benefits for aggregated AerAOB and AnAOB, derived from the biomass uplifting effect of AnAOB gas production. [ABSTRACT FROM AUTHOR]

In order to improve wastewater treatment processes, a need exists for tools that rapidly give detailed insight into the community structure of activated sludge, supplementary to chemical and physical data. In this study, the advantages of microarrays and quantitative polymerase chin reaction (PCR) methods were combined into a real-time PCR assay that allows the simultaneous quantification of phylogenetic and functional genes involved in nitrification and denitrification processes. Simultaneous quantification was possible along a 5-log dynamic range and with high linear correlation ( R 2 > 0.98). The specificity of the assay was confirmed by cloning and sequencing analyses of PCR amplicons obtained from activated sludge. The real-time assay was validated on mixed liquid samples of different treatment plants, which varied in nitrogen removal rate. The abundance of ammonia oxidizers was in the order of magnitude of 106 down to 104 ml−1, whereas nitrite oxidizers were less abundant (103–101 order of magnitude). The results were in correspondence with the nitrite oxidation rate in the sludge types. As for the nirS, nirK, and nosZ gene copy numbers, their abundance was generally in the order of magnitude of 108–105. When sludge samples were subjected to lab-scale perturbations, a decrease in nitrification rate was reflected within 18 h in the copy numbers of nitrifier genes (decrease with 1 to 5 log units), whereas denitrification genes remained rather unaffected. These results demonstrate that the method is a fast and accurate tool for the analysis of the (de)nitrifying community structure and size in both natural and engineered environmental samples. [ABSTRACT FROM AUTHOR]

The biomass of an oxygen-limited autotrophic nitrification/denitrification (OLAND) biofilm reactor was preserved in various ways to find a storage method for both aerobic and anaerobic ammonium-oxidizing bacteria (AerAOB and AnAOB). Storage occurred at −20°C with and without glycerol as cryoprotectant and at 4 and 20°C with and without nitrate as redox buffer. After 2 and 5 months, reactivation of AerAOB and AnAOB was achieved with the biomass stored at 4°C with and without nitrate and at 20°C with nitrate. Moreover, the presence of the AerAOB and AnAOB was confirmed with fluorescent in situ hybridization (FISH). Preservation in a nitrate environment resulted in a lag phase for the AnAOB reactivation. The supplied nitrate was denitrified during storage, and a real-time polymerase chain reaction with nitrifying and denitrifying genes allowed to estimate that at least 1.0 to 6.0% of the OLAND biofilm consisted of denitrifiers. It was concluded that reactivation after long-term storage is possible and that preservation at 4°C without nitrate addition is the recommended storage technique. The possibility to store OLAND biomass will facilitate research on AnAOB and can overcome larger-scale start-up and inhibition problems of novel nitrogen processes involving AnAOB. [ABSTRACT FROM AUTHOR]

In this study, 16S rRNA- and rDNA-based denaturing gradient gel electrophoresis (DGGE) were used to study the temporal and spatial evolution of the microbial communities in a compost biofilter removing H2S and in a control biofilter without H2S loading. During the first 81 days of the experiment, the H2S removal efficiencies always exceeded 93% at loading rates between 4.1 and 30 g m−3 h−1. Afterwards, the H2S removal efficiency decreased to values between 44 and 71%. RNA-based DGGE analysis showed that H2S loading to the biofilter increased the stability of the active microbial community but decreased the activity-based diversity and evenness. The most intense band in both the RNA- and DNA-based DGGE patterns of the H2S-degrading biofilter represented the sulfur oxidizing bacterium Thiobacillus thioparus. This suggested that T. thioparus constituted a major part of the bacterial community and was an important primary degrader in the H2S-degrading biofilter. The decreasing H2S removal efficiencies near the end of the experiment were not accompanied by a substantial change of the DGGE patterns. Therefore, the decreased H2S removal was probably not caused by a failing microbiology but rather by a decrease of the mass transfer of substrates after agglutination of the compost particles. [ABSTRACT FROM AUTHOR]

Primers targeting 16S rRNA genes were designed to detect and quantify Eikelboom type 021N organisms by real-time PCR. Eikelboom type 021N filamentous bulking was induced in a laboratory-scale sequencing batch reactor and the evolution of Eikelboom type 021N 16S rRNA and 16S rRNA genes was monitored. A significant correlation was found between the sludge volume index and the amount of these filamentous organisms present in the sludge ( r 2=94.6%, n=10, P<0.01), as measured by real-time PCR. The amount of Eikelboom type 021N 16S rRNA genes increased by a factor of 21 during the experiment, while the 16S rRNA increased by a factor of 33. Moreover, Eikelboom type 021N 16S rRNA increased with increased feeding frequency. It was observed that the RNA:DNA ratio peaked before the sludge volume index increased. In parallel, a fluorescence in situ hybridization study indicated a factor of four increase in the length of Eikelboom type 021N filaments, due to a factor of two increase in both length and number of Eikelboom type 021N filaments. Further, an increase in the fraction of filaments extending outside the activated sludge flocs was observed (19–55%). Monitoring of 16S rRNA genes and 16S rRNA of Eikelboom type 021N was shown to be valuable in evaluating activated sludge settling characteristics; and measuring RNA:DNA ratios may be used as an early warning tool for sludge bulking. [ABSTRACT FROM AUTHOR]