Search

High polarization of ferroelectric materials has profound research significance and is the decisive factor in the application of energy storage, pyroelectricity, and explosive energy conversion. Herein, in force-electric conversion field, an ultrahigh remanent polarization (51.43 μC/cm2) and record-breaking energy density (4.59 J/cm3) after poling were achieved with a lead-free (1 − x)Bi0.5Na0.5TiO3 − xAgNbO3 [(1 − x)BNT – xAN] relaxor ceramics. The enhancement effect of AgNbO3 on polarization is attributed to the increase in lattice distortion and orientation after poling. Additionally, a significant force-electric conversion effect under hydrostatic pressure (depolarization rate ∼44.8%, 400 MPa) and shock pressure (depolarization rate ∼54.4%, 6.3 GPa) in (1 − x)BNT – xAN was attributed to the pressure-driven ferroelectric/relaxor (FE/RE) phase transition. This work is expected to enlighten the further design of ferroelectric materials with high polarization for pulse power energy conversion application. [ABSTRACT FROM AUTHOR]

The pulsed power supply that generates megawatts of electrical power has drawn important attention for many decades. Despite that the large energy output has been obtained in lead-containing materials such as Pb(Zr0.95Ti0.05)O3 (PZT95/5) ceramics, lead-free ferroelectric candidates are highly desired due to the environmental concerns. In this work, we report the depolarization behavior of lead-free ternary 0.99[0.98(Bi0.5Na0.5)(Ti0.995Mn0.005)O3-0.02BiAlO3]-0.01NaNbO3 ferroelectric ceramics under shock wave compression. A current profile with a maximum value of ∼25 A and a FWHM of ∼2.3 μs was obtained. Particularly, the poled BNT-BA-0.01NN ceramics were almost completely depolarized under high strain rate loading, releasing a high charge density J of 38 μC/cm2. The released J was approximately 96% of thermal-induced charge density (∼40 μC/cm2), which was 18% higher than that of PZT95/5 ceramics. The shock-induced depolarization mechanism can be attributed to the ferroelectric-ergodic relaxor phase transition. These results reveal the BNT-based ceramics as promising candidates for pulsed power applications. [ABSTRACT FROM AUTHOR]

Cax(Sr0.5Ba0.5)1-xNb2O6 [CSBN(x), x = 0.00, 0.10, 0.15, and 0.20] lead-Free ceramics were prepared by a traditional solid-state reaction technique. Dielectric, ferroelectric, and pyroelectric properties of CSBN(x) lead-Free ceramics were systematically investigated. The pyroelectric properties of CSBN(x) have been enhanced remarkably due to Ca addition and reached the maximum values at x = 0.15, with pyroelectric coefficient of 3.61 × 10-8 C/cm2 K and pyroelectric figure of merit of Fi = 172 pm/V, Fv = 0.021 m2/C, and Fd = 11.5 μPa-1/2, which are superior to other lead-free ferroelectric ceramics. These results indicate the potential of CSBN(x) ceramics for infrared detector applications. [ABSTRACT FROM AUTHOR]